Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja (M13)

Transcription

1 Istaknuta monografija međunarodnog značaja (M11) 1. Kozić, P., Stojanović, V.: VIBRATIONS AND STABILITY OF COMPLEX BEAM SYSTEMS, Springer, DOI: / , pp.1-182, Monografija međunarodnog značaja (M12) Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja (M13) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja (M14) 1. Madić, M., Radovanović, M., Slatineanu, L., Dodun, O., OPTIMIZATION OF LASER CUT QUALITY CHARACTERISTICS CONSIDERING MATERIAL REMOVAL RATE BASED ON PARETO CONCEPT, in: Applied Mechanics and Materials, vol. 657, pp Trans Tech Publications, ISSN , Madić, M., Janković, P., Radovanović, M., Slatineanu, L., ARTIFICIAL INTELLIGENCE MODEL FOR THE PREDICTION OF CUT QUALITY IN ABRASIVE WATER JET CUTTING, in: Applied Mechanics and Materials, vol. 659, pp Trans Tech Publications, ISSN , Ristić-Durrant D., Slavnić S., Glackin C. (2014). CORBYS project overview: approach and achieved results, W. Jensen et al. (eds), REPLACE, REPAIR, RESTORE, RELIEVE BRIDGING CLINICAL AND ENGINEERING SOLUTIONS IN NEUROREHABILITATION, Biosystems & Biorobotics, Volume 7, 2014, pp Slatineanu, L., Coteata, M., Besliu, I., Dodun, O., Radovanović, M., SURFACE GENERATION BY MATERIAL REMOVAL IN MANUFACTURING PROCESSES FROM MACHINE BUILDING, in: Applied Mechanics and Materials, vol. 657, pp Trans Tech Publications, ISSN , Tasić M., Stamenković D., METONIMIJA: OD MARGINALIZOVANOG TROPA DO CENTRALNOG POJMOVNOG MEHANIZMA, Jezik, književnost, marginalizacija: Jezička istraživanja, 2014, Filozofski fakultet u Nišu, , str Leksikografska jedinica ili karta u naučnoj publikaciji vodećeg međunarodnog značaja (M15) 6

2 Leksikografska jedinica ili karta u publikaciji međunarodnog značaja (M16) Uređivanje naučne monografije ili tematskog zbornika vodećeg međunarodnog značaja (M17) Uređivanje naučne monografije, tematskog zbornika, leksikografske ili kartografske publikacije međunarodnog značaja (M18) 1. Đorđević, D. B., ed. ON RELIGION IN THE BALKANS, Yugoslav Society for the Scientific Study of Religion, Ivan Hadjyiski, Niš, Sofia, 2013, ISBN (YSSSR), ISBN ( Ivan Hadjyiski ). 7

3 Rad u vrhunskom međunarodnom časopisu (M21) 1. Anđelković A., Gvozdenac-Urošević B., Kljajić M., Ignjatović M., EXPERIMENTAL RESEARCH OF THE THERMAL CHARACTERISTICS OF A MULTI-STOREY NATURALLY VENTILATED DOUBLE SKIN FACADE, Energy and Buildings, Elsevier, 86, , 2014, pp , DOI:1o.1016/j.enbuild Basser H., Shamshirband S., Karami H., Petković D., Akib S., Jahangirzadeh A., ADAPTIVE NEURO-FUZZY SELECTION OF THE OPTIMAL PARAMETERS OF PROTECTIVE SPUR DIKE, Natural Hazards, Volume 73, Issue 3, September 2014, pp , DOI: /s Basser H., Shamshirband S., Petković D., Karami H., Akib S., Jahangirzadeh A., ADAPTIVE NEURO-FUZZY PREDICTION OF THE OPTIMUM PARAMETERS OF PROTECTIVE SPUR DIKE, Natural Hazards, Volume 73, Issue 3, September 2014, pp , DOI: /s Che N. S. M., Shamshirband S., Petković D., Penny R., Zakaria R., ADAPTIVE NEURO-FUZZY APPRAISAL OF PLASMONIC STUDIES ON MORPHOLOGY OF DEPOSITED SILVER THIN FILMS HAVING DIFFERENT THICKNESSES, Plasmonics, Volume 9, Issue 5, October 2014, pp , DOI: /s Karličić D., Kozić P., Pavlović R., FREE TRANSVERSE VIBRATION OF NONLOCAL VISCOELASTIC ORTHOTROPIC MULTI-NANOPLATE SYSTEM (MNPS) EMBEDDED IN A VISCOELASTIC MEDIUM, Composite Structures, 2014, Elsevier, pp , DOI: 6. Karličić D., Kozić P., Murmu T., Cajić M., Adhikari S., DYNAMICS OF MULTIPLE VISCOELASTIC CARBON NANOTUBE BASED NANOCOMPOSITES WITH AXIAL MAGNETIC FIELD, Journal of Applied Physics, 2014, American Institute of Physics, pp , DOI: / Karličić D., Adhikari S., Murmu T., Cajić M., EXACT CLOSED-FORM SOLUTION FOR NON- LOCAL VIBRATION AND BIAXIAL BUCKLING OF BONDED MULTI-NANOPLATE SYSTEM, Composites Part B: Engineering, 2014, Pergamon, pp , DOI: 8. Kovačević, M., Madić, M., Radovanović, M., Rančić, D., SOFTWARE PROTOTYPE FOR SOLVING MULTI-OBJECTIVE MACHINING OPTIMIZATION PROBLEMS: APPLICATION IN NON-CONVENTIONAL MACHINING PROCESSES, Expert Systems with Applications, Vol. 41, No. 13, pp , Kozić P., Stojanović V., Ristić M., VIBRATIONS AND STABILITY ANALYSIS OF MULTIPLE RECTANGULAR PLATES COUPLED WITH ELASTIC LAYERS BASED ON DIFFERENT PLATE THEORIES, International Journal of Mechanical Sciences, 2014, Pergamon, pp. 1-45, UDC: (14) , DOI:://dx.doi.org/ /j.ijmecsci Lukić M., Ćojbašić Ž., Rabasović M., Markušev D., COMPUTATIONALLY INTELLIGENT PULSED PHOTOACOUSTICS, Measurement Science and Technology, Volume 25, Issue 12, December 2014, DOI: / /25/12/ Milutinović,B., Stefanović,G., Dassisti,M., Marković,D., Vučković,G., MULTI-CRITERIA ANALYSIS AS A TOOL FOR SUSTAINABILITY ASSESSMENT OF A WASTE MANAGEMENT MODEL, Energy, 2014, vol. 74, pp Moghri, M., Madić, M., Omidi, M., Farahnakian, M., SURFACE ROUGHNESS OPTIMIZATION OF POLYAMIDE-6/NANOCLAY NANOCOMPOSITES USING ARTIFICIAL NEURAL NETWORK: GENETIC ALGORITHM APPROACH, The Scientific World Journal, 2014, 8

4 13. Nikolić V., Shamshirband S., Petković D., Mohammadi K., Ćojbašić Ž, Altameem T. A., Gani A., WIND WAKE INFLUENCE ESTIMATION ON ENERGY PRODUCTION OF WIND FARM BY ADAPTIVE NEURO-FUZZY METHODOLOGY, Energy, Volume 80, November 2014, pp , DOI: /j.energy Petković D., Ab Hamid S. H., Ćojbašić Ž., Pavlović N. T., ADAPTING PROJECT MANAGEMENT METHOD AND ANFIS STRATEGY FOR VARIABLES SELECTION AND ANALYZING WIND TURBINE WAKE EFFECT, Natural Hazards, Volume 74, Issue 2, November 2014, pp , DOI: /s Petković D., Shamshirband S., Saboohi H., Anuar N. B., Abdul W. A. W., Protić M., Zalnezhad E., Amin M. S. M., AN APPRAISAL OF WIND SPEED DISTRIBUTION PREDICTION BY SOFT COMPUTING METHODOLOGIES: A COMPARATIVE STUDY, Energy Conversion and Management, Volume 84, August 2014, pp , DOI: /j.enconman Petković D., Shamshirband S., Ćojbašić Ž., Nikolić V., Anuar N. B., Md Sabri A. Q., Akib S., ADAPTIVE NEURO-FUZZY ESTIMATION OF BUILDING AUGMENTATION OF WIND TURBINE POWER, Computers & Fluids, Volume 97, 25 June 2014, pp , DOI: /j.compfluid Petković D., Shamshirband S., Anuar N. B., Naji S., Mat K. M. L., Gani A., ADAPTIVE NEURO- FUZZY EVALUATION OF WIND FARM POWER PRODUCTION AS FUNCTION OF WIND SPEED AND DIRECTION, Stoch Environ Res Risk Assess, Volume xx, xxxx 2014, pp. xxx xxx, DOI: /s Petković D., Shamshirband S., Iqbal J., Anuar N. B., Pavlović N. D., Mat K. M. L., ADAPTIVE NEURO-FUZZY PREDICTION OF GRASPING OBJECT WEIGHT FOR PASSIVELY COMPLIANT GRIPPER, Applied Soft Computing, Volume 22, Septembver 2014, pp , DOI: /j.asoc Petković D., Shamshirband S., Pavlović N. D., Saboohi H., Altameem A. T., Gani A., DETERMINING THE JOINTS MOST STRAINED IN AN UNDERACTUATED ROBOTIC FINGER BY ADAPTIVE NEURO-FUZZY METHODOLOGY, Advances in Engineering Software, Volume 77, November 2014, pp , DOI: /j.advengsoft Petković D., Shamshirband S., Saboohi H., Ang T. F., Anuar N. B., Pavlović N. D., SUPPORT VECTOR REGRESSION METHODOLOGY FOR PREDICTION OF INPUT DISPLACEMENT OF ADAPTIVE COMPLIANT ROBOTIC GRIPPER, Applied Intelligence, Volume 41, October 2014, pp , DOI: /s Petković, M.S., Petković, L.D., Džunić, J., ON AN EFFICIENT SIMULTANEOUS METHOD FOR FINDING POLYNOMIAL ZEROS, Applied Mathematical Letters, 28 (2014), Petković, M.S., Neta, B., Petković, L.D., Džunić, J., MULTIPOINT METHODS FOR SOLVING NONLINEAR EQUATIONS: A SURVEY, Appl. Math. Comput. 226 (2014), Rakić D. S., Dinčić N. Č., Djordjević D. S., CORE INVERSE AND CORE PARTIAL ORDER OF HILBERT SPACE OPERATORS, Appl. Math. Comput., Vol. 244, October 2014, pp , DOI: /j.amc Shamshirband S., Petković D., Ćojbašić Ž., Nikolić V., Anuar N. B., Mohd S. N. L., Mat K. M. L., Akib S., ADAPTIVE NEURO-FUZZY OPTIMIZATION OF WIND FARM PROJECT NET PROFIT, Energy Conversion and Management, Volume 80, April 2014, pp , DOI: /j.enconman Shamshirband S., Petković D., Amini A., Anuar N. B., Nikolić V., Ćojbašić Ž., Anuar N. B., Mat K. M. L., Gani A., SUPPORT VECTOR REGRESSION METHODOLOGY FOR WIND TURBINE REACTION TORQUE PREDICTION WITH POWER-SPLIT HYDROSTATIC CONTINUOUS VARIABLE TRANSMISSION, Energy, Volume 67, April 2014, pp , DOI: /j.energy

5 26. Shamshirband S., Petković D., Saboohi H., Anuar N. B., Inayat I., Akib S., Ćojbašić Ž., Nikolić V., Mat K. M. L., Gani A., WIND TURBINE POWER COEFFICIENT ESTIMATION BY SOFT COMPUTING METHODOLOGIES: COMPARATIVE STUDY, Energy Conversion and Management, Volume 81, April 2014, pp , DOI: /j.enconman Shamshirband S., Hessam S., Javidnia H., Amiribesheli M., Vahdat S., Petković D., Gani A., Mat K. M. L., TUBERCULOSIS DISEASE DIAGNOSIS USING ARTIFICIAL IMMUNE RECOGNITION SYSTEM, International Journal of Medical Sciences, Volume 11, Issue 4, May 2014, pp , DOI: /ijms Shamshirband S., Anuar N. B., Mat K. M. L., Petković D., Misra S., Rohani V. A., Khan A. N., CO- FAIS: COOPERATIVE FUZZY ARTIFICIAL IMMUNE SYSTEM FOR DETECTING INTRUSION IN WIRELESS SENSOR NETWORKS, Journal of Network and Computer Applications, Volume 42, June 2014, pp , DOI: /j.jnca Shamshirband S., Petković D., Anuar N. B., Gani A., ADAPTIVE NEURO-FUZZY GENERALIZATION OF WIND TURBINE WAKE ADDED TURBULENCE MODELS, Renewable and Sustainable Energy Reviews, Volume 36, August 2014, pp , DOI: /j.rser Shamshirband S., Petković D., Hashim R., Motamedi S., Anuar N. B., AN APPRAISAL OF WIND TURBINE WAKE MODELS BY ADAPTIVE NEURO-FUZZY METHODOLOGY, Electrical Power and Energy Systems, Volume 63, December 2014, pp , DOI: /j.ijepes Shamshirband S., Iqbal J., Petković D., Mirhashemi M. A., SURVEY OF FOUR MODELS OF PROBABILITY DENSITY FUNCTIONS OF WIND SPEED AND DIRECTIONS BY ADAPTIVE NEURO-FUZZY METHODOLOGY, Advances in Engineering Software, Volume 76, October 2014, pp , DOI: /j.advengsoft Shamshirband S., Petković D., Hashim R., Motamedi S.: ADAPTIVE NEURO-FUZZY METHODOLOGY FOR NOISE ASSESSMENT OF WIND TURBINE, PLoS ONE,, Volume 9, Issue 7, e103414, July 2014, pp. xxx xxx DOI: /journal.pone Petković, D., Ćojbašić, Ž., Nikolić, V., Shamshirband, S., Mat, K.M.L., Anuar, N.B., Abdul,W. A. W., ADAPTIVE NEURO-FUZZY MAXIMAL POWER EXTRACTION OF WIND TURBINE WITH CONTINUOUSLY VARIABLE TRANSMISSION, Energy, doi: /j.energy , ISSN: , Volume 64, January 2014, pp Shamshirband S., Petković D., Javidnia H., Gani A., SENSOR DATA FUSION BY SUPPORT VECTOR REGRESSION METHODOLOGY A COMPARATIVE STUDY, IEEE Sensors Journal, Volume 15, Issue 2, November 2014, pp , DOI: /JSEN Shamshirband S., Gocić M., Petković D., Saboohi H., Herawan T., Mat K. M. L., Akib S., SOFT- COMPUTING METHODOLOGIES FOR PRECIPITATION ESTIMATION: A CASE STUDY, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, Volume PP, Issue 99, October 2014, pp. xxx-xxx, DOI: /JSTARS Vučković G., Stojiljković M., Vukić M., Stefanović G., Dedejić E., ADVANCED EXERGY ANALYSIS AND EXERGOECONOMIC PERFORMANCE EVALUATION OF THERMAL PROCESSES IN AN EXISTING INDUSTRIAL PLANT, Energy conversion and management 2014, Elsevier, 85, , pp. 655,-662, DOI: /j.enconman Zakaria R., Sheng O. Y., Wern K., Shamshirband S., Petković D., Pavlović N. T., ADAPTIVE NEURO-FUZZY EVALUATION OF THE TAPERED PLASTIC MULTIMODE FIBER BASED SENSOR PERFORMANCE WITH AND WITHOUT SILVER THIN FILM FOR DIFFERENT CONCENTRATIONS OF CALCIUM HYPOCHLORITE, IEEE Sensors Journal, Volume 14, Issue 10, August 2014, pp , DOI: /JSEN

6 38. Zdravković M., Trajanović M., Panetto H., Aubry A., EXPLICATION AND SEMANTIC QUERYING OF ENTERPRISE INFORMATION SYSTEMS, Knowledge and Information Systems (2014), 3, 40, ISSN: (print version) ISSN: (electronic version), pp Rad u istaknutom međunarodnom časopisu (M22) 1. Akib S., Rahman S., Shamshirband S., Petković D., SOFT COMPUTING METHODOLOGIES FOR ESTIMATION OF BRIDGE GIRDER FORCES WITH PERFORATIONS UNDER TSUNAMI WAVE LOADING, Bulletin of Earthquake Engineering, Volume 13, Issue 3, 2014, pp , DOI:0.1007/s Bogdanović B., Bogdanović-Jovanović J., Milenković D., Spasić Ž., Svrakota D., PUMPS USED AS TURBINES - POWER RECOVERY, ENERGY EFFICIENCY, CFD ANALYSIS, Thermal Science, 3, 8, 2014, Laboratory for Thermal Engineering and Energy, Vinca Institute of Nuclear Sciences, pp , ISSN (online edition), ISSN (printed edition), UDC: Ćirić I., Ćojbašić Ž., Nikolić V., Igić T., Turnšek B., INTELLIGENT OPTIMAL CONTROL OF THERMAL VISION - BASED PERSON-FOLLOWING ROBOT PLATFORM, Thermal Science, Volume 18, Issue 3, 2014, pp , DOI: /TSCI C. 4. Hedrih (Stevanović) K., Simonović J., STRUCTURAL ANALOGIES ON SYSTEMS OF DEFORMABLE BODIES COUPLED WITH NON-LINEAR LAYERS, Int. J. Non-Linear Mech, on-line version, 5. Jovanović M., Nikodijević J., Nikodijević M., RAYLEIGH-BÉNARD CONVECTION INSTABILITY IN THE PRESENCE OF SPATIAL TEMPERATURE MODULATION ON BOTH PLATES, International Journal of Non-Linear Mechanics, 11, , 2014, Elsevier, pp. 1-12, DOI:io.ioi6/J.IJNONLINMEC Kocić M., Nikodijević D., Nikodijević J., Stamenković Ž., FLOW AND HEAT TRANSFER OF THREE IMMISCIBLE FLUIDS IN THE PRESENCE OF UNIFORM MAGNETIC FIELD, Thermal Science, 18, 3, 2014, , Society of Thermal Engineers of Serbia, Vinca Institute of Nuclear Sciences, Belgrade, pp , DOI: /TSCI N. 7. Kozić P., Karličić D., Pavlović R., THE FLEXURAL VIBRATION AND BUCKLING OF THE ELASTICALLY CONNECTED PARALLEL-BEAMS WITH A KERR-TYPE LAYER IN BETWEEN, Mechanics Research Communications, (2014), Pergamon, pp.83-89, DOI: 8. Mančić,M., Živković,D., Milosavlјević, P., Todorović, M., MATHEMATICAL MODELLING AND SIMULATION OF THE THERMAL PERFORMANCE OF A SOLAR HEATED INDOOR SWIMMING POOL, Thermal Science 3 (2014) 18, pp , DOI: /TSCI M. 9. Mijajlović M., Milcic D., Milcic M., NUMERICAL SIMULATION OF FRICTION STIR WELDING, Thermal Science 3 (2014) 18, , pp Nikolić, R., Radovanović, M., Živković, M., Nikolić, A., Rakić, D., Blagojević, M., MODELING OF THERMOELECTRIC MODULE OPERATION IN INHOMOGENEOUS TRANSIENT TEMPERATURE FIELD USING FINITE ELEMENT METHOD, Thermal Science, Vol. 18, No. 1, pp ,

7 11. Pavlović S., Stefanović V., Suljković S., OPTICAL MODELING OF A SOLAR DISH THERMAL CONCENTRATOR BASED ON SQUARE FLAT FACETS, Thermal Science 3 (2014) 18, , pp , DOI: /TSCI P. 12. Pejić, P., Petković, D., Krasić, S., THE EFFECT OF ARCHITECTURAL FAÇADE DESIGN ON ENERGY SAVINGS IN THE STUDENT DORMITORY, Thermal Science Vol. 18, No. 3, 2014, pp Petković D., ADAPTIVE NEURO-FUZZY FUSION OF SENSOR DATA, Infrared Physics & Technology, Volume 67, November 2014, pp , DOI: /j.infrared Petković D., Shamshirband S., Saboohi H., Ang T. F., Anuar N. B., Pavlović N. T., EVALUATION OF MODULATION TRANSFER FUNCTION OF OPTICAL LENS SYSTEM BY SUPPORT VECTOR REGRESSION METHODOLOGIES A COMPARATIVE STUDY, Infrared Physics & Technology, Volume 65, July 2014, pp , DOI: /j.infrared Petković D., Shamshirband S., Anuar N. B., Mohd H. N. M. N., Pavlović N. T., Akib S., ADAPTIVE NEURO-FUZZY PREDICTION OF MODULATION TRANSFER FUNCTION OF OPTICAL LENS SYSTEM, Infrared Physics & Technology, Volume 65, July 2014, pp , DOI: /S Petković D., Iqbal J., Shamshirband S., Gani A., Pavlović N. D., Mat K. M., KINETOSTATIC ANALYSIS OF PASSIVELY ADAPTIVE ROBOTIC FINGER WITH DISTRIBUTED COMPLIANCE, Hindawi Publishing Corporation, Advances in Mechanical Engineering, vol. 2014, Article ID , 13 pages, DOI: /2014/ Petković D., Pavlović N. T., Shamshirband S., Mat K. M. L., Anuar N. B., Idna I. M. Y. ADAPTIVE NEURO-FUZZY ESTIMATION OF OPTIMAL LENS SYSTEM PARAMETERS, Optics and Lasers in Engineering, Volume 55, April 2014, pp , DOI: /j.optlaseng Petković, M.S., Petković, L.D., Džunić, J. ON AN EFFICIENT METHOD FOR THE SIMULTANEOUS APPROXIMATION OF POLYNOMIAL MULTIPLE ZEROS, Appl. Anal. Discrete Math. 8 (2014), Petrovic, S., Lozanovic-Sajic, J., Knezevic, T., Pavlovic, J., Ivanov, G.: TRIZ METHOD APPLICATION FOR IMPROVING THE SPECIAL VEHICLES MAINTENANCE Journal Thermal Science, vol. 18(1)., pp. S13-S20, DOI: /TSCI P. 20. Rakić D. S., Dinčić N. Č., Djordjević D. S., GROUP, MOORE-PENROSE, CORE AND DUAL CORE INVERSE IN RINGS WITH INVOLUTION, Linear Algebra Appl, vol. 463, December 2014, pp , DOI: /j.laa Stojiljković M., Tomić M., Živković P., Vukić M., Ilić G., NUMERICAL STUDY OF PERFORATED PLATE CONVECTTVE HEAT TRANSFER, pp , DOI: /TSCI T. 22. Stojanović B., Janevski J., Mitković P., Stojanović M., Ignjatović M., THERMALLY ACTIVATED BUILDING SYSTEMS IN CONTEXT OF INCREASING BUILDING ENERGY EFFICIENCY, Thermal Science 2014, Vinca Institute of Nuclear Sciences, Belgrade, 3,18, (online edition), pp , http: //thermalscience.vinca.rs/2014/3, UDC: 621, DOI: /TSCI S. 23. Stojiljković M.M., Stojiljković M.M., Blagojević B.D., MULTI-OBJECTIVE COMBINATORIAL OPTIMIZATION OF TRIGENERATION PLANTS BASED ON METAHEURISTICS, Energies 2014, MDPI AG, 7,12, , pp , DOI: /en Zakaria R., Che N. S. M., Petković D., Shamshirband S., Penny R., INVESTIGATION OF PLASMONIC STUDIES ON MORPHOLOGY OF DEPOSITED SILVER THIN FILMS HAVING DIFFERENT THICKNESSES BY SOFT COMPUTING METHODOLOGIES A COMPARATIVE STUDY, Physica E: Low-dimensional Systems and Nanostructures, Volume 63, September 2014, pp , DOI: /j.physe

8 25. Zakaria R., Sheng O. Y., Wern K., Shamshirband S., Abdul W. A. W., Petkovic D., Saboohi H., EXAMINATION OF TAPERED PLASTIC MULTIMODE FIBER-BASED SENSOR PERFORMANCE WITH SILVER COATING FOR DIFFERENT CONCENTRATIONS OF CALCIUM HYPOCHLORITE BY SOFT COMPUTING METHODOLOGIES A COMPARATIVE STUDY, JOSA A9, Volume 31, Issue 5, May 2014, pp , DOI: /JOSAA Rad u međunarodnom časopisu (M23) 1. Jablan S., Radović Lj., UNKNOTING NUMERS OF ALTERNATING KNOT AND LINKS FAMILIES, Publications de l'institut Mathématique, vol. 95 (109), pp , Janevski G., Kozić P., Pavlović I., MOMENT LYAPUNOV EXPONENTS OF THE PARAMETRICAL HILL S EQUATION UNDER THE EXCITATION OF TWO CORRELATED WIDEBAND NOISES, Structural Engineering and Mechanics, 2014, Techno-Press, pp , DOI: Jovanović, V., Janošević, D., Petrović, N., ANALYSIS OF AXIAL BEARING LOAD OF A ROTATING PLATFORM DRIVE IN HYDRAULIC EXCAVATORS, Tehnički vjesnik/technical Gazette, No.2, Vol.21., pp , 2014, ISSN Lekić P. N., Micić A., Spalević P. C., MODIFIED EIGENFILTER APPROACH FOR DESIGNING DIGITAL FULL-BAND DIFFERENTIATOR OF ARBITRARY ORDER, Rev. Roum. Sci. Techn. Électrotechn. et Énerg., Volume 59, Issue 2, 2014, pp Madić, M., Radovanović, M., Manić, M., Trajanović, M., OPTIMIZATION OF ANN MODELS USING DIFFERENT OPTIMIZATION METHODS FOR IMPROVING CO 2 LASER CUT QUALITY CHARACTERISTICS, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 36, No. 1, pp , Moghri, М., Shahabadi, S., Ismail, S, Madić, М., MODELING TENSILE MODULUS OF (POLYAMIDE 6)/NANOCLAY COMPOSITES: RESPONSE SURFACE METHOD VS. TAGUCHI OPTIMIZED ARTIFICIAL NEURAL NETWORK, Journal of Vinyl and Additive Technology, DOI: /vnl Moghri, M., Shamaee, H., Tavana, R., Madić, M., Shukla, D.K., DETAILED STUDY ON FUSION CHARACTERISTICS OF RIGID POLY (VINYL CHLORIDE) NANOCOMPOSITES: THE COMPARISON OF USING MULTIPLE REGRESSION ANALYSIS AND ARTIFICIAL NEURAL NETWORK, Journal of Vinyl and Additive Technology, DOI: /vnl Nikodijević D., Živojin S., GENERAL CHARACTERISTICS OF UNSTEADY MHD TEMPERATURE BOUNDARY LAYER, International Journal of Non-Linear Mechanics, 11, , 2014, Elsevier, pp. 1-12, DOI: /j.ijnonlinmec Perić S., Antić D., Nikolić V., Mitić D., Marko M., Nikolić S., A NEW APPROACH TO THE SLIDING MODE CONTROL DESIGN: ANTI-LOCK BRAKING SYSTEM AS A CASE STUDY, Journal of Electrical Engineering, Volume 65, Issue 1, 2014, pp , DOI: Petković D., Shamshirband S., Pavlović N. T., Anuar N. B., Mat K. M. L., MODULATION TRANSFER FUNCTION ESTIMATION OF OPTICAL LENS SYSTEM BY ADAPTIVE NEURO-FUZZY METHODOLOGY, Optics and Spectroscopy, Volume 117, Issue 1, July 2014, pp , DOI: /S

9 11. Petković D., Issa M., Pavlović N. D., Zentner L., Daud M. N. R., Shamshirband S., CONTACT POSITIONS ESTIMATION OF SENSING STRUCTURE USING ADAPTIVE NEURO-FUZZY INFERENCE SYSTEM, Kybernetes, Volume 43, Issue 5, 2014, pp , DOI: /K Rackov M., Milovančević M., Kanović Ž., Vereš M., Rafa K., Banić M., Miltenović A., OPTIMIZATION OF HCR GEARING GEOMETRY USING GENERALIZED PARTICLE SWARM OPTIMIZATION ALGORITHM, Tehnički vjesnik/technical Gazette, Volume 21, Issue 4, 2014, pp , UDC: : Radoičić, G., Jovanović, M., Marinković, D., NON-LINEAR INCIDENTAL DYNAMICS OF FRAME STRUCTURES, Structural Engineering and Mechanics, Vol. 52, No. 6, pp , 2014, ISSN , DOI: Radoičić, G., Jovanović, M., Ilić, L., Blagojević, B., EXPERT SHELL FOR ON-LINE DYNAMIC CONTROL OF TRANSPORTATION PROCESS, International Journal of Innovative Technology and Exploring Engineering, Vol. 3, No. 9, 2/2014, pp , ISSN Stamenković D., Tasić M., THE CONTRIBUTION OF COGNITIVE LINGUISTICS TO COMICS STUDIES, Balkan Journal of Philosophy, 2014, Bulgarian Academy of Sciences, Vol.2, No. 6, X, pp Mijailović,I., Radojičić,V., Ecim-Djurić,O., Stefanović,G., Kulić,G., ENERGY POTENTIAL OF TOBACCO STALKS IN BRIQUETTES AND PELLETS PRODUCTION, Journal of Environmental Protection and Ecology 15, No 3, (2014). 17. Stoiljković V., Milosavljević P., Mladenović S., Pavlović D., Todorović M., IMPROVING THE EFFICIENCY OF THE CENTER FOR MEDICAL BIOCHEMISTRY, CLINICAL CENTER NIŠ, BY APPLYING LEAN SIX SIGMA METHODOLOGY, Journal of Medical Biochemistry, Vol. 33, No. 3, pp , Mitić Ž., Najman S., Cakić M. D., Ajduković Z.R., Ignjatović N. L., Nikolić R.S., Nikolić G. M., Stojanović S., Vukelić M., Trajanović M.,, SPECTROSCOPIC CHARACTERIZATION OF BONE TISSUE OF EXPERIMENTAL ANIMALS AFTER GLUCOCORTICOID TREATMENT AND RECOVERY PERIOD, Journal of Molecular Structure (2014) pp Stefanović,G., Skrijelj,H., Ristović,I., Milutinović,B., Milosević,O., Popović,S., SUSTAINABLE WASTE MANAGEMENT MODEL CASE STUDY: NOVI PAZAR, Journal of Environmental Protection and Ecology 15, No 3, (2014). 20. Todorović M. Dragoljub Ž., Mančić M., Ilić G., APPLICATION OF ENERGY AND EXERGY ANALYSIS TO INCREASE EFFICIENCY OF A HOT WATER GAS FIRED BOILER, Chem. Ind. Chem. Eng. Q. 20 (4) (2014). 21. Tomić, V., Marinković, D., Marković, D., THE SELECTION OF LOGISTIC CENTERS LOCATION USING MULTI-CRITERIA COMPARISON: CASE STUDY OF THE BALKAN PENINSULA, Аcta Polytechnica Hungarica, Vol. 11, No.10, pp , 2014, ISSN

10 Rad u časopisu međunarodnog značaja verifikovanog posebnom odlukom (M24) 1. Đorđević D., Milošević L., Cvetković M., O POGRANIČNIM OPŠTINAMA JUGOISTOČNE SRBIJE U NARODNIM NOVINAMA, ТЕМЕ, 2014, Univerzitet u Nišu, Vol.38, No.46, , pp Nikodijević D., Stamenković Ž., UNSTEADY MAGNETOHYDRODYNAMIC HEAT AND MASS TRANSFER PAST THE BODY WITH TIME VARYING WALL TEMPERATURE, THEORETICAL AND APPLIED MECHANICS, S1, 41, , 2014, Serbian Society of Mechanics, Belgrade, pp , UDC: 532.5: : Madić, M., D. Petković, Radovanović, M., GRA APPROACH FOR MULTI-OBJECTIVE OPTIMIZATION OF LASER CUTTING, UPB Scientific Bulletin, Series D: Mechanical Engineering, Vol. 76, No. 4, pp , Madić, M., Radovanović, M., Trajanović, M., Manić, M., ANALYSIS OF CORRELATIONS OF MULTIPLE-PERFORMANCE CHARACTERISTICS FOR OPTIMIZATION OF CO 2 LASER NITROGEN CUTTING OF AISI 304 STAINLESS STEEL, Journal of Engineering Science and Technology Review, Vol. 7, No. 2, pp , Madić, M., Radovanović, M., Manić, M., Trajanović, M., OPTIMIZATION OF CO 2 LASER CUTTING PROCESS USING TAGUCHI AND DUAL RESPONSE SURFACE METHODOLOGY, Tribology in Industry, Vol. 36, No. 3, pp , Madić, M., Kovačević, M., Radovanović, M., APPLICATION OF MULTI-STAGE MONTE CARLO METHOD FOR SOLVING MACHINING OPTIMIZATION PROBLEMS, International Journal of Industrial Engineering Computations, Vol. 5, No. 4, pp , Madić, M., Radovanović, M., OPTIMIZATION OF MACHINING PROCESSES USING PATTERN SEARCH ALGORITHM, International Journal of Industrial Engineering Computations, Vol. 5, No. 2, pp , Pavlović D., Todorović M., Mladenović S., Milosavlјević P., THE ROLE OF QUALITY METHODS IN IMPROVING EDUCATION PROCESS: CASE STUDY, An International Journal for Theory and Practice of Management Science: Serbian Journal of Management, 2 (2014) 9, , pp , DOI: /sjm Simonovic J., STABILITY ANALYSIS OF STATIONARY OSCILLATORY REGIMES OF COUPLED DEFORMABLE BODIES SYSTEM, Theoretical and Applied Mechanics, Vol. 41 (S1), 2014, pp , Serbian Society of Mechanics, Belgrade 2014, ISSN Simonović J., SYNCHRONIZATION IN CHAINS OF MATERIAL PARTICLES WITH NON- LINEAR FEATURES, FME Transactions (2014) 42, No. 4, pp , Faculty of Mechanical Engineering, Belgrade, doi: /fmet s. 11. Stamenković D., Nikolić M., Milošević M., Banić M., Miltenović A., Mijajlović M., TRIBOLOGICAL ASPECT OF RUBBER BASED PARTS USED IN ENGINEERING, Tribology in Industry, Vol. 36, N 1 (2014), pp. 9-16, ISSN: (print version); (electronic version). 12. Stamenković, D., Tasić, M., Antović, M., STAVOVI STUDENATA DEPARTMANA ZA ANGLISTIKU FILOZOFSKOG FAKULTETA U NIŠU PREMA UPOTREBI ĆIRILIČNOG I LATINIČNOG PISMA, ТЕМЕ, 2014, Univerzitet u Nišu, Vol.38, No.1, , pp

11 Naučna kritika i polemika u istaknutom međunarodnom časopisu (M25) Naučna kritika i polemika u međunarodnom časopisu (M26) Uređivanje istaknutog međunarodnog časopisa na godišnjem nivou (gost urednik) (M27) Uređivanje međunarodnog časopisa (M28) Predavanje po pozivu sa međunarodnog skupa štampano u celini (neophodno pozivno pismo) (M31) 1. Jovanović D., RECONSTRUCTION OF ISODYNE OR AIRY STRESS SURFACES BASED ON EXPERIMENTAL DATA, XII Conference on Systems, Automatic Control and Measure (SAUM), 2014, November 2014., pp Jovanović D., ELECTRONIC TECHNIQUES IN EXPERIMENTAL OPTICAL STRESS ANALYSIS, XII Conference on Systems, Automatic Control and Measure (SAUM), 2014, November 2014., pp Marinković S., Rajković P., Stanković M., POLYNOMIALS OF MITTAG-LEFFLER TYPE WITH AN ADDITIONAL PARAMETER, XII Conference on Systems, Automatic Control and Measure (SAUM), 2014, November 2014., pp Pavlović I., Pavlović R., Ćirić I., Nikolić V., NEURAL NETWORK APPLICATION IN NUMERICAL RESULTS FOR DYNAMIC STABILITY ANALYSIS OF VISCOELASTIC DOUBLE BEAM SYSTEM, XII Conference on Systems, Automatic Control and Measure (SAUM), 2014, November 2014., pp Rajković P., Nikolić V., Petrović E., OPTIMIZATION FOR COMPUTATION THE SHORTEST DISTANCE BETWEEN TWO OBJECTS, XII Conference on Systems, Automatic Control and Measure (SAUM), 2014, November 2014., pp Zdravković M., Next GENERATION ENTERPRISE INFORMATION SYSTEMS FOR THE FUTURE INTERNET VISION OF IFAC TC5., 6th ICT Conference (M31), 2014, Regional Chamber of Commerce Niš, Serbia, Serbia, , ISBN , pp Zehn, M., Marinković, D., FAST AND HIGHLY EFFICIENT FORMALISMS FOR STRUCTURAL DYNAMICS SIMULATIONS, XII International Conference on Systems, Automatic Control and Measurements, Niš, Serbia, Zehn, M., Marinković, D., SOME ADVANCED STRUCTURAL DESIGN SOLUTIONS IN THE FIELD OF TRANSPORTATION, The fifth international conference Transport and Logistics, TIL 2014, Niš, Serbia,

12 Predavanje po pozivu sa međunarodnog skupa štampano u izvodu (M32) 1. Mitić Ž., Najman S., Stojanović S., Trajanović T., Cakić M., Ignjatović N., Uskoković D., Stolić A., FTIR AND SEMEDX SPECTROSCOPIC CHARACTERIZATION OF BIOMATERIAL, 12th International Conference on Fundamental and Applied Aspects of Physical Chemistry (M32), 2014, The Society of Physical Chemists of Serbia, Serbia, , ISBN

13 Saopštenje sa međunarodnog skupa štampano u celini (M33) 1. Antić D., Nikolić V., Nikolić S., Perić S., Trajković D., Milovanović M., FUZZY CONTROL APPLIED ON THE THREE PARALLEL PUMPS MODELLED BY BOND GRAPHS, Proceedings of the XII International Conference on Systems, Automatic Control and Measurements, SAUM, ISBN , Niš, Serbia, 2014, pp Anđelković B., Milčić D., Rashid Amir M., Mustafa Amir M., ON THE EFFECT OF NORMAL LOAD AND SLIDING SPEED ON WEAR UNDER DRY SLIDING CONTACT ON THE BRASS (70-30,60-40), VIII International Conference "Heavy Machinery-HM, 2014, Serbia, , pp , ISBN : Anđelković B., Djordjević B., Jovanović N., ABOUT METHODS FOR STRESS CONCENTRATION FACTOR PREDICTION IN WELDED JOINT, XII International SAUM Conference on Systems. Automatic Control and Measurements 2014, Faculty of Electronic Engineering and the Faculty of Mechanical Engineering, University of Niš, Serbia, , pp , ISBN Arsić, M., Jovanović, M., Tomić, V., Marković, D., Radoičić, G., CALIBRATION OF THE NEW TECHNICAL SOLUTION FOR CONTACT MEASUREMENT OF THE ROTATION SPEED, XII International SAUM Conference on Systems, Automatic Control and Measurements, Niš, Nov 2014, pp Arsić, M., Jovanović, M., Radoičić, G., Tomić, V., Marković, D., TECHNICAL DEVICE SOLUTION FOR KINEMATICS CONTROL OF MINING EXPORT MACHINES, The Fifth International Conference Transport and Logistics TIL2014, Niš, 5-6 June 2014, pp Arsić S., Vitković N., Madić M., Manić M., Mišić D., Stojković M., Trajanović M., GEOMETRICALLY DEFINED CLOUD OF ANATOMICAL POINTS OF HUMAN FEMUR TROCHANTERIC AND NECK REGION, 6th ICT Conference, 2014, Regional Chamber of Commerce Niš, Serbia, ISBN pp Arsić S., Vitković N., Manić M., Stojković M., MORPHOLOGICAL PROPERTIES OF THE HAND BONES IMPORTANT FOR THEIR 3D GEOMETRICAL MODELING, 6th ICT Conference, 2014, Regional Chamber of Commerce Niš, Serbia, ISBN , pp Ayed S., Jovanović M., Pavlović S., Petrović E., INSTABILITY OF RAYLEIGH-BERNARD CONVECTION AFFECTED BY LOWER WALL TEMPERATURE VARIATION, 45 th International Congress & Exhibitionon Heating, Refrigeration and Air Conditioning Belgrade, Sava Center, 3 5. XII 2014, PROCEEDINGS, ISBN , COBISS.SR-ID , pp Banić M., Miltenović A., Miltenović V., FEM AND EXPERIMENTAL DETERMINATION COEFFICIENT OF FRICTION OF CROSSED HELICAL GEARS WITH WHEELS FROM SINTERED STEEL, Proceedings of the International Symposium Theory and Practice of Gearing 2014, ISBN , Izhevsk, Russia, 2014, pp Miltenović A., Banić M., Stamenković D., Milošević M., Tomić M., DETERMINATION OF FRICTION HEAT GENERATION IN CONTACT OF WHEEL-RAIL SET USING FEM, Proceedings of the 16 th International Scientific-Expert Conference on Railways, RAILCON, ISBN , Niš, Serbia, 2014, pp Banić M., Miltenović A., Miltenović V., Janići S., UNIVERSITY TEACHING AND AUTHORITATIVE COMPETENCES OF PRODUCT DEVELOPMENT ENGINEERS, of the 8th International Symposium - Machine and Industrial Design in Mechanical Engineering, KOD, ISBN , Balatonfüred, Hungary, 2014, pp

14 12. Banić M., Miltenović A., Miltenović V., ROLE AND IMPORTANCE OF LIGHTWEIGHT DESIGN IN THE PRODUCT DEVELOPMENT, Proceedings of the 2 nd International Scientific Conference Conference on Mechanical Engineering Technologies and Applications, COMETa, ISBN , Jahorina, Bosna i Hercegovina, 2014, pp Blagojević V., Janković P., Randelović S., APPLICATION OF DIGITAL SLIDING MODES TO SYNCHRONIZATION OF THE WORK OF TWO HYDRAULIC CYLINDERS, XII International Conference on Systems. Automatic Control and Measurements 2014, University of Nis, Faculty of Electronic Engineering and Faculty of Mechanical Engineering, Serbia, pp , ISBN , UDC: 621(082) 621:004(082) 531/534(082) 174:621(082) (082). 14. Blagojević V., Stojiljković M., APPLICATION OF DIGITAL SLIDING MODES CONTROL OF SEMI-ROTARY PNEUMATIC DRIVE UTILIZING LOAD TORQUE AND BY-PASS VALVE, XII International Conference on Systems. Automatic Control and Measurements, 2014, University of Nis, Faculty of Electronic Engineering and Faculty of Mechanical Engineering, Serbia, pp , ISBN , UDC: 621(082) 621:004(082) 531/534(082) 174:621(082) (082). 15. Blagojević, V., Stojiljković, M., Marinković, I., GRIPPERS IN MANIPULATION PROCESSES, Proceedings of 5th International Conference Transport and Logistics, ISBN , Niš, Serbia, 2014, pp Blagojević, V., M., Marinković, I., THE APPLICATION OF RFID TECHNOLOGY IN THE TOOLS SUPPLY OF CNC MACHINE, Proceedings of 5th International Conference Transport and Logistics, ISBN , Niš, Serbia, 2014, pp Blagojević V., Janković P., Ranđelović S., APPLICATION OF DIGITAL SLIDING MODES TO SYNCHRONIZATION OF THE WORK OF TWO HYDRAULIC CYLINDERS, XII International SAUM Conference on Systems, Automatic Control and Measurement, 2014, Faculty of Electronic Engineering Niš, Faculty of Mechanical Engineering Niš, Srbija, , pp Blagojević B., Stojiljković M., Stojiljković Mladen., MULTIOBJECTIVE COMBINATORIAL OPTIMIZATION OF TRIGENERATION PLANTS BASED ON METAHEURISTICS, Ecos 2014-the 27th international conference on Efficiency. Cost. Optimization. Simulation and environmental impact of energy systems 2014, ABO AKADEMI UNIVERSITY (aa), thermal & flow engineering, , Finland, , pp , Bogdanović B., Bogdanović-Jovanović J., Milenković D., Stamenković Ž., OPTIMIZATION OF AXIAL PICO HYDRO TURBINE, XII International SAUM Conference on Systems. Automatic Control and Measurements, Faculty of Electronic Engineering and the Faculty of Mechanical Engineering, University of Niš, Serbia, , ISBN: Ćirić I., Živković P., Tomić M., WIND ENERGY IN SOUTHEAST SERBIA, Proceedings of the XII International Conference on Systems, Automatic Control and Measurements, SAUM, ISBN , Niš, Serbia, 2014, pp Ćojbašić Ž., Dučić N., Slavković R., THE APPLICATION OF NEURAL NETWORK IN MANAGING WHITE CAST IRON PRODUCTION, Proceedings of the 2 nd International Scientific Conference Conference on Mechanical Engineering Technologies and Applications, COMETa, ISBN , Jahorina, Bosna i Hercegovina, 2014, pp Ćojbašić Ž., Dučić N., Slavković R., FLOATING BALLS WEAR RATE PREDICTION USING BACK PROPAGATION AND RBF NEURAL NETWORKS, Proceedings of the 8th International Symposium - Machine and Industrial Design in Mechanical Engineering, KOD, ISBN , Balatonfüred, Hungary, 2014, pp

15 23. Djordjević B., Anđelković B., DIGITAL IMAGE PARAMETER ENHANCEMENT WITH HOMOMORPHIC FILTERING, XII International SAUM Conference on Systems. Automatic Control and Measurements (MM). 2014, Faculty of Electronic Engineering and the Faculty of Mechanical Engineering, University of Niš, Serbia, , pp , ISBN Dimitrijević, J.,, Petković, D., RAILWAY LINES FOR FAST TRAINS IN JAPAN, Proceedings of the XVI Scientific-Expert Conference on Railways - RAILCON 14, Niš, Serbia, October 9-10, 2014, pp Đenadić D., Manić M., Ranđelović S., Tanikić D., Brodić D., DETERMINATION OF THE CHARACTERISTIC TRANSFORMATION TEMPERATURES OF THE BIOCOMPATIBLE SHAPE MEMORY ALLOYS, International Academic Conference on Engineering, Internet and Technology, Czech Institute of Academic Education, Prag, Ceska, 2014, ISBN , pp Đenadić D., Manić M., Ranđelović S., Tanikić D., Đoković J., Žikić M., Petrović D., Stojanović G., FINITE ELEMENT ANALYSIS OF TOTAL KNEE REPLACEMENT DURING GAIT CYCLE, 46th International October Conference on Mining and Metallurgy, 2014, Tehnički fakultet u Boru, Srbija, ISBN , pp Đenadić D., Manić M., Tanikić D., Đoković J.,. Žikić M, Petrović D., Stojanović G., ANALYSIS OF TOTAL KNEE PROSTHESES USING THE FINITE ELEMENT METHOD, 46th International October Conference on Mining and Metallurgy, 2014, Tehnički fakultet u Boru, Srbija, ISBN , pp Đenadić D., Tanikić D., Đoković J., COMPARATIVE TECHNOECONOMIC ANALYSIS OF TECHNOLOGIES FOR CREATION OF PERSONALIZED OSTEOFIXATION MATERIALS, International may conference on strategic management, 2014, Tehnički fakultet u Boru, Srbija, ISBN , pp Đorđević D., Osmani I., A PARTIAL RECONSTRUCTION OF THE ROMANI CULT PLACE: THE BLACKSMITH S SHOP IN PREŠEVO, Cult Places on the Border (M33), 2014, Yugoslav Society for the Scientific Study of Religion and Faculty of Mechanical Engineering at the University of Niš, 21, , Serbia, June 2014, pp Glackin, C., Salge, C., Greaves, M., Polani, D., Slavnić, S., Ristić-Durrant, D., Leu, A., Matjačić, Z. (2014). GAIT TRAJECTORY PREDICTION USING GAUSSIAN PROCESS ENSEMBLES, 2014 IEEE-RAS International Conference on Humanoid Robots, Madrid, Spain. 31. Golubović I., Golubović Z., Najman S., Petrović S., Radovanović Z., Stojanović S., Trajanović M., Baščarević Z, Stoiljković P., Trenkić Božinović M., Stanisavljević M, Janjić M., Stojanović S., Stamenić S., Ćirić M., Stanisavljević M., APPLICATION OF TELEMEDICINE IN TREATMENT OF COXARTHROSIS USING CEMENTLESS ENDOPROSTHESIS OF THE HIP JOINT WITH FITMORE HIP STEM, 6th ICT Conference (M33), 2014, Regional Chamber of Commerce Niš, Serbia, ISBN , pp Stojiljković M., Ignjatović M., Vučković G., GREENHOUSE GASSES EMISSION ASSESSMENT IN RESIDENTIAL SECTOR THROUGH BUILDINGS SIMULATIONS AND OPERATION OPTIMIZATION, 1st South East Europe Conference on Sustainable Development of Energy. Water and Environment Systems 2014, SDEWES, BJR Makedonia, , pp , 0134, 15http:// 33. Janevski Jelena N., Stojanovic Branislav V, Mitrovic Dejan M., Stojanovic Milica B., RENEWABLE ENERGY SOURCES IN SERBIA - THE SMALLER URBAN UNIT IN THE CITY OF NIS, 27. međunarodni kongres o procesnom inženjerstvu PROCESING '14, septembar 2014, kompletan rad izdan na CD-u. 20

16 34. Janković P,. Blagojević V., THE INFLUENCE OF PROCESS PARAMETERS IN THE MODELING OF ABRASIVE WATER JET CUTTING, XII International Conference on Systems. Automatic Control and Measurements 2014, University of Nis, Faculty of Electronic Engineering and Faculty of Mechanical Engineering, Serbia, , pp , ISBN , UDC: 681.5(082) 62-52(082) (082) 53.08(082) 007:004(082) (082) 35. Janošević, D., Pavlović, J., Jovanović, V., Milić, P., OPTIMAL SYNTHESIS OF THE DRIVING MECHSNISM OF BUCKET ARTICULATED TRUCKS, VIII International Conference Heavy Machinery-HM 2014, Zlatibor, June 25-28, 2014, pp. A Janošević, D., Savić, I., Jovanović, V., Pavlović, J., REGULATION FOR HYDROSTATIC TRANSMISSION OF MACHINES AND VEHICLES, XII International SAUM Conference on Systems, Automatic Control and Measurements, Niš, November 12-14, 2014, pp Janošеvić, D., Jovanović, V., Pavlović, J., ANALYSIS OF THE PERFORMANCE PARAMETERS OF MOBILE MACHINES, 6st International Scientific Conference Science and higher education in function of sustainable development SED 2014, October 3-4, 2014, pp Janošеvić, D., Jovanović, V., Pavlović, J., Milić, P., ANALYSIS OF A MOVEMENT RESISTANCE OF CRAWLER MOBILE MACHINES, International scientific conference COMETa 2014, East Sarajevo, December 2-5, 2014, pp , Janošеvić, D., Pavlović, J., Jovanović, V., APPLICATION OF THE MOBILE MACHINES IN RAILWAY TRANSPORT, International Scientific-Expert Conference On Railways, Niš, Serbia, October 9-10, pp , Janošević, D., Pavlović, J., Savić, I., Marković, S.: OPTIMIZATION OF THE POWERTRAIN MANIPULATOR MECHANISMS WITH HYDROSTATIC DRIVE, The Fifth International Conference Transport And Logistics, TIL 2014, June , pp , Jovanović M., Jovanović D., Živković N., Živković N., Raos M., BELT CONVEYOR DRIVE GEARBOX PROBLEM CAUSED BY UNPAIRED GEARS: A CASE STUDY, Proceedings of the 24th International Cnference Noise and Vibration", Niš, ISBN , pp Jovanović M., Tasić M., Žikić B., THE MEMORIAL IN ROGLJEVO (NEGOTIN), Cult Places on the Border (M33), 2014, Yugoslav Society for the Scientific Study of Religion and Faculty of Mechanical Engineering at the University of Niš, 21, , Serbia, June 2014, pp Jovanović, M., Radoičić, G., DYNAMICAL STRUCTURAL RELIABILITY BASED ON THE CASE STUDY ANALYSIS, 24th International Conference Noise and Vibration, Niš, Oct. pp , Jovanović, M., Radoičić, G., DYNAMICAL RESPONSE OF STRUCTURES TO MALICIOUS AND RANDOM ACTIONS, The Fifth International Conference Transport and Logistics TIL2014, Niš, 5-6 June, pp , Jovanović, M., Radoičić, G., Marković, D., DESIGN CHALLENGE OF LARGE FRAME STRUCTURES, The 8th International Conference Machine and Industrial Design in Mechanical Engineering, COD 2014, Balaton, June 2014, pp , Jovanović S., Jovanović D., Planić S., MEASUREMENT OF WIRE PRESTRESSING FORCE TO QUALITY OF CONCRETE SLEEPERS, Proceedings of the 16 th International Scientific-Expert Conference on Railways, RAILCON, ISBN , Niš, Serbia, 2014, pp Jovanović S., Jovanović D., Jovanović M., Đukić S., IMPLEMENTATION OF PIC CONTROLER IN AIR PURIFYING SYSTEMS, Proceedings of the XII International Conference on Systems, Automatic Control and Measurements, SAUM, ISBN , Niš, Serbia, 2014, pp

17 48. Jovanović, V., Janošević, D., Đokić, R., Pavlović, J., SOFTWARE DEVELOPMENT FOR OPTIMAL SYNTHESIS OF SLEWING PLATFORM DRIVE MECHANISM OF MOBILE MACHINE, The Fifth International Conference Transport And Logistics, TIL 2014, June , pp , Jovanović, V., Janošević, D., Pavlović, J., Petrović, N., DEFINITION OF DIRECTED DIGGING FORCE FOR ASSESSMENT OF THE HYDRAULIC EXCAVATOR WORK, The 8th International Symposium - KOD MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, June , pp , Jovanović, V., Janošević, D., Pavlović, J., Petrović, N., CONTROL OF SLEWING PLATFORM DRIVE OF MOBILE MACHINES, XII International SAUM Conference on Systems, Automatic Control and Measurements, Niš, November 12-14, 2014, pp Jovanović, V., Janošević, D., Pavlović, J., THE KINEMATIC AND DYNAMIC ANALYSIS OF THE HYDRAULIC EXCAVATORS, VIII International Conference Heavy Machinery-HM 2014, Zlatibor, June 25-28, 2014, pp. A Jovanović, V., Janošеvić, D., Petrović, N., MANAGING PROJECT RISK USING ANALYTHICAL HIERARCHICAL PROCESS, 6st International Scientific Conference Science and higher education in function of sustainable development SED 2014, October 3-4, 2014, pp Jovanović, V., Janošеvić, D., Pavlović, J., DECISIONS ABOUT THE CHOICE OF SUPPLIERS WITH AHP METHOD, IV International Conference Industrial Engineering And Environmental Protection 2014 (IIZS 2014), Zrenjanin, Serbia, October 15th, 2014, pp , Jovanović, V., Janošević, D., Pavlović, J., ANALYSIS AND SYNTHESIS DRIVE MOVEMENT OF HYDRAULIC EXCAVATORS, International scientific conference COMETa 2014, East Sarajevo, December 2-5, 2014, pp , Kocić M., Nikodijević J., Stamenković Ž., CONTROL OF FLOW AND HEAT TRANSFER USING SUCTION, MAGNETIC AND ELECTRIC FIELDS, XIIInternational SAUM Conference on Systems. Automatic Control and Measurements Niš, Faculty of Mechanical Engineering Niš, Serbia, pp , pp , ISBN Korunović N., Mihailović D., Najman S., Petrović S., Rajković J., APPLICATION OF COMPUTED TOMOGRAPHY IN DIAGNOSTICS AND MANAGEMENT OF OSTEOPOROSIS, 6th ICT Conference, 2014, Regional Chamber of Commerce Niš, Serbia, ISBN , pp Kyrarini, M., Slavnić, S., Ristić-Durrant, D.(2014). CONTROL OF THE MOBILE PLATFORM OF THE CORBYS MOBILE ROBOTIC GAIT REHABILITATION SYSTEM, XII International SAUM Conference on Systems, Automatic Control and Measurements, Nis, Serbia, November Laković M., Jović M., Stefanović G., Mitrović S., LIGNITE AS THE BASIC ENERGY SOURCE IN SERBIA, THE CHARACTERISTICS AND CAPABILITIES FOR MORE EFFICIENCY USE, Međunarodna konferencija Elektrane, 2014, Society of Thermal Engineers of Serbia, , Serbia, , pp Laković M., Mitrović S., Jović M., THE CHOICE OF SURFACE CONDENSER IN FUNCTION OF ENERGY EFFICIENCY OF THERMAL POWER PLANT, Međunarodna konferencija Elektrane, 2014, Society of Thermal Engineers of Serbia, , Serbia, , pp Laković M., Mitrović S., Jović M., TRANSPORT AND DEPOSITION OF SLAG AND ASH, The fifth international conference Transport and logistics, 2014, Faculty of Mechanical Engineering in Nis, , Serbia, pp

18 61. Laković M., Slobodan Mitrović, Jović M., AIR POLLUTION FROM TRANSPORT, The fifth international conference Transport and logistics, 2014, Faculty of Mechanical Engineering in Nis, , Serbia, , pp Laković M., Mitrović S., Jović M., AIR POLLUTION FROM TRANSPORT, The fifth international conference Transport and logistics, Mašinski fakultet u Nišu, Serbia, , pp , , Leu, A., Ristić-Durrant, D., Gräser, A. (2014). CORBYS COGNITIVE CONTROL ARCHITECTURE FOR SUPPORTING THE INTEGRATION OF LARGE SCALE ROBOTICS RESEARCH PROJECTS, XII International SAUM Conference on Systems, Automatic Control and Measurements, Nis, Serbia, November Madić, M., Marković, D., Petrović, G., Radovanović, M., APPLICATION OF COPRAS METHOD FOR SUPPLIER SELECTION, Proceedings of 5th International Conference Transport and Logistics, ISBN , Niš, Serbia, 2014, pp Madić, M., Radovanović, M., Blagojević, V., Kovačević, M., OFF-LINE CONTROL OF CO 2 LASER CUTTING PROCESS USING SOFTWARE PROTOTYPE, Proceedings of the XII International SAUM Conference on Systems, Automatic Control and Measurements, ISBN , Niš, Serbia, pp , Madić, M., Radovanović, M., Marković, D., Petrović, G., APPLICATION OF COPRAS METHOD FOR SELECTION OF COMPETITIVE NON-CONVENTIONAL MACHINING PROCESSES, Proceedings of the VIII Triennial International Conference Heavy Machinery - HM 2014, ISBN , Zlatibor, Serbia, pp , Madić, M., Vitković, N., Trifunović, M., APPLICATION OF THE WASPAS METHOD FOR SOFTWARE SELECTION, Proceedings of the 6th International ICT Conference, ISBN , Niš, Serbia, pp , Madić, M., Petković, D., Tomić, V., APPLICATION OF THE COPRAS METHOD FOR MATERIAL HANDLING EQUIPMENT SELECTION, Proceedings of the 3rd International Congress Science and Management of Automotive and Transportation Engineering, ISBN , Craiova, Romania, pp , Mančić M., Živković D., Todorović M., Jovanović, M., MATHEMATICAL MODELS FOR EVALUATING EVAPORATION RATES FROM FREE WATER SURFACE OF INDOOR SWIMMING POOLS, XII International SAUM Conference on Systems, Automatic Control and Measurements, 2014, Faculty of Mechanical Engineering in Nis, , Serbia, , pp Mančić M., Živković D., Todorović M., SIMULACIJA SOLARNOG SISTEMA ZA POTREBE ZATVORENIH PLIVAČKIH BAZENA, Proceedings of the 2nd International Scientific Conference COMETa, 2014, University of East Sarajevo, Faculty of Mechanical Engineering, , BiH, Republic of Srpska, , pp Mančić M., Živković D., Todorović M., SIMULATION OF HEATING AND VENTILATION SYSTEM OF INDOOR SWIMMING POOLS, 45 Kongres o grejanju, hlađenju i klimatizaciji KGH, 2014, Drustvo Termicara Srbije, , Serbia, pp Mančić M., Živković D., Todorović M., COMPARISON OF ANNUAL PERFORMANCE OF MICROTRIGENERATION SYSTEMS, International Scientific Conference UNITECH, 2014, Technical University of Gabrovo, , Bulgaria, , pp Mančić M., Živković D., Đorđević M., TodorovićM., EXPERIMENTAL EVALUATION OF EVAPORATION RATES FROM WATER SURFACE OF AN INDOOR SWIMMING POOL, IV International Conference Industrial Engineering And Environmental Protection 2014, 2014, Univerzitet U Novom Sadu Tehnički Fakultet Mihajlo Pupin, Zrenjanin, , Serbia, , pp