Governmental Committees:

Transcription

1 SHORT C.V. Mohamed Nabil Hassan Hilmy El-Atrouzy B.Sc. (1965), M.Sc. (1969), Ph.D. (1972) Professor (1983), Associate Professor (1978), Assistant Professor (1973). Permanent Address: 83 El-Merghani Street, Apt.# 10, Heliopolis Cairo-EGYPT. Mobile : & E Mail:natrouzy@gmail.com & mohamed_elatrouzy@eng.asu.edu.eg Previous Administrative Positions: Former Chairman of Board National Housing and Building Research Center of EGYPT Ministry of Housing, Utility and Urban Communities. Former Vice Dean of Engineering Faculty of Engineering. Ain Shams Former Head of the structural engineering department. Faculty of Engineering. Former Chairman of the civil engineering department, Faculty of engineering - United Arab Emirates Al-Ain, UAE Governmental Committees: Chairman of the Permanent Committee for promoting full professors in structural engineering and construction - The Egyptian universities supreme council. Member of the Ministerial committee for the Egyptian Code of practice for the design and construction of steel structures and bridges. Member of the Ministerial committee for the Egyptian Code of practice for loads on structures and bridges. Member of the Ministerial committee for the Egyptian Scientific Research Academy - Construction and Structural Engineering. Former Member of University Council for Education & Students' Affairs. Former Member of the University Committee for Establishing the Examinations' Rules at UAE United Arab Emirates. Former Member of the University Committee for Curriculums and Study Plans at UAE United Arab Emirates. Former Chairman of the education technology sector at University Development Center. 1

2 Personal Data Date of Birth : 21, August, 1943 Nationality : Egyptian Marital status : Married - two children Higher Education Ph.D. : University of Windsor, Ontario, Canada (1972) Specialization : Civil Engineering, (Major : Structures) Courses : Ph.D. Thesis : Theory of Elasticity (1) - Theory of Elasticity (2) - Advanced Structural Analysis - Experimental Stress Analysis Cylindrical Shells Made of Corrugated Sheets M.Sc. : University of Windsor, Ontario, Canada (1969) Specialization : Civil Engineering, (Major : Structures) Courses : M.Sc. Thesis : Pre-stressed Concrete - Elastic Stability - Bending and Buckling of Plates - Statistics and Probability Structural Properties of Corrugated Sheets Used in Cylindrical Shells University Education B.Sc. : University, Cairo, EGYPT (1965) Specialization : Civil Engineering (Major - Structures) Order of Merit : Second Sholarships & Assistantships 1972 : Post-Doctoral Scholarship, University of Windsor : : Scholarships from the National Research Council of Canada + Teaching and Research Assistantship from the University of Windsor University Outstanding Awards 1960 : High School Outstanding Award Languages English : Fluent Arabic : Fluent French : Fair Computer Skills and Experience Teaching at the American University in Cairo for the Adult and Continuing Education Center (ACEC) many computer programming for Internet web-development such as HTML JavaScript 2

3 VBScript E-learning techniques Presentation Skills using all multimedia techniques. (Student Evaluation Always Excellent ). Developed and designed many web-sites for the Internet. These were published on a free server (Yahoo, Geocities), among of which is the "Faculty of Engineering University" official web-site and the official web-site of the Consultancy Center for the Faculty of Engineering. In addition I published many web-sites for the International Conferences held by the Faculty of Engineering at Ain Shams Former Chairman of the Education Technology Sector at Ain Shams University Development Center. Training Professors and Associate Professors Presentation skills using Multimedia in teaching as well as E-Learning techniques. Memberships of Syndicates, and Scientific Associations Member of the Association of Professional Engineers of the Province of Ontario in Canada (APEO). Member of the Egyptian Syndicate of Engineers. Member of the ACI in USA. Member of the Egyptian Society of Civil Engineers. Professional Consulting Engineer. Academic Experience December Now, Emeritus Professor: Working at Ain Shams University, Supervising the Graduation Projects for the Final year students - Supervising M.Sc. candidates Teaching Graduate Courses: Thin Walled Steel Structures (1), Thin Walled Steel Structures (2), Behavior of Steel Structures. October December 1998 : Professor and Vice-Dean of the Faculty of Engineering, February September 1996 : On Secondment from Ain Shams University, Chairman of Board National Housing and Building Research Center - Ministry of Housing, Utility, and Urban Communities. August January 1996 : Professor and Head of the Structural Engineering Department - Faculty of Engineering - Ain Shams University ; also, teaching: Design of steel structures and Bridges - Supervising the final year projects for graduating students - Supervising master degree candidates Teaching Graduate Courses for Computer Aided Design. September July 1994 : Professor, and Chairman of the Civil Engineering Department at the United Arab Emirates University in Al-Ain, Abu-Dhabi ; also teaching : Design of Reinforced Concrete 3

4 Constructions - Design of Steel Structures - Statics - Engineering Mechanics - Shell Structures - Advanced steel structures - and Advanced Structural Analysis and CAD. November August 1988 : Professor, Structural engineering department, faculty of engineering, Teaching : Steel structures - steel bridges - supervising the final year project for graduating students. Also teaching the following graduate courses for M.Sc. and Ph.D. candidates: Analysis design and construction of R. C. Shell Roofs - Theory of Elasticity - Advanced structural analysis. Also supervising master degree candidates. September October 1983 : Associate Professor, in the structural engineering department - Faculty of engineering - Ain Shams University ; teaching : steel structures - steel bridges construction - supervising the final year project of the graduating students - supervising M.Sc. Thesis candidates. October August 1982 : Associate professor, University of Petroleum & Minerals in Dhahran, Saudi Arabia. Teaching: strength of materials - Design of Reinforced Concrete structures - Design of steel structures - Statics - Jury member of the grading committee for the final year graduation projects of the Architectural engineering graduates - supervising M.Sc. thesis candidates. June September 1978 : Associate Professor, department of structural engineering, faculty of engineering - Teaching: steel design - reinforced concrete design - supervising graduation projects in R. C. and Steel structures & bridges for final year students - supervising M.Sc. Thesis. November May 1978 : Assistant professor, department of structural engineering - Teaching : structural steel design (III) - design of steel bridges - reinforced concrete design (III) - supervising final year project in steel bridges for graduating students - Also teaching the following graduate courses for diploma, M.Sc. & Ph.D. candidates : theory of elasticity (I) - analysis and design of R. C. shell structures. February October 1972 : Teaching Assistant at the University of Windsor, Ontario, Canada. Teaching and conducting research in the following fields: strength of materials - statics - experimental stress analysis - analysis and design of orthotropic shells, theoretically and experimentally. September January 1968 : Graduate student in the structural engineering department at Giving hand in teaching: Design of reinforced concrete structures (II) & (III) - descriptive geometry. Also conducting research in the 4

5 analysis and design of swing bridges. Practical Experience Consulting Engineer. Consultant of Stelco Co. in Cairo during the periods: from august 1973 to October 1978 and from march 1986 to june 1988 Consultant of the Egyptian sugar cane company during the years 1987 and Consultant of the housing and habitation bank during the period from 1995 to Previous Works 1- Design of crane girders, columns & foundations for a workshop in the military factory 999 in Helwan. 2- Design of the new sugar cane factory in Naga-Hammadi for the the Egyptian Sugar Cane company. 3- Design of a factory for the Egyptian company for spinning and weaving industries in El-Mahallah El-Kobra. It consists of three bay steel frames 20 ms. Span each. The total erected area of the project is 3660 m2. 4- Design a factory for Sigal company in Damanhour. It consists of two bay steel frames 16 ms. Span each. The total erected area of the project is 1125 m Design of a swing bridge over Ismailia canal after the destruction of the old one during the 10 th. Of Ramadan war. 6- Design of the students' dormitories (student residence) of Ain Shams 7- Design of welded trusses for the China & Ceramics factory (Sornaga). 8- Design of foundations for the equipment of weighing heavy loaded trucks for Stelco Co. 9- Design of a project for Sigwart Co. in Helwan fabricated and constructed by Stelco Co. 10- Design of two storage buildings for El-Koroum Co. in Alexandria. The first consists of steel frames 24 ms. Span with annex 6 ms. Wide. The total erected area of the first building is 1269 m2, while the second is m Design of semels & footings for steel frames of the Egyptian Cables Company. 12- Design of extension office building for Stelco Co. in Helwan. 5

6 13- Modifying the design of crane girders to accommodate extra loads used by the National Metallic industries Co. (Egytallic), executed by Stelco Co. 14- Design of the compound of Small Industries in the city of the tenth of Ramadan. The total weight of steel used in the construction is 705 tones. 15- Design of El-Gammal factory for paintings and chemical industries. 16- Design of a factory for Portland Cement Co. in Helwan. The total area of the project is 1680 m Design of a horizontal tank to accommodate 100 m3 of juce for El-Nasr Co. for canned food (Kaha), fabricated and erected by Stelco Co. 18- Design of 6 different pedestrian overhead bridges on El-Marg road. 19- Writing a technical report on the deterioration of El-Khazna Palace in Abu-Dhabi, requested by the special circle of His Excellency Sheik Zayed Ben Sultan Al-Nahyian, the President of the United Arab Emirates. 20- Design of a workshop for Mercedes Benz Automobile maintenance, requested by Sheik Abdul-Aziz Al-Rubian in Doha, Qatar. 21- Writing several technical reports on the deterioration of buildings owned by the Housing and Habitation Bank. 22- Writing a technical report on the feasibility of using epoxy coated re-bars for corrosion protection, requested by the United Foundation Co. 23- Member of the executive committee for preparing the National Project to solve the Housing problem in Egypt, requested by His Excellency the President of Egypt. 24- Member of the Ministerial Committee formed to estimate the losses of burning three 5-star hotels near the pyramids in Giza Governorate. 25- Member of the Ministerial Committee for the Egyptian Code of Practice for the design and construction of steel structures and 6

7 bridges. 26- Member of the Ministerial Committee for Updating the Code of Practice for Loads on Buildings and Bridges. International and Local Conferences Attended and Other Activities 1- Ninth Congress of the International Association for Bridge and Structural Engineering in Amsterdam, May First Specialty Conference on Light Weight Steel Structures - St. Louis, Missouri, U.S.A., October First Congress on Tall Buildings in Cairo, Nile-Hilton Hotel, Egypt, January Work-shop on Pre-Cast Concrete Structures, Al-Ahram News Paper building in Cairo, November Sabatical for 6 months doing research work at the University of Windsor, Ontario, Canada, (June January 1978). 6- First World Congress on New Coating Systems for Bridges and Steel Structures, New York City, U.S.A., November Member of the organizing committee for a 4-day seminar on cost efficient building systems held at University, (5-8 January 1985). 8- Supervision of many M.Sc. Thesis for graduate students at Ain Shams University as well as the University of Petroleum and Minerals in Dhahran, Saudi Arabia. 9- Chairman of a session in the second civil engineering conference sponsored by the technical military college held during 8-10 November Chairman of a session and presenting a paper in the ASCE congress - Egypt sector held during October Member of the organizing committee for the Seventh International Structural & Geotechnical Engineering Colloquium of University, December Chairman of the organizing committee for a seminar on Upgrading Policies of Randomly Built Regions, The Housing & Building Research Center, March

8 13- Head of the delegation of the Housing & Building Research Center Members attending the First International Conference on Composites held in the city of Sharm El-Sheikh, Presenting a paper in the Fourth International Conference on Roofing Technologies - Challenge of the 21 th. Century held in Gaithersburg, Maryland, U.S.A., during September Presenting a paper in the 9th. International Conference sponsored by the Development Teaching Center of "E-Learning as distance learning in academic teaching". Cairo December Presenting two papers in International Conference SITEX in Ryiadh, Kingdom of Saudi Arabia December Governmental and Universities Technical Committees Memberships. 1- Chairman of the Permanent Committee for Promoting Full Professors in Structural Engineering and construction - The Supreme Council of Universities in Egypt. (From till 4002). 2- Secretary and member of the Permanent Committee for Promoting Professors and Associate Professors in Structural Engineering and construction - The Supreme Council of Universities in Egypt. (From to 2001). 3- Chairman of Educational Technology Department at University Development Center. (From till 1998). 4- Member of the Ministerial Committee for the Egyptian Code of Practice for the Design and Construction of Steel Structures and Bridges. (Since till 2005). 5- Member of the Ministerial Committee for the Egyptian Code for Loads on Buildings and Bridges. (From till 2005). 6- Member of University Council for Education & Students' Affairs. (From September November 1998). 7- Chairman of the Education and Students' Affairs Committee - Faculty of Engineering, (From September November 1998). 8- Member of the Referees Board for publishing technical papers at 8

9 most Arab States Universities. 9- Member of a working team to establish productive communities for Youth in corporation with the Social Box. (From Feb September 1996). 10- Member of Urban Planning Committee at the Scientific Research Academy. (From February September 1996). 11- Member of the Organizing Committee in the Construction Council of the Scientific Research Academy. (From February September 1996). 12- Member of the National Committee of the Habitat (United Nations) Member of the Housing and Building Committee at the Specialized National Councils in Egypt. (From February September 1996). 14- Member of the National Consulting Committee for Earthquakes (1996). 15- Chairman of the Technical Consulting Committee for the Arab Ministers of Housing. (1996). 16- Member of the Executive Committee of the Arab Ministers of Housing Council. (1996). 17- Member of the Housing Committee of the Ministry of Housing, Utilities, and Urban communities. (From February September 1996). 18- Member of the Supreme Consulting Committee for Policy of the Ministry of Housing, Utilities and Urban Communities. (From February September 1996). 19- Member of the Leading Executives in the Ministry of Housing, Utilities and Urban Communities. (From February September 1996). 20- Member of the University Committee for Establishing the Examination Rules at UAE ( ). 21- Member of the Working Team formed to establish the Basics and Procedures of Student Counseling at UAE ( ). 22- Member of the University Committee for Curriculums and Study 9

10 Plans at UAE ( ). 23- Member of the Jury Committee for Architectural Projects Submitted by Graduating Students at UPM ( ). 24- Member of the Binational Fulbright Commission Committee for Fulbright Scholar Program - (The Commission for Educational & Cultural Exchange between the U.S.A. and Egypt). Publications. El-Karrany, A.H. & El-Atrouzy, M.N. "Reliability of the Ductile Steel Column Stability" Twelfth International Colloquium on Structural and Geotechnical Engineering (12 th ICSGE - University - Cairo, December, El-Atrouzy, M.N. "Precautions in Using Epoxy Coated Reinforcing Steel Bars in Construction" Fourth Saudi Technical International Conference and Exhibition - Ryiadh, 2-6 December, El-Atrouzy, M.N. "Web Based E-Training" Fourth Saudi Technical International Conference and Exhibition - Ryiadh, 2-6 December, El-Atrouzy, M.N. "E-Learning as distance learning" Ninth International Conference for University Education Development Center - University, December El-Atrouzy, M.N. "Teacher's training and preparation in the light of the modern revolution of (IT)" The Thirteen th. Scientific Conference - The Egyptian Society of Curriculum and Teaching Methods, July 2001.[ script in arabic language.] El-Atrouzy, M. N. " Technical Report Writing " Book, for 3rd. Year Students, Faculty of Engineering - January, El-Atrouzy, M. N., " Cylindrical Shell Roofs Made of Metal Corrugated Sheets", Fourth International Conference on Roofing Technology - Gaithersburg, Maryland, U. S. A., September El-Atrouzy, M. N., " Experimental Study on ACI-Code Provisions for Epoxy Coated Re-bars"., American Society of Civil Engineers, Egyptian Sector, October El-Atrouzy, M. N., El-Nawawi, O., and Abu-Zeid, A., " The feasibility of Using Fusion Bond Epoxy Coated Re-Bars for Corrosion Protection in R. C.", Interbuilt 94, June El-Atrouzy, M. N. & Radwan, G., " Feasibility of Using Epoxy Coated Re-Bars in R. C. Structures", The First Jordanian Conference in Chemical Engineering, Part (2), p. 39, held 11

11 during the period October Salem, A. H., El-Atrouzy, M. N., and El-Serwi, A., " Shear Diaphragms Connected by Epoxy", First Alexandria Structural & Geo-technical Engineering Conference, 1-3 December 1990, Part (2), pp. ( ). Salem, A. H., El-Atrouzy, M. N., and Abdel-Rehim, A. B., " Analysis of Cylindrical Water Tanks Stiffened by Vertical and Horizontal Stiffeners", University, Engineering Bulletin No. 25, April Salem, A. H., El-Atrouzy, M. N., and Hilmy, A., " Effect of Rectangular Openings on the Structural Behavior of Cylindrical Shell Roofs", University, Engineering Bulletin No. 25, April El-Atrouzy, M. N., " Nonlinear Buckling Analysis of Reticulated Domes", Proceedings of the Third Arab Conference in Structural Engineering. U.A. E., Vol.(1), 5-8 March El-Atrouzy, M. N., Saleh, A., and Issa, H. S., " The Use of Microcomputers in the Non-Linear Buckling Analysis of Reticulated Steel Domes", Journal of the Egyptian Society of Engineers, Conference on The Use of Microcomputers in Civil Engineering, December 6 th. - 9 th., El-Atrouzy, M. N., " Simplifications and Their Effect on The Solution of Orthotropic Cylindrical Shells", University, Engineering Bulletin No. 17, El-Atrouzy, M. N., and El-Korashy, M. A., " Prefabricated Steel Components Used in Housing", Egyptian Society of Engineers, The Institution of Civil Engineers, Cairo, January El-Atrouzy, M. N., " Analysis and Design of Steel Structures", Book, University Publications, Abu-Salha, N., Brown, T., Azad, A. D., and El-Atrouzy, M. N., " Multiple Column/Brace System Experiments", Proceedings of the Institute of Civil Engineers, U.K., Part 2, December, El-Atrouzy, M. N., " Experiments on Brace Forces in Inter-braced Column Systems", University, Engineering Bulletin No. 14, El-Atrouzy, M. N., " Simplified Model for Design of Orthotropic Cylindrical Water Tanks", University, Engineering Bulletin No. 13, El-Atrouzy, M. N., " Ultimate Strength of Eccentric Welded Connections Subjected to Shear and Moment", Civil Engineering for Practicing and Design Engineers, Vol. (1), pp , Pergamon Press Ltd., U.S.A El-Atrouzy, M. N. and Juruf, R. S., " Design Aids for Slabs Having Beamless Cantilever Balconies", Journal of Civil Engineering Design, U.S.A.,

12 El-Atrouzy, M. N., " A Direct Non-Linear Analysis of an Elastic Arch", Journal of the Institute of Civil Engineers, The Structural Engineer, Part B. Volume 58 B, Number 4, United Kingdom, December El-Atrouzy, M. N. and Abdel-Sayed, G. " Pre-buckling Analysis of Orthotropic Barrel Shells", American Society of Civil Engineers (ASCE), Structural Division, ST. 11, November Hassan, K., El-Atrouzy, M. N. & Dessouki, A. R., " Analysis of Orthotropic Plates Having Different Boundary Conditions", University, Engineering Bulletin No. 8, April El-Atrouzy, M. N. " Accuracy of Characteristic Equations of Orthotropic Shells", Journal of the Egyptian Society of Civil Engineers. El-Atrouzy, M. N. " Study of Load Distribution on Floor Beams of Swing Bridges at the Central Pier", Journal of the Egyptian Society of Civil Engineers. El-Atrouzy, M. N. & Abdel-Sayed, G., " Shell Roofs and Grain Bins Made of Corrugated Sheets", Specialty Conference on Light Weight Steel Structures, St. Louis, Missouri, U.S.A., October Abdel-Sayed, G. & El-Atrouzy, M. N.," Cylindrical Shells Made of Corrugated Sheets", International Association for Bridge and Structural Engineering. Ninth Congress, Amsterdam, May El-Atrouzy, M. N., " Cylindrical Shell Roofs Made of Corrugated Sheets", Ph.D. Dissertation, University of Windsor, Ontario, Canada, El-Atrouzy, M. N., " Structural Properties of Corrugated Sheets Used in Cylindrical Shells", M.Sc. Thesis, University of Windsor, Ontario, Canada, The following are the M.Sc./Ph.D. dissertations supervized and/or approved together with the candidate's name and University offering the degree. Name of Candidate Nidal Abu Salha Khalid Mohamed Youssef Title of M.Sc./Ph.D. " Experiments on Brace Forces in Inter-braced Column Systems ", (M.Sc.). " Evaluation for Some Aspects of Egyptian Standard Specifications for Metallic Structures and Bridges and the Studies Required for the Suggested Alterations ", (M.Sc.). University University of Petroluem & Minerals. KSA 12

13 Hesham Saeid El-Sayed Ahmed Essa Sherif Ahmed Mourad Amr Ibrahim Ibrahim Helmy Abdel Rehim Badawy Ahmed Abdel Salam Ismail El- Serwi Ahmed Abdel Salam Ismail El- Serwi Hamdy Mohamed Showat Kamal Mohamed Abu-Al-Hasab Sherif Abdel- Basset Ibrahim Mohamed Sabry Mohammed Mohammed Shtifa Maged Tawfick Hanna Youssef Manal Kamel Zaki Mohsin Fathy Ahmed Shuaib Essam Abd Elaty Mohamed Amoush " Buckling of Reticulated Space Structures ", (M.Sc.). " Stability of Steel Frames with Semirigid Connections ", (M.Sc.). " The Effect of Rectangular Openings on the Structural Behavioue of Cylindrical Shell Roofs ", (M.Sc.). " Experimental and Theoretical Analysis of Orthotropic Water Tanks ", (M.Sc.). " Corrugated Sheet Shear Diaphragm Connected by Epoxy ", (M.Sc.). " Elasto-Plastic Analysis of Thin- Walled Beam-Colomns ", (Ph.D.). " Dynamic Stability of Steel Frames ", (Ph.D.). " Elastic-Plastic Stability Analysis and Design of Steel Frameworks ", (M.Sc.). " Elasto-Plastic Interaction Buckling of Cold-Formed Sections ", (M.Sc.). " Experimental and Theoretical Study of the Composite Rolled and Corresponding Castellated Steel Beams Under Torsion ", (M.Sc.). " Effect of variation of Loads Ratios on Columns on the Elastic Buckling Strength of Frameworks ", (M.Sc.). " Design of Composite Beam- Columns Under Biaxial Bending ", (Ph.D.). " Optimum Design of Large Skeletal Structures", (Ph.D.). " Moment-Rotation for Base Connections With Different Detail Configurations ", (M.Sc.). Cairo Military Technical College. El-Mansourah Cairo Tanta 13

14 Moataz Mohamed Fadl Ahmed Mouatafa Tawfeek Ahmed Mohamed Nageeb El- Karany " Design of Submarine Pipelines Against Upheaval Buckling ", (M.Sc.). " Reliability of Offshore Structures", (M.Sc.). " Reliability Analysis of Framed Steel Structures as an Approach to Codified Design", (Ph.D.). 14