BUILDING PERMIT APPLICATION. Commercial Building Permit Application Checklist

Transcription

1 BUILDING PERMIT APPLICATION Buddy Riley Blvd. Magnolia, Texas Phone: Fax: cityofmagnolia.com Commercial Building Permit Application Checklist All projects must comply with the City of Magnolia land use and zoning standards in the Unified Development Code. Construction plans must be designed in accordance with the City of Magnolia adopted codes. Two (2) paper copies, one (1).pdf digital copy of the plans, and all supporting documents must accompany the application. If new water and/or sewer taps are required, please include on the application where noted. Plan review and permit fees are based on fee calculations in the 2015 version of the International Building Code, as adopted by City Council. The plan review fee is one-half (½) of the permit fee and is required at the time of submittal. If there is a remaining Escrow Balance on the project, it will be applied when the permit is paid. The applicant will receive the City s written comments and notification of any additional requirements within ten (10) business days. CHECKLIST: Is the property legally platted or subdivided? A permit may not be issued if the parcel where the building permit is required is part of another lot or tract of record. Project name Site address Site legal description Name, address, phone number of applicant Name, address, phone number of owner/developer (if different from applicant) Name, address, phone number of architect/engineer (if different from applicant) Date of submittal North arrow Current zoning Engineering scale set to the largest scale possible for the sheet Legend for abbreviations and symbols used Official stamp seals of licensed engineers and/or architects with license numbers BUILDING SPECIFICS: Asbestos survey (Required on all additions to, or alterations of, existing commercial buildings) Depict the outline of the subject property using a thick black line Civil drawings (Site plan as approved including utility plan, grading and drainage, SWPPP, etc.) Occupant load calculation determined by the 2015 version of the International Building Code Floor plan showing all existing and proposed construction with wall details Finish floor elevations shown Floor plan showing the location and type of fire extinguishers Plumbing plans with details and specifications Electrical plans with details and specifications including emergency lighting

2 18111 Buddy Riley Blvd. Magnolia, Texas Phone: BUILDING PERMIT APPLICATION Fax: cityofmagnolia.com Job Address: Subdivision: Permit Number: (City only) Legal Description: Lot No.: Block: Tract: Owner: Mailing Address: Phone: Engineer: Mailing Address: Phone: Contractor: Mailing Address: Phone: Architect or Designer: Mailing Address: Phone: Use of Building: Flood Zone: Residential Commercial Yes No Class of Work: New Addition Repair Alteration Demolish Sign Other Describe Construction Work: City Comments: (City only) Applicant needs to complete the following spaces. State NA to those sections that do not apply to the structure or work to be performed. NOTICE Separate permits are required for electrical, plumbing, heating, ventilation or air conditioning. This permit becomes null and void if work or construction authorized is not commenced within six (6) months, or if construction or work is abandoned for a period of six (6) months at any time after work is commenced. All provisions of laws and ordinances governing this type of work will be complied with whether specified herein or not. The granting of a permit does not presume to give authority to violate or cancel the provisions of any other state or local law relating to construction, nor does it give authorization or approval to encroach on any easement or property or violate any deed restrictions. The City of Magnolia shall never be liable for any damage or loss by reason of the issuance hereof. Each holder and other persons acting under authority of this permit are personally responsible for compliance with all the above provisions and assume the entire risks incidental to the work being permitted. Total Project Valuation: $ Type of Construction: Total Paving: Fire Sprinkler Total Building Area: (SF) Occupant Load: I hereby certify that I have read and examined this application and know the same to be true and correct. Permit Fee: (City only) $ Signature of Contractor or Authorized Agent: Date: Total: (City only) $ Zoning District: Parking Required: No. of Buildings/No of Stories: Lot Size: Office Use Only Plan Check Fee: (City only) $ Signature of Building Official: (City only) Date: Taps Required: Yes No Signature of City Engineer: (If required) (City only) Date: Tap Fees: (If Applicable) $ Please Note: There shall be no refund of fees. Occupancy Class:

3 BUILDING PERMIT APPLICATION Utility Descriptions; Please List All Proposed Utilities Water Sewer Other (Irrigation, Fire) Distance from meter to structure Ft. Ft. Ft. Meter or line size to be used In. In. In. Size of meter Utility tap fee $ $ $ Impact fee $ $ $ Please Allow 7-14 Business Days for Building Plan Review Address: CONTRACTOR REGISTRATION Are you currently registered with the City of Magnolia? Yes No Please submit Certificate of Insurance (If new register) Please provide all applicable licenses for copying (Cont., Master Ele. Etc.) **Office Use Only Check for registration date of existing contractors. DOUBLE FEES: All permit, inspection and plan review fees shall apply, except that if any person shall make an application for a permit as provided in this division, after the work has been started or after the work has been partially completed pr concealed, such person shall pay double the fee or fees which would ordinarily be required. RE-INSPECTION: There will be a $35.00 re-inspection fee on failed inspections and work called in for inspection before it is ready. Building Permit Fee Fees are in accordance with currently adopted IBC and ICC Building Valuation Data. (See attached) Plan Review Fee $0.00 to $1, Fee: $35.00 $1, and up Fee: ½ cost of Building Permit Fee Make checks payable to City of Magnolia THANK YOU FOR YOUR BUSINESS! Office Use Only Building Permit Fee: Gross Area: Sq. ft. Construction Cost: Permit Fee Multiplier: Gross Area X Square Foot Construction Cost X Permit Fee Multiplier = $ Plan Review Fee: $ $1, No fee -0- $1, and up ½ Building Permit fee (see above table) $ Revised

4 Building Valuation Data AUGUST 2017 The International Code Council is pleased to provide the following Building Valuation Data (BVD) for its members. The BVD will be updated at six-month intervals, with the next update in February ICC strongly recommends that all jurisdictions and other interested parties actively evaluate and assess the impact of this BVD table before utilizing it in their current code enforcement related activities. The BVD table provides the average construction costs per square foot, which can be used in determining permit fees for a jurisdiction. Permit fee schedules are addressed in Section of the 2015 International Building Code (IBC) whereas Section addresses building permit valuations. The permit fees can be established by using the BVD table and a Permit Fee Multiplier, which is based on the total construction value within the jurisdiction for the past year. The Square Foot Construction Cost table presents factors that reflect relative value of one construction classification/occupancy group to another so that more expensive construction is assessed greater permit fees than less expensive construction. ICC has developed this data to aid jurisdictions in determining permit fees. It is important to note that while this BVD table does determine an estimated value of a building (i.e., Gross Area x Square Foot Construction Cost), this data is only intended to assist jurisdictions in determining their permit fees. This data table is not intended to be used as an estimating guide because the data only reflects average costs and is not representative of specific construction. This degree of precision is sufficient for the intended purpose, which is to help establish permit fees so as to fund code compliance activities. This BVD table provides jurisdictions with a simplified way to determine the estimated value of a building that does not rely on the permit applicant to determine the cost of construction. Therefore, the bidding process for a particular job and other associated factors do not affect the value of a building for determining the permit fee. Whether a specific project is bid at a cost above or below the computed value of construction does not affect the permit fee because the cost of related code enforcement activities is not directly affected by the bid process and results. Building Valuation The following building valuation data represents average valuations for most buildings. In conjunction with IBC Section 109.3, this data is offered as an aid for the building official to determine if the permit valuation is underestimated. Again it should be noted that, when using this data, these are average costs based on typical construction methods for each occupancy group and type of construction. The average costs include foundation work, structural and nonstructural building components, electrical, plumbing, mechanical and interior finish material. The data is a national average and does not take into account any regional cost differences. As such, the use of Regional Cost Modifiers is subject to the authority having jurisdiction. Permit Fee Multiplier Determine the Permit Fee Multiplier: 1. Based on historical records, determine the total annual construction value which has occurred within the jurisdiction for the past year. 2. Determine the percentage (%) of the building department budget expected to be provided by building permit revenue. 3. Bldg. Dept. Budget x (%) Permit Fee Multiplier = Total Annual Construction Value Example The building department operates on a $300,000 budget, and it expects to cover 75 percent of that from building permit fees. The total annual construction value which occurred within the jurisdiction in the previous year is $30,000,000. Permit Fee Multiplier = $300,000 x 75% = $30,000,000 Permit Fee The permit fee is determined using the building gross area, the Square Foot Construction Cost and the Permit Fee Multiplier. Permit Fee = Gross Area x Square Foot Construction Cost X Permit Fee Multiplier Example Type of Construction: IIB Area: 1st story = 8,000 sq. ft. 2nd story = 8,000 sq. ft. Height: 2 stories Permit Fee Multiplier = Use Group: B 1. Gross area: Business = 2 stories x 8,000 sq. ft. = 16,000 sq. ft. 2. Square Foot Construction Cost: B/IIB = $165.19/sq. ft. 3. Permit Fee: Business = 16,000 sq. ft. x $165.19/sq. ft x = $19,823

5 Important Points The BVD is not intended to apply to alterations or repairs to existing buildings. Because the scope of alterations or repairs to an existing building varies so greatly, the Square Foot Construction Costs table does not reflect accurate values for that purpose. However, the Square Foot Construction Costs table can be used to determine the cost of an addition that is basically a stand-alone building which happens to be attached to an existing building. In the case of such additions, the only alterations to the existing building would involve the attachment of the addition to the existing building and the openings between the addition and the existing building. For purposes of establishing the Permit Fee Multiplier, the estimated total annual construction value for a given time period (1 year) is the sum of each building s value (Gross Area x Square Foot Construction Cost) for that time period (e.g., 1 year). The Square Foot Construction Cost does not include the price of the land on which the building is built. The Square Foot Construction Cost takes into account everything from foundation work to the roof structure and coverings but does not include the price of the land. The cost of the land does not affect the cost of related code enforcement activities and is not included in the Square Foot Construction Cost. Square Foot Construction Costs a, b, c Group (2015 International Building Code) IA IB IIA IIB IIIA IIIB IV VA VB A-1 Assembly, theaters, with stage A-1 Assembly, theaters, without stage A-2 Assembly, nightclubs A-2 Assembly, restaurants, bars, banquet halls A-3 Assembly, churches A-3 Assembly, general, community halls, libraries, museums A-4 Assembly, arenas B Business E Educational F-1 Factory and industrial, moderate hazard F-2 Factory and industrial, low hazard H-1 High Hazard, explosives N.P. H234 High Hazard H-5 HPM I-1 Institutional, supervised environment I-2 Institutional, hospitals N.P N.P. I-2 Institutional, nursing homes N.P N.P. I-3 Institutional, restrained I-4 Institutional, day care facilities M Mercantile R-1 Residential, hotels R-2 Residential, multiple family R-3 Residential, one- and two-family d R-4 Residential, care/assisted living facilities S-1 Storage, moderate hazard S-2 Storage, low hazard U Utility, miscellaneous a. Private Garages use Utility, miscellaneous b. For shell only buildings deduct 20 percent c. N.P. = not permitted d. Unfinished basements (Group R-3) = $21.00 per sq. ft.