GMA Certification Group

Transcription

1 GMA Certification Group BUILDING SURVEYORS ACN Queensland s leaders in Building Certification Services INFORMATION SHEET DOMESTIC BUILDING PACK FOR DWELLINGS & MINOR STRUCTURES The pack includes the information and the appropriate application forms required for you to submit your building application. To assist you in preparing the documentation please use the check list. The terminology used is included in the explanatory information. The following information is included: 1. CHECKLIST 2 1. QUOTE/INVOICE EXPLAINED 3 2. HOW MANY SETS OF PLANS TO LODGE 3 3. WHAT IS A REGISTERED PLAN OR SURVEY PLAN & TITLE? 3 4. WHAT IS A SITE PLAN? 4 5. WHAT IS A COMPETENT PERSON? 4 6. WHEN DOES QUEENSLAND BUILDING SERVICES AUTHORITY(BSA) INSURANCE APPLY? 5 7. WHEN IS AN OWNER BUILDER PERMIT REQUIRED? 5 8. WHEN DOES PORTABLE LONG SERVICE LEAVE LEVY (Q-LEAVE) APPLY? 5 9. APPLICATION FORMS? 5 THE APPLICATION FORMS WHICH MAY BE REQUIRED ARE ATTACHED. THESE FORMS MUST BE COMPLETED IN FULL. CONTRACT OF ENGAGEMENT FORM 1 (IDAS) FORM 2 (IDAS) ENERGY ASSESSMENT SUPPLEMENTARY INFORMATION FORM 1 (PLUMBING) 10. ELECTRONIC LODGEMENT BRANCH LOCATIONS 7 If you have any enquiries please do not hesitate to contact any of our branches located throughout Queensland. Thank you for selecting GMA Certification Group as your preferred Building Surveyor. BUILDING APPROVALS & INSPECTIONS BUILDING CERTIFICATION FIRE SAFETY AUDITS VER06/16

2 GMA Certification Pty Ltd 1. Checklist n/a - not applicable Provided Not Provided Item Detail Checked 1 Part 1 (IDAS) completed 2 Part 2 (IDAS) completed 3 Contract of Engagement signed 4 Architectural Plans 5 Engineering Plans 6 Form 15 ( Design certificate) for all Engineer Designed Structural elements 7 Soil Test 8 Energy Efficiency Assessment or Energy Efficiency Supplementary Information Form (completed) 9 Portable Long Service Leave Levy (Q-Leave) 10 BSA insurance Confirmation of Insurance 11 Owner Builder Permit 12 A Current Title & Registered Plan 13 Copy of Plan of Development (if applicable) 14 Copy of Covenant Approval (if applicable) 15 Landscaping Plans (where applicable) 16 AS Constructed Sewer and Stormwater Plans 17 Forms 1 (Plumbing) 18 On-site Sewerage Reports (where applicable) 19 On-site Sewerage Facility application Form PD F13 or the Evaluators site information Form or the On-site Sewerage Faculties Evaluators Compliance Certificate (the name of this form varies from council to council) (where applicable) Inspections by Competent Person If using a competent person please select the inspection that 20 they will be carrying out : Footing/Pier Slab Frame 2 of 7

3 GMA Certification Pty Ltd 1. Quote/Invoice Explained Quite often a quote will be given to you before forms are completed. If, when the submission is received it differs from the quote given then we reserve the right to make the necessary changes. This can include items such as Added structures shown on the forms which were not clear on the plans Works being assessed are as constructed (already built) Works are being carried out by owner builder It is GMA Certification Pty Ltd policy to not pay any outgoings (incl but not limited to council applications, searches etc) without first receiving payment. It is GMA Certification Pty Ltd policy that no application continues through to the assessment process without first receiving payment. 2. How many sets of plans to lodge GMA Certification is striving to become a paperless office; therefore electronic format is our preferred method. As a result only 1 copy is required for each set of plans (Architectural Plans, Engineering Plans, Soil Test, etc). All paper format documents are scanned into our electronic database. 3. What is a Registered Plan or Survey Plan & Title? A registered plan is a plan of your property showing the true dimensions and layout of your boundaries. The plan, surveyed at sub-division stage, is then registered with the Department of Environment and Resource Management (DERM). If you need to obtain a copy of your registered plan & Title, visit for details. The title provides written information on the easements, such as the dimensions and who the easements belong to. A registered plan & title will show any easements and access restrictions on the allotment at the time the plan was registered. However, additional plans showing easements on your property can be lodged at a later date. When obtaining a copy of the original registered plan & Title make sure you ask for any other registered plans that show any additional easements on you property. In some cases you end up with 2 or 3 plans all showing details of easements on you property. Structures or land surface alterations cannot be built inside councils easements but may be built up to their boundaries in some cases and other cases the council requires that there be a minimum distance that is required for the structure to be built away from the easement boundary. The easement must be kept free of obstructions in the event that access is needed to the easement. 3 of 7

4 GMA Certification Pty Ltd 4. What is a Site plan? A site plan shows the location of all structures on the property. The following details must be shown on the site plan: Location of the proposed structure Setbacks from boundaries these distances should always be to the outermost projection of the structure Any existing building should be clearly marked Property description (Lot & Registered Plan No.) Location of the road and street name Location and dimensions of any easements Total floor area of proposed structure Site coverage (total area of all structures on the property) Scale of plans Contours of the property Building platform level and finished floor level Positions where the heights of retaining walls Driveway location and grade Location of swimming pool fences, gates and filtration equipment including pipelines (where applicable) Location of sewerage lines/manholes/connection points, septic tanks trenches disposal areas Size and location of downpipes and methods of disposal PLEASE NOTE: It is important that all plans are drawn by appropriately licensed persons and must include all required information such as Detailed Site Plan, Floor Plan, Elevation, Section, Timber Sizes, Tie-down, and Bracing. The plans must show all relevant information to enable us to determine compliance with the Building Code of Australia, Australian Standards and Local Authority Town Planning Schemes. The failure to provide information or documentation on receipt of the application could result in the delay in the determination of the application and may incur additional charges for us to obtain the information. 5. What is a Competent Person? Is someone other than the Building Certifier who carries out inspections (usually the engineer who designed the engineering plans). In order for this person to carry out inspection they are required to be deemed a Competent Person by GMA Certification Group PRIOR to the inspection being carried out 4 of 7

5 GMA Certification Pty Ltd 6. When does Queensland Building Services Authority(BSA) insurance apply? Licensed registered Builders undertaking work over $3300 in contract value require BSA insurance (swimming pools do not require BSA insurance). A copy of the Confirmation of Insurance Certificate is to be provided PRIOR to the release of your approval. You should contact Queensland Building Services Authority (QBSA) for all enquiries regarding fees and methods of payment When is an Owner Builder Permit Required? Owner Builders undertaking Building work over $11000 in value require an Owner Builder Permit. A copy of the Owner Builder Permit is to be provided PRIOR to the release of your approval. 8. When does Portable Long Service Leave Levy (Q-Leave) apply? For Building and Construction work where the cost of works is $ or more. The levy is calculated based on the cost of works price and can be paid at your Local Post Office or online at A copy of the payment receipt is to be provided PRIOR to the release of your approval. 9. Application Forms? The application forms which may be required are attached. These forms must be completed in full. Contract of Engagement (The Integrated Planning Act requires that when you engage a Private Certifier it must be by a written contract) Form 1 (IDAS) Common details for all applications, must be completed in full. Form 2 (IDAS) Building work assessment, must be completed in full. Energy Assessment Supplementary Information This form needs to be completed with all new dwellings, room additions/alterations/extensions. This form only needs to be completed if you are engaging GMA Certification to provide the energy assessment. Form 1 (Plumbing) Plumbing & Drainage Act 2002 must be completed when applicable This form only needs to be completed if you wish GMA to submit the plumbing application to your Local Council on your behalf A fee applies for this service. 5 of 7

6 GMA Certification Pty Ltd 10. Electronic Processes GMA Certification are striving to be a paperless office, therefore electronic format is our preferred method for submission and issuing applications and approvals. Applications that come in paper format are scanned into the system, and only one physical copy of the plans are kept in the office for inspection purposes. New Applications A dedicated address has been set up specifically for applications to be submitted. This address is: applications@gmacert.com.au Please note we only need one copy of each document. When the is received, the application is entered into our database in the same process that a physical hard copy submission would be. Additional Incoming Information If at any stage more documentation is required, this can be ed in to the applications address. applications@gmacert.com.au Approvals When the application is ready to be issued to the applicant, the approval will be sent by . Inspections Bookings Inspections can be booked by . A reply is sent back to confirm the booking. The inspection address is: inspections@gmacert.com.au 24 hours notice is still required for all inspection bookings, except for remote areas where we ask for 48 hours notice. When booking inspection please include: Type of inspection Property Address including lot number Date of preferred inspection Site contact person and phone number Any additional notes relating to inspection (i.e an inspector to contact you to arrange access) No guarantee can be given on times requested on inspections as there are constraints on the travel times and distances, however our inspectors will try to see that all notes regarding time of inspections are met. Preferred times can be requested for Piers/Footing/Slab inspections only. 11. GMA Branch Locations 6 of 7

7 GMA Certification Pty Ltd If you have any further questions in relation to any of the above, please feel free to contact us on the details provided below. GOLD COAST Suite Lawrence Dve, Nerang PO Box 2760, Nerang QLD 4211 PH: (07) FAX: (07) PORT DOUGLAS Craiglie Business Park, Owen Street, Craiglie PO Box 831, Port Douglas QLD 4877 PH: (07) FAX: (07) CABOOLTURE Unit 3, 5 Hasking Street, Caboolture PO Box 2760, Nerang QLD 4211 PH: (07) FAX: (07) adminsc@gmacert.com.au CAIRNS 310 Gatton Street, Manunda QLD 4870 PO Box 2760, Nerang QLD 4211 PH: (07) FAX: (07) Admincns@gmacert.com.au CHINCHILLA PO Box 2760, Nerang QLD 4211 PH: (07) FAX: (07) adminsw@gmacert.com.au CHILDERS 4 Randall St, Childers PO Box 181, Childers QLD 4660 PH: (07) FAX: (07) adminwb@gmacert.com.au TOWNSVILLE 1/1 Smith Street, Hyde Park QLD 4815 PO Box 2760, Nerang QLD 4211 PH: (07) FAX: (07) admintsv@gmacert.com.au 7 of 7

8 GMA Certification Group BUILDING SURVEYORS ABN Queensland s leaders in Building Certification Services CONTRACT OF ENGAGEMENT FOR BUILDING CERTIFICATION SERVICES RECITALS 1.1. This Contract serves to satisfy the provisions of Chapter 6 of the Building Act 1975 (Act) for the provision of building certification services GMA Certification Group Pty Ltd (GMA) is authorised under s138 of the Act to undertake private certifying functions The Applicant has requested GMA to provide building certification services in respect to the works described at 3 for the address as shown at 4 below 1.4. Fees for this Contract are detailed on your Quotation / Tax Invoice. APPLICANT ABN (if Company).... Address: Phone No:... Mobile: DESCRIPTION OF WORK (Please describe all the works to be included in the assessment) Are any of the works As Constructed Are the works to be undertaken as Owner Builder Are the works subject to any Show Cause/Enforcement SITE ADDRESS: Suburb... GMA OBLIGATIONS Yes/No Yes/No Yes/No GMA Shall: Issue the relevant building approval/s when : The client pays any monies owed for the work associated with the issuing of the approval/s; and The designs comply with the National Construction Code 5.6. Send all documents as required by the Act to the Local Government within the time frames specified in the Act Carry out as many inspections as GMA considers necessary in addition to any mandatory stage inspections Shall issue the final inspection certificate or certificate of classification when: The approved documentation has been complied with including any other development permits relevant to the works The building works are suitable for occupation or use in accordance with their classification under the National Construction Code Maintain the minimum levels of insurance as required by the Act for the duration of the works. APPLICANT OBLIGATIONS The Applicant shall: Provide all relevant drawings, plans, statutory plans and other relevant documentation to GMA and declares that the plans that form part of this engagement are a true and accurate representation of the proposed development and illustrate all features on the land including existing building and structures, vegetation and services either above and/or below the ground 6.2. Pay the agreed amount in accordance with this contract or any signed agreement between the applicant and GMA 6.3. Attend any meetings if required by GMA 6.4. Comply with any notices that GMA issues 6.5. Provide any certificates as may be requested by GMA 6.6. Provide all information that the applicant can reasonably obtain to enable GMA to fulfil its contractual obligations 6.7. Act in good faith, in accordance with the Act and in a cooperative fashion CONTRACTUAL TERMINATION If: The applicant fails to pay any money owing to GMA after 7 days of the money becoming payable; or 7.9. The applicant has an execution levied against it, assigns or attempts to assign its estate for the benefit of its creditors, intends to or attempts to makes a composition or Scheme of Arrangement with creditors, has a winding up order made against it, intends or attempts to pass a resolution for winding up, goes into liquidation, has a manager or receiver appointed, has a mortgagee taking possession of any part of the property, has an administrator or provisional liquidator appointed becomes insolvent or bankrupt; or The applicant breaches the contract in any respect; or Does not permit the issuing of the final inspection certificate or certificate of classification within 60 days from the date of practical completion; GMA May terminate this contract by sending written notice to the applicant stating the breaches. Termination will take effect when the applicant receives the notice In the event of termination of this agreement for any reason, any fees held shall be applied to the outlays and services rendered by GMA up to the date of termination In the event of the application lapsing under Ch6 part 5, division 5 of the Sustainable Planning Act or s95 of the Act this contract will also lapse In the event of termination of this agreement for any reason, the Applicant must comply with the s144of the Act regarding notification of termination and appointment of replacement certifier. TERMS OF PAYMENT 8.1. Unless by prior arrangement, all fees are to be paid before the application will be processed Additional fees for re-inspections etc., are to paid prior to the inspection, unless by prior arrangement 8.3. Any Enforcement Action required to be imposed by any Act, Regulation or other statutory instrument will be charged on a cost recovery basis GMA and the applicant agree that time is of the essence for any payment stipulated hereunder, and any payments that are overdue shall attract an interest rate of 24% p.a. Signed for or on behalf of: APPLICANT:. Date:.././ GMA Certification Group Date:.././ BUILDING CERTIFIERS (Class A) G. Mitchell Lic No: A20976 S. Dillon Lic No: A J. Evans Lic No: A N. Redpath Lic No: A G. Iskov Lic No A D. Lindsay Lic No A F. O Cathain Lic No A R. Brittain Lic No A65318 D. Hegemann Lic No A R. Gorman Lic No A E. Dunn Lic No A J. Herbener Lic No: A C. Pomeroy Lic No: A Doc MD Version 5

9 IDAS form 1 Application details (Sustainable Planning Act 2009 version 4.3 effective 5 December 2016) This form must be used for ALL development applications. You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this form. For all development applications, you must: complete this form (IDAS form 1 Application details) complete any other forms relevant to your application provide any mandatory supporting information identified on the forms as being required to accompany your application. Attach extra pages if there is insufficient space on this form. All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable Planning Regulation This form and any other IDAS form relevant to your application must be used for development applications relating to strategic port land and Brisbane core port land under the Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act Whenever a planning scheme is mentioned, take it to mean land use plan for the strategic port land, Brisbane core port land or airport land. PLEASE NOTE: This form is not required to accompany requests for compliance assessment. Mandatory requirements Applicant details (Note: the applicant is the person responsible for making the application and need not be the owner of the land. The applicant is responsible for ensuring the information provided on all IDAS application forms is correct. Any development permit or preliminary approval that may be issued as a consequence of this application will be issued to the applicant.) Name/s (individual or company name in full) For companies, contact name Postal address Suburb State Country Postcode Contact phone number Mobile number (non-mandatory requirement) Fax number (non-mandatory requirement)

10 address (non-mandatory Applicant s reference number (non-mandatory requirement) 1. What is the nature of the development proposed and what type of approval is being sought? Table A Aspect 1 of the application (If there are additional aspects to the application please list in Table B Aspect 2.) a) What is the nature of the development? (Please only tick one box.) Material change of use Reconfiguring a lot Building work Operational work b) What is the approval type? (Please only tick one box.) Preliminary approval under s241 of SPA Preliminary approval under s241 and s242 of SPA Development permit c) Provide a brief description of the proposal, including use definition and number of buildings or structures where applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.) d) What is the level of assessment? (Please only tick one box.) Impact assessment Code assessment Table B Aspect 2 of the application (If there are additional aspects to the application please list in Table C Additional aspects of the application.) a) What is the nature of development? (Please only tick one box.) Material change of use Reconfiguring a lot Building work Operational work b) What is the approval type? (Please only tick one box.) Preliminary approval under s241 of SPA Preliminary approval under s241 and s242 of SPA Development permit c) Provide a brief description of the proposal, including use definition and number of buildings or structures where applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.) d) What is the level of assessment? Impact assessment Code assessment Table C Additional aspects of the application (If there are additional aspects to the application please list in a separate table on an extra page and attach to this form.) Refer attached schedule Not required IDAS form 1 Application details Version December 2016

11 2. Location of the premises (Complete Table D and/or Table E as applicable. Identify each lot in a separate row.) Table D Street address and lot on plan for the premises or street address and lot on plan for the land adjoining or adjacent to the premises (Note: this table is to be used for applications involving taking or interfering with water.) (Attach a separate schedule if there is insufficient space in this table.) Street address and lot on plan (All lots must be listed.) Street address and lot on plan for the land adjoining or adjacent to the premises (Appropriate for development in water but adjoining or adjacent to land, e.g. jetty, pontoon. All lots must be listed.) Street address Lot on plan description Local government area Lot Unit no. Street no. Street name and official suburb/ locality name Postcode Lot no. Plan type and plan no. (e.g. Logan, Cairns) i) ii) iii) Planning scheme details (If the premises involves multiple zones, clearly identify the relevant zone/s for each lot in a separate row in the below table. Non-mandatory) Lot Applicable zone / precinct Applicable local plan / precinct Applicable overlay/s i) ii) iii) Table E Premises coordinates (Appropriate for development in remote areas, over part of a lot or in water not adjoining or adjacent to land e.g. channel dredging in Moreton Bay.) (Attach a separate schedule if there is insufficient space in this table.) Coordinates (Note: place each set of coordinates in a separate row) Easting Northing Latitude Longitude Zone reference Datum 3. Total area of land on which the development is proposed (indicate square metres) GDA94 WGS84 other Local government area (if applicable) 4. Current use/s of the premises (e.g. vacant land, house, apartment building, cane farm etc.) IDAS form 1 Application details Version December 2016

12 5. Are there any current approvals (e.g. a preliminary approval) associated with this application? (Nonmandatory requirement) No Yes provide details below List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy) 6. Is owner s consent required for this application? (Refer to notes at the end of this form for more information.) No Yes complete either Table F, Table G or Table H as applicable Table F Name of owner/s of the land I/We, the above-mentioned owner/s of the land, consent to the making of this application. Signature of owner/s of the land Date Table G Name of owner/s of the land Table H The owner s written consent is attached or will be provided separately to the assessment manager. Name of owner/s of the land By making this application, I, the applicant, declare that the owner has given written consent to the making of the application. 7. Identify if any of the following apply to the premises (Tick applicable box/es.) Table I Adjacent to a water body, watercourse or aquifer (e.g. creek, river, lake, canal) complete Table I On strategic port land under the Transport Infrastructure Act 1994 complete Table J In a tidal water area complete Table K On Brisbane core port land under the Transport Infrastructure Act 1994 (No table requires completion.) On airport land under the Airport Assets (Restructuring and Disposal) Act 2008 (no table requires completion) Listed on either the Contaminated Land Register (CLR) or the Environmental Management Register (EMR) under the Environmental Protection Act 1994 (no table requires completion) Name of water body, watercourse or aquifer IDAS form 1 Application details Version December 2016

13 Table J Lot on plan description for strategic port land Port authority for the lot Table K Name of local government for the tidal area (if applicable) Port authority for the tidal area (if applicable) 8. Are there any existing easements on the premises? (e.g. for vehicular access, electricity, overland flow, water etc) No Yes ensure the type, location and dimension of each easement is included in the plans submitted 9. Does the proposal include new building work or operational work on the premises? (Including any services) No Yes ensure the nature, location and dimension of proposed works are included in plans submitted 10. Is the payment of a portable long service leave levy applicable to this application? (Refer to notes at the end of this form for more information.) No go to question 11 Yes 10a. Has the portable long service leave levy been paid? (Refer to notes at the end of this form for more information.) No Table L Yes complete Table L and submit, with this application, the local government/private certifier s copy of the accepted QLeave form Amount paid Date paid (dd/mm/yy) QLeave project number (6 digit number starting with A, B, E, L, P or S) 11. Has the local government agreed to apply a superseded planning scheme to this application under section 96 of the Sustainable Planning Act 2009? No Yes please provide details below Name of local government Date of written notice given by local government (dd/mm/yy) Reference number of written notice given by local government (if applicable) IDAS form 1 Application details Version December 2016

14 12. List below all of the forms and supporting information that accompany this application (Include all IDAS forms, checklists, mandatory supporting information etc. that will be submitted as part of this application) Description of attachment or title of attachment Method of lodgement to assessment manager 13. Applicant s declaration By making this application, I declare that all information in this application is true and correct (Note: it is unlawful to provide false or misleading information) Notes for completing this form Section 261 of the Sustainable Planning Act 2009 prescribes when an application is a properly-made application. Note, the assessment manager has discretion to accept an application as properly made despite any noncompliance with the requirement to provide mandatory supporting information under section 260(1)(c) of the Sustainable Planning Act 2009 Applicant details Where the applicant is not a natural person, ensure the applicant entity is a real legal entity. Question 1 Schedule 3 of the Sustainable Planning Regulation 2009 identifies assessable development and the type of assessment. Where schedule 3 identifies assessable development as various aspects of development the applicant must identify each aspect of the development on Tables A, B and C respectively and as required. Question 6 Section 263 of the Sustainable Planning Act 2009 sets out when the consent of the owner of the land is required for an application. Section 260(1)(e) of the Sustainable Planning Act 2009 provides that if the owner s consent is required under section 263, then an application must contain, or be accompanied by, the written consent of the owner, or include a declaration by the applicant that the owner has given written consent to the making of the application. If a development application relates to a state resource, the application is not required to be supported by evidence of an allocation or entitlement to a state resource. However, where the state is the owner of the subject land, the written consent of the state, as landowner, may be required. Allocation or entitlement to the state resource is a separate process and will need to be obtained before development commences. Question 7 If the premises is listed on either the Contaminated Land Register (CLR) or the Environmental Management Register (EMR) under the Environmental Protection Act 1994 it may be necessary to seek compliance assessment. Schedule 18 of the Sustainable Planning Regulation 2009 identifies where compliance assessment is required. Question 10 The Building and Construction Industry (Portable Long Service Leave) Act 1991 prescribes when the portable long service leave levy is payable. The portable long service leave levy amount and other prescribed percentages and rates for calculating the levy are prescribed in the Building and Construction Industry (Portable Long Service Leave) Regulation IDAS form 1 Application details Version December 2016

15 Question 10a The portable long service leave levy need not be paid when the application is made, but the Building and Construction Industry (Portable Long Service Leave) Act 1991 requires the levy to be paid before a development permit is issued. Building and construction industry notification and payment forms can be completed on the QLeave website at For further information contact QLeave on Privacy The information collected in this form will be used by the Department of Infrastructure, Local Government and Planning (DILGP), assessment manager, referral agency and/or building certifier in accordance with the processing and assessment of your application. Your personal details should not be disclosed for a purpose outside of the IDAS process or the provisions about public access to planning and development information in the Sustainable Planning Act 2009, except where required by legislation (including the Right to Information Act 2009) or as required by Parliament. This information may be stored in relevant databases. The information collected will be retained as required by the Public Records Act OFFICE USE ONLY Date received Reference numbers NOTIFICATION OF ENGAGEMENT OF A PRIVATE CERTIFIER To Council. I have been engaged as the private certifier for the building work referred to in this application Date of engagement Name BSA Certification license number Building classification/s QLEAVE NOTIFICATION AND PAYMENT (For completion by assessment manager or private certifier if applicable.) Description of the work QLeave project number Amount paid ($) Date paid Date receipted form sighted by assessment manager Name of officer who sighted the form The Sustainable Planning Act 2009 is administered by the Department of Infrastructure, Local Government and Planning. This form and all other required application materials should be sent to your assessment manager and any referral agency. IDAS form 1 Application details Version December 2016

16

17

18

19

20 GMA Certification Group BUILDING SURVEYORS ACN Queensland s leaders in Building Certification Services Ph: Fax: admin@gmacert.com.au Energy Efficiency Supplementary Information Form Applicant Details: BA 20 / BCA Zone Site Details : Lot RP/ SP: Address: Qld Please provide the following information in order for an energy efficiency assessment to be completed on the proposed project. As of the 1 st May 2010 a minimum requirement of 6 Stars MUST be achieved for new houses and townhouse buildings (class 1) and sole occupancy units (class 4). Non-residential buildings (classes 3 and 5-9) are required to comply with Section J of the BCA 2010 Volume 1. Walls External Walls Materials Brick Veneer Timber Cladding Fibre Cement Sheet Metal Block work AAC (Hebel) ESP Board Other Combination of... Single Storey Double Storey 2.4 m m 2.7 m 3.0m Other:.. External Walls Insulation None Reflective Foil Reflective Bubble Foil Bulk Insulation ESP Board Other (Please specify). R-Rating... External Wall Colour Light Medium Dark Internal Walls Insulation None Bulk Insulation - Rating. All walls Walls to. only Floors Construction Slab on Ground Waffle Pod Suspended Timber Other.. Floor Coverings Kitchen, Living Area / Others Tiles Vinyl Carpet Cork, Parquetry Laminate Polished Concrete N/A Bedrooms Tiles Vinyl Carpet Cork, Parquetry Laminate Polished Concrete N/A Wet Areas Tiles Vinyl Carpet Cork, Parquetry Laminate Polished Concrete N/A Ceiling Insulation None Other (Please specify)...r-rating... Reflective Foil Reflective Bubble Foil Reflective Backed Bulk Bulk Insulation GMA Energy Supp Info V1-16

21 Roof Material Tile Sheet Metal Shingles EPS Colour Light Medium Dark Construction type & Slope Other.. Hip Gable Hip & Gable Skillion Other.. Insulation None Reflective Foil Reflective Bubble Foil Reflective Backed Bulk Bulk Insulation Other (Please specify)...r-rating... Window & Skylights Window frames Aluminium Timber PVC - Manufacturer Type Single Glazed Double Glazed Glass Clear Tinted Low- E Window Furnishings None Curtains Drapes Holland Blinds Vertical Blinds Pelmets External Shading None Lattice Awning Louvers Privacy Screens Sky/Roof Lights None Yes Number and locations.. Ceiling Penetrations and Ventilation Ceiling fans, down lights and exhaust fans if not shown on electrical layout. Down Lights Total number. None Kit/living Area:.. Living Areas:. Bedrooms:.. Study/Media: Ceiling Fans Total number. None Kit/living Area Living Areas Bedrooms Study/Media Outdoor Living Area Exhaust Fans Total number. None En-suite Bathroom WC Powder Kitchen Laundry Air-Conditioning None Kit/living Area Living Areas Study/Media Bedrooms Fully Ducted System Note: Ceiling Fans may still be required even if air-conditioning is proposed and when air-conditioning is installed external doors and windows will require seals. Miscellaneous Eaves 300mm 450mm 600mm 900mm Varies Roof Vents None Number.. Location. Solar Power Panels No Yes..Size of Solar power system kw (If you intend to install solar panels a 1 Star QDC MP 4.1credit is rewarded for a solar photovoltaic (PV) system with a minimum of 1.0 kilowatt capacity Class 1 Buildings in Climate zones 1, 2, 3, & 5 only) Outdoor Living Areas (Class 1 Buildings Climate zones 1, 2, 3 & 5 only) A 0.5 Star credit is rewarded for an outdoor living area that has a minimum area of 12m ² and minimum dimensions in all directions of 2.5m is covered with at least two openable sides and includes R1.5 Insulation for downward heat flow. An extra 0.5 Star credit is rewarded if a permanently installed ceiling fan with a speed controller and blade rotation diameter of not less than 900mm. GMA Energy Supp Info V1-16

22

23