SECUNDA - BAGGING LINE SPARES (RE-TENDER) SE

Tender Sale SECUNDA - BAGGING LINE SPARES (RE-TENDER) SE 09-503-17 SASOL - REDUNDANT MATERIALS MANAGEMENT (SECUNDA) 456 JAN VAN RIEBEECK STREET, PRETORIA NORTH, PRETORIA * PO BOX 911-2461, ROSSLYN, 0200 TEL: +27 +12 546 8409 / 11 FAX: 086 696 5471 / 086 558 5030 / 086 558 4185 CELL: PRETORIA-NORTH: 082 578 5324, MEYERTON: 072 959 8453, SECUNDA: 079 716 1545, SASOLBURG: 079 195 8551 EMAIL: info@ryncor.com Visit our website @ www.ryncor.com

Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER GENERAL TERMS AND CONDITIONS AND TENDER FORM, FOR TENDER SALE ON BEHALF OF SASOL SE 09-503-17 PROCESS FOR TENDER SALE: 1. Read the terms and conditions and familiarize yourself with the contents. Sign pages 1 to 3 of the terms and conditions and fax or e-mail with the completed tender document. It can also be placed in a tender box situated in Pretoria, Secunda, Sasolburg or Meyerton. 2. Please note: An additional administration fee of R969,00 will be charged on the sale of all vehicles. 3. Approximately 5 working days after the tender sale has closed a sms will be sent to successful Bidders or Tenderers indicating whether your tender was successful. Please ensure that your contact details are complete, correct and legible. 4. All successful Bidders or Tenderers will receive a Pro-Forma invoice via fax or e-mail with all the successful bids. See paragraph 6 for bank details. 5. After payment is cleared you will receive a Release Note with details for the removal of sold items. 6. Please note that a copy of the ID document and proof of residence is compulsory for bidding on every tender submitted!! 7. Please note that a valid TV license is compulsory for bidding on any TV set!! 456 JAN VAN RIEBEECK STREET, PRETORIA NORTH, PRETORIA * PO BOX 911-2461, ROSSLYN, 0200 TEL: +27 +12 546 8409 / 11 FAX: 086 696 5471 / 086 558 5030 / 086 558 4185 CELL: PRETORIA-NORTH: 082 578 5324, MEYERTON: 072 959 8453, SECUNDA: 079 716 1545, SASOLBURG: 079 195 8551 EMAIL: info@ryncor.com Visit our website @ www.ryncor.com

Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER GENERAL TERMS AND CONDITIONS AND TENDER FORM, FOR TENDER SALE ON BEHALF OF SASOL SE 09-503-17 By bidding for any items included in the sale the bidder confirms that he accepts and is bound by the following terms and conditions: 1. Bids must be sent to Ryncor Auctioneers, on or before 11 November 2016 at 12:00 pm. Bids must be sent by fax to 086 696 5471 / 086 558 4185 / 086 558 5030, or by post to Ryncor Auctioneers, P.O. Box 911-2461, Rosslyn, 0200 or by e-mail to : info@ryncor.com or tender box. Important Notice:- The Bidder is responsible to ensure/confirm, that all bids submitted electronically/ by post/by fax/hand delivered in Tender Box, have actually been received by Ryncor, for inclusion in the Tender Sale process! 2. The Seller is the sole owner of these goods. Ryncor Auctioneers acts as an agent for and on behalf of the Seller and does not have any rights title or interest in the ownership of these goods and does not accept any liability to any third party with regard to these goods. 3. A Tender Sale is a private treaty sale in which the Seller reserves the right to refuse an offer at any time without any justification or explanation. The Seller reserves the right to merge or split some lots and to withdraw items from the sale. * Ryncor reserves the right not to accept the highest bid or any other bid! * Ryncor reserves the right to negotiate with the Buyer a better price if the Seller rejects the highest bid. * The negotiated price shall not be less than the highest bid received on auction/tender 4. The Seller reserves the right to withhold delivery of items to any successful bidder until full payment is received. 5. Buyers will take full responsibility for the items as soon as final payment is received by Ryncor Auctioneers. 6. After awarding of the winning bid(s), the purchase price plus 5% Buyers commission and VAT applicable of 14%, must be transferred within 48 hours to Ryncor Auctioneer's bank account: Bank: ABSA Branch: Pretoria North Branch code: 509-145 Account Number: 4053081330 Please state your reference number (Example: TEN 001) as shown on the Pro-Forma Invoice on all payments made to this account and fax proof of payment to 086 696 5471 / +27 (12) 546 8410. All cash deposits including ATM cash deposits into this account are subject to a "Cash Deposit Fee" of R1.60 per R100.00 6.1 If invoices are being paid by cheque or bank guarantee cheque, there will be a 10 day waiting period before the collection of the items can proceed. In terms of the Ryncor Standard Terms & Conditions, we hereby officially inform you that should the registration Fee not be paid by latest on the Tender Sale closing date, your bid will be disqualified and will not be considered for the commodities you have submitted bids for! Tender documents are processed every Monday after the closing date of the Tender Sale, and non payment/receipt of the Registration Fee will automatically disqualify the bidder! Please make every effort to adhere to this rule, to avoid any disappointment. 7. Foreign Buyers will be refunded for the VAT after receipt of the original exportation documentation properly stamped to prove that the export has been carried out. 8. Should the Buyer fail to proceed to pay in full within 48 hours or cancel his bid, Ryncor Auctioneers will be entitled to a penalty fee amounting to 20% of the bid amount from the Buyer, as compansation for admin costs. Important Notice :- If financing is arranged through a Financial Institution, it must be noted that the required evaluation/approval/inspection of the commodity being purchased from Sasol, be done beforehand and on site Sasol RMM. No commodity will be allowed to leave Sasol's premises until paid in full! SIGNED. DATE

Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER 9. Once payment reflects in the Ryncor bank account, the Buyer will receive a release Note within 48 hours. The Buyer then has ten (10) working days after the payment date to collect/remove his purchased goods from the premises. Failure to collect/remove the purchased items/vehicles within ten(10) working days will result in the items/vehicles being sold on a new Tender Sale, to recover Admin/storage fees. Any remaining proceeds from this sale will be reimbursed to the Buyer. Collection should be arranged with the Site one day in advance to allow arrangements for booking at Security collection times and days: * Monday to Thursday 7am to 3pm; however arrival times for large items involving cranes and major loading procedures is NO later than 1pm. * Late arrivals will not be accommodated and turned away * No collections on Fridays 10. If it appears that an item cannot be delivered, totally or partially, by the Seller, for any reason whatsoever, Ryncor Auctioneers will be authorized to declare the sale null and void, after which Ryncor Auctioneers and/or the Seller will reimburse payments to the Buyer, but will not be liable to pay any damages to the Buyer. 11. The items (complete and/or parts) are sold as is, where is, with no guarantee as regards to condition including any hidden flaws. In any event, the Buyer will be deemed to have carefully inspected the items he purchases beforehand. The Buyer will be deemed competent and to have been informed, before the closing date for biddings, of any error in the descriptions as well as any flaws or imperfections of the items. 12. The Seller shall not be liable for any damage to the Buyer s professional property, resulting from any flaws in the items. 13. Collection/dismantling of the items sold will be entirely at the buyer s cost and under his responsibility. Neither the Seller nor Ryncor Auctioneers shall be liable to the Buyer or any third party for additional costs due to the removal of the Items/vehicle from the Sasol premises. The Buyer shall be liable for any accident, damage to persons, to buildings or to the third party s property during dismantling and/or collection. No responsibility whatsoever can be accepted with regards to the condition, description, quality, dimensions, and year of manufacture and completeness of the items as shown in the catalogue. Note : * Contact our office on telephone Pretoria-North: 012-546-8409/11, Meyerton: 016-365-6773/8, Sasolburg: 016-960-2992, Secunda: 017-610-1606 to get details of Sasol approved Contractors. * Only roadworthy and licensed vehicles will be allowed on Sasol's premises. * No children, firearms or alcohol are allowed on the Sasol premises. * No Cameras, or Cellphone's for the taking of photo's are allowed on the Sasol premises. * The removal must be arranged in it's totality by the Buyer with no safety risk to Sasol. * All goods may only be removed from Monday to Thursday and from 7:30-15:00 and Friday 7:30-12:00 at Pretoria-North, Sasolburg and Meyerton. Secunda goods may only be removed from Monday till Thursday from 7:30-14:00. 14. The Seller is solely responsible for the correctness and clarity of the details and descriptions included in the Tender Sale documentation/catalogue. 15. Pictures of the items shown in the Tender Sale documents/sales catalogue or sales lists are provided for the sole purpose of better differentiation and under no circumstances do they represent properties or characteristics of the items for sale. 16 Removal of the goods from the site shall be the responsibility of the Buyer, who shall remove the goods not later than ten (10) working days from the invoice date, having made prior arrangements to do so with Ryncor Auctioneers. The Buyer will be responsible for obtaining at his own expense, all necessary equipment for the removal of the Goods. Where the Vendor gives assistance to the Buyer in connection with such removal, such assistance is given entirely at the Buyer's risk. Should items not be removed within the specified time frame, then Ryncor Auctioneers reserves the right to resell or dispose of the items without incurring any liability to the Buyer, or without prejudice claims of the Vendor or Auctioneer against the Buyer for breach of contract. The Buyer's also forfeits any deposit paid to Ryncor Auctioneers. Ryncor Auctioneers also reserves the right to charge the Buyer rent and costs incurred due to non-removal of lots. The Buyer will be responsible for all damages caused to the building, plant and machinery or other lots, be it caused by the Buyer or any appointed contractor. SIGNED. DATE

Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER 17 The Buyer declares to be duly entitled to sign and purchase the items on behalf of his company/cc/trust and agrees with the abovementioned general conditions of sale by Tender. 18 Please note: An additional administration fee of R969,00 will be charged on the sale of all vehicles. A copy of the ID document and proof of residence is mandatory for bidding on any vehicle!! 19 The above mentioned items will be sold as "SCRAP". The items are hereby sold to the Buyer as ("voetstoots, as is, where is") and Ryncor Auctioneers do not guarantee in any manner the quality and usefulness of the Items, except that when properly used it will not create a risk to health, nor shall Ryncor Auctioneers be responsible for any defects latent or patent or any damages resulting there from, and the Buyer hereby agrees to accept the items as they are with all their defects. 20 When doing a site visit to view the Goods up for a Tender Sale, the prospective Buyer must ensure he arranges to be booked in by a Sasol Supply chain Services Redundant Materials Management employee the day prior to his visit on ; Tel no: 017-610-1606 (Secunda), Tel no: 016-960-2992 (Sasolburg) and Tel no: 016-365-6773 (Meyerton). Important note :- A bar coded ID document and the correct PPE wear is also required. Visitors/Contractors are required to view a safety video at the Sasol Security Offices 20.1 The SA Immigration Act. has strict requirements for any Other Country National (OCN)' that plan to visit South Africa. In order to operate within the parameters of the law it is critical to ensure that access to Sasol premises is aligned with the relevant legal requirements outlined in the Act. Therefore all OCN individuals must notify SASOL RMM/RYNCOR 72 hours (working hours) before intending to visit the Sasol site and send a copy of the valid passport and work permit / business endorsements in order to ensure compliance, alignment and easy access to Sasol premises. 21. The Buyer hereby, in terms of Section 10 of the Occupational Health and Safety Act, No 85 of 1993, undertakes in writing or by signing of a Letter of Award to take all the necessary steps to ensure, as far as it is reasonably practical, that the items purchased will be used in a safe manner for what they are designed for and without risks to health when properly used and that it complies with the prescribed requirements. The undertaking shall have the effect of relinquish Ryncor Auctioneers and Sasol Shared Services the duty imposed upon them by this Section 10 to such an extent as may be reasonable having regard to the terms of the undertaking. 22. The Buyer further undertakes to abide by all internal SHE (Safety, Health & Environmental) prescriptions of the Seller (Company) inclusive of requirements for the safe decommissioning, dismantling, upliftment/rigging, loading and transportation of the purchased commodities. Depending of the nature and size of the purchased item, a comprehensive Environmental Management Plan (EMP) could be required. (This aspect to be discussed by the prospective Buyer when submitting his bid) 23. The rules of this Tender Sale comply with section 45 of the Consumer Protection Act, 68 of 2008 ("the Act") and the regulations thereto. Any person attending the Tender Sale to bid on behalf of another person must produce a letter of authority wich meets the requirements of regulation 32(3) of the regulations to the Act. Any person bidding on behalf of a company must produce a letter of authority on the letterhead of the company as well as a certified copy of a resolution authorising him or her to bid. All persons intending to bid must register prior to the Tender Sale and must provide a copy of their identity documents and proof of residence. 24. The Buyer shall indemnify and keep Ryncor Auctioneers/Sasol indemnified against all losses for death or injury to its employees, its contractors and / or its contractors losses for death or injury to its employees, its contractors and / or its contractors personnel and / or death or injury or damage to health of third parties or damage to anything attributable to this sales transaction, and against all claims, demands, proceedings, costs, charges and expenses arising in connection with this sale agreement. Important Notice :- For the removal of equipment/structures/plant facilities from any Sasol BU/Plant or Mine area, the successful Bidder must enter into a Memorandum of Agreement with Sasol. All successful bidders for TV sets must furnish Ryncor with a copy of his/her valid TV license before the Release Note for removing the set will be issued! SIGNED. DATE 456 JAN VAN RIEBEECK STREET, PRETORIA NORTH, PRETORIA * PO BOX 911-2461, ROSSLYN, 0200 TEL: +27 +12 546 8409 / 11 FAX: 086 696 5471 / 086 558 5030 / 086 558 4185 CELL: PRETORIA-NORTH: 082 578 5324, MEYERTON: 072 959 8453, SECUNDA: 079 716 1545, SASOLBURG: 079 195 8551 EMAIL: info@ryncor.com Visit our website @ www.ryncor.com

INDEMNITY In favour of Ryncor Auctioneers cc (hereinafter referred to as Ryncor ) I, the undersigned,, ID Of (Address) hereby agree as follows: WHEREAS Ryncor has the intention to sell articles to me, on behalf of the Seller, on the following auction/tender provided my bid is the highest: Tender number: SE 09-503-17 (hereinafter referred to as the article/s ) AND WHEREAS I intend to purchase the article s from Ryncor and bid a purchase price in consideration for the article/s; NOW THEREFORE: 1 I acknowledge that the article/s is/are sold voetstoots/coa/as per MSDS without any warranties, whether express or implied and Ryncor shall not be liable for any defects whether patent, latent or otherwise in the article/s nor for any damages suffered by me by reason of such defects. 2 I will not have any claim whatsoever against Ryncor for any deficiency in the article/s which may be revealed after the purchase thereof. 3 I acknowledge that I am aware of the meaning of the expression voetstoots, as is, where is /COA-Certificate Of Analysis/as per MSDS-Material Safety Data Sheet 4 Ryncor and/or Ryncor employees shall not be liable for any loss and/or damage of whatsoever nature and howsoever caused, including any damage caused by the negligence of Ryncor, any Ryncor employee and/or any other person, suffered by me (to my person or property) as a result, directly or indirectly of the purchase and sale of the article/s and Ryncor and/or any Ryncor employee shall not be liable for any consequential indirect loss and/or damage arising there from. 5 I hereby indemnify and hold Ryncor and any Ryncor employee harmless against all liabilities, claims, losses and damage of whatsoever nature and howsoever caused which Ryncor and/or any Ryncor employee and/ or any other person may sustain as a result, directly or indirectly, of the purchase and sale of the article/s. 6 I acknowledge that the articles are sold as redundant material and I hereby undertake the following: 6.1 I shall not use the articles or any part or component thereof for any purpose which renders such use illegal or unsuitable; 6.2 In the event that I require refurbishment of the articles I shall take all the required steps in order to ensure that the refurbishment complies fully with the provisions of the Occupational Health and Safety Act, No 85 of 1993 (The OHS Act ); 6.3 I shall procure the necessary certification by a competent or accredited person or institution for such purpose verifying that the refurbishment complies with the provisions of the OHS Act. 7 In the event of bidding on a vehicle, with the intention to buy the vehicle, I acknowledge the following additional points: 7.1 Before buying/bidding on the vehicle/s, I have been informed on the tender/auction document of the Vehicle s roadworthy status, (not registered, deregistered, scrapped or dealerstock). I further understand that all information rendered to me on the vehicle is done in good faith, and that Ryncor cannot be held liable for anything said or implied on the general condition. I accept the status of the registration document and understand the proses to be followed by myself or the company I m bidding for, to get the vehicle/s. 7.2 I take full responsibility for the registration of any one or more of the vehicles bought by me should I wish to do so, and/or to obtain certificates of roadworthiness and that I am responsible to take all steps necessary in this regard and to carry all costs associated with registering any one or more of the vehicles and/or obtaining certificates of roadworthiness for the vehicle/s, including any costs incurred to get the vehicle/s in a roadworthy condition and that I will not require any assistance from RYNCOR in this regard ; 7.3 I buy the vehicle/s listed above voetstoots and entirely at my own risk or at the risk of the company I m bidding for and that no warranty or representations whatsoever have been made in respect of the vehicle/s by RYNCOR 7.4 I and/or the company I m bidding for, hereby indemnify RYNCOR and holds RYNCOR harmless against all claims, liabilities, costs, expenses, damages, compensation and losses [including any direct, indirect or consequential losses, loss of profit, loss of reputation and all interest, penalties and legal and attorneys fees as between attorney and client and claims by my dependants /directors, employees, agents or representatives) arising out of or in connection with death, personal injury, sickness, disease, damage to or loss of property suffered by myself or any one of my dependants or by the company I m bidding for, or any one of its directors, employees, agents or representatives and arising out of or in connection with the sale of the vehicle/s. This indemnity shall be applicable to all agents, representatives, directors, employees and principals of Ryncor Auctioneers SIGNED AT: ON THIS: DAY OF: DR/MR/MS: SIGNATURE: CONTACT NUMBER: WITNESS:

Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER TENDER FORM Declaration of agreement by the undersigned with the general terms and conditions of this tender sale. I/We, the undersigned, hereby submit to you the the following irrevocable bid(s), without any restrictions according to the general terms and conditions of this tender sale by this, to purchase the materials as follows: * PLEASE COMPLETE ALL THE REQUESTED FIELDS BELOW IN CAPITAL LETTERS TO PREVENT BID CANCELLATION NAME OF COMPANY: NAME OF SIGNATORY: VAT REGISTRATION NUMBER: ID NUMBER AND COPY OF ID DOCUMENT: PHYSICAL ADDRESS: POSTAL ADDRESS: CODE: COUNTRY: TELEPHONE NUMBER (BUSINESS HOURS): MOBILE TELEPHONE NUMBER: FAX NUMBER: E-MAIL ADDRESS: SIGNATURE: COMPANY STAMP: DATE: TIME: PLACE: 456 JAN VAN RIEBEECK STREET, PRETORIA NORTH, PRETORIA * PO BOX 911-2461, ROSSLYN, 0200 TEL: +27 +12 546 8409 / 11 FAX: 086 696 5471 / 086 558 5030 / 086 558 4185 CELL: PRETORIA-NORTH: 082 578 5324, MEYERTON: 072 959 8453, SECUNDA: 079 716 1545, SASOLBURG: 079 195 8551 EMAIL: info@ryncor.com

8 Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER TENDER ITEMS LOT NO BUN NO. DESCRIPTION REG NO AMOUNT LOT SE001 SE/SRPPOL/0025/17 SHAFT; TYPE DRIVE; DRIVEN CHAIN CONVEYOR FOR 2 PALLETS LOADS; (5 Off) SIZE: DIA 50 X LG 1045MM ; Mnfr: MOLLERS GMBH, Mnfr Drg: DFZ 01031Z 4G REV 0 Item 13, SPIR: PP2/2032, Equipment Model No: DRIVEN CHAIN CONVEYOR, Tag No / Technical ID: PP2 Z541 A/B Z9, Equipment Serial No: 17 925 3 7 ERP nr:12206002653 LOT SE002 SE/SRPPOL/0026/17 ROLLER; TYPE DRAW ROLLER; Mnfr Part No: 73263754 (1 Off) Mnfr Drg: 7331210100 Rev 0 Item 1ERP nr:12206002867 LOT SE003 SE/SRPPOL/0027/17 DRUM; TYPE TENSION; FOR FLAT BELT CONVEYOR (3 Off) ASCENDING/HORIZONTAL (TENSION STATION), MOLLERS MAIN COMM: M-17925-TBM-030 ; Mnfr: MOLLERS GMBH, Mnfr Drg: DTF-30111Z-4J Rev 0 Item 3, Tag No / Technical ID: PP2-PK-541 A-Z7ERP nr:12206002591 LOT SE004 SE/SRPPOL/0028/17 SHAFT; Mnfr Part No: 72233567 (1 Off) Mnfr Drg: 7331040101 REV 0 Item 12ERP nr:12206002805 LOT SE005 SE/SRPPOL/0029/17 BARRIER; TYPE SAFETY; Suppl Part No: 417833ERP nr:10107903329 (5 Off) LOT SE006 SE/SRPPOL/0030/17 WHEEL; TYPE WORM; UPPER BAG FLATTENER (2 Off) Mnfr Part No: 101943 Mnfr: MOLLERS GMBH, Mnfr Drg: DTF 54001Z 4F Rev 0 Item 5, Equipment Model No: UPPER BAG FLATTENER, Equipment Serial No: 17 925 3 2 Nr:12206002595 LOT SE007 SE/SRPPOL/0031/17 MOTOR; FOR BAG PREPARING AND RUNING CONVEYOR (2 Off) Mnfr: MOLLERS GMBH, Mnfr Drg: DPZ-41003Z-4B/C Rev 0 Item 1.1ERP nr:15301602078 LOT SE008 SE/SRPPOL/0032/17 MOTOR, BRAKE; POWER 0.37 KW, SPEED 22 RPM; CHAIN CONVEYOR (1 Off) TURNABLE R 1100MM, LOCAL SUPPLIER : M C BEARING ; Mnfr Part No: S57 DT71 D4 BMG Z Mnfr: SEW EURODRIVE (PTY) LTD, Mnfr Drg: DFZ 01405Z 4C Rev 0 Item 55.1.1, Equipment Model No: CHAIN CONVEYOR TURNABLE, Equipment Serial No: 17 925 5 4ERP nr:15301602069 LOT SE009 SE/SRPPOL/0033/17 MOTOR, BRAKE; SPEED 76 RPM; FOR EMPTY PALLET MAGAZINE,(2 Off) TYPE;HELICAL WORM GEARED. LOCAL SUPPLIER : M C BEARINGS ; Mnfr Part No: SA37 TD71 D4 BMG NV12 Mnfr: SEW EURODRIVE (PTY) LTD, Mnfr Drg: DPZ-17784Z-4A Rev 0 Item 11.1.1, Equipment Serial No: 17.925-3.5ERP nr:15301602046 LOT SE010 SE/SRPPOL/0034/17 DETECTOR; TYPE HEAD DESIGN; FOR METAL DETECTOR(1 Off) Mnfr Part No: 350007 Mnfr: MOLLERS MACHINENFABRIK GMBH, Mnfr Drg: 96 000.00.85 EOX Rev 0 Item 1ERP nr:10109502915 LOT SE011 SE/SRPPOL/0035/17 MOTOR, BRAKE; POWER 4 KW, SPEED 74 RPM; DRIVEN CHAIN CONVEYOR (1 Off) FOR 2 PALLETS LOADS. LOCAL SUPPLIER : M C BEARINGS ; Mnfr Part No: R87 DV112 M4 BMG Mnfr: SEW EURODRIVE (PTY) LTD, Mnfr Drg: DFZ 0103Z 4G Rev 0 Item 1.1, Equipment Model No: DRIVEN CHAIN CONVEROR FOR 2 PA, Equipment Serial No: 17 925 3 7ERP nr:15301602076 LOT SE012 SE/SRPPOL/0036/17 SHAFT; TYPE DRIVE; FOR PALLETIZER SLIDING PLATETS (1 Off) Mnfr Part No: PLS C2 2000 Mnfr: MOLLERS GMBHERP ERP nr:12203100033 Hereby I/we confirm that I/we have read and understand the terms and conditions of this tender sale. Signature

9 Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER TENDER ITEMS LOT NO BUN NO. DESCRIPTION REG NO AMOUNT LOT SE013 SE/SRPPOL/0037/17 BEARING, SLEEVE; TYPE TAPER; COMPLETE FOR BEARING 2218 K/C3 (6 Off) Mnfr Part No: H318 Mnfr: FAG BEARING, SPIR: PP2/2032ERP nr:10203002279 LOT SE014 SE/SRPPOL/0038/17 BEARING; ARM ; Mnfr Part No: 03436638 (2 Off) Mnfr Drg: 7331091003 Rev 0 Item 4, SPIR: PP2/2032AERP nr:10201702018 LOT SE015 SE/SRPPOL/0039/17 DISPLAY UNIT; FOR METAL DETECTOR (1 Off) Mnfr Part No: 350019 Mnfr: MOLLERS MACHINENFABRIK GMBH, Mnfr Drg: 96 000.00.85 EOX REV 0 Item 3ERP nr:10109502917 LOT SE016 SE/SRPPOL/0040/17 CARD, COMPUTER; TYPE ELECTRONIC; FOR METAL DETECTOR (3 Off) Mnfr Part No: 704076 Mnfr: MOLLERS MACHINENFABRIK GMBH, Mnfr Drg: 96.00.0085 EOX.0 Rev 0 Item 2, Reference No: MAIN COM. NO 17925ERP nr:10109503165 LOT SE017 SE/SRPPOL/0041/17 MODULE; FOR BAG PREPARING AND TURNING CONVEYOR,(1 Off) TYPE;SERVO AXLE ; Mnfr Part No: 112104 Mnfr: MOLLERS GMBH, Mnfr Drg: DPZ-41003Z-4B/C Rev 0 Item 1.7ERP nr:10109503135 LOT SE018 SE/SRPPOL/0042/17 FLAP; TYPE DOUBLE FLAP BOTTOM; EQUIPMENT- BAGGING MACHINE(4 Off) PART- BEC 60 ; Mnfr Part No: 7080-A11.02 Mnfr Drg: 88.51.01-02 REV 0, Reference No: SR 23422, Tag No / Technical ID: PP1- A731, Equipment Serial No: 35889, Machine Model No: DIAMANT 7330ERP nr:12203102743 LOT SE019 SE/SRPPOL/0043/17 IDLER; MATERIAL STEEL; FOR ACCUMULATION ROLLER CONVEYOR,(10 Off) POS 34 ; Mnfr Part No: 105814 Mnfr: MOLLERS MACHINENFABRIK GMBH, Mnfr Drg: DPZ-31101Z-4C Rev 0 Item 1ERP nr:12206002213 LOT SE020 SE/SRPPOL/0044/17 ROLLER; TYPE IDLER; Mnfr Part No: 02020128 (1 Off) Mnfr Drg: 7331281101 Rev 0 Item 18ERP nr:12206002932 LOT SE021 SE/SRPPOL/0045/17 BELT, TOOTHED; LENGTH 7.68 M, MATERIAL RUBBER(1 Off) FOR PLS-PALLETIZER INFEEDER FRAME, POS 12, WD 40MM ; Mnfr Part No: 108024 Mnfr: MOLLERS MACHINENFABRIK GMBH, Mnfr Drg: DPL-75000Z-4C REV 0 Item 4ERP nr:10500102082 LOT SE022 SE/SRPPOL/0046/17 PLATE; Mnfr Part No: 75823351 (10 Off) Mnfr: WINDMOELLER & HOELSCHER CORPERP nr:12206002964 LOT SE023 SE/SRPPOL/0047/17 CYLINDER; TYPE PNEUMATIC; FOR PALLET STACK CONVEYOR-ROLLER (3 Off) CONVEYOR WITH EMPTY PALLET PUSHER ; Mnfr Part No: 106525 Mnfr: MOLLERS GMBH, Mnfr Drg: DPZ-17818Z-4A Rev 0 Item 30.1.1, Equipment Serial No: 17.925-3.5RP nr:12206002632 LOT SE024 SE/SRPPOL/0048/17 CONTROLLER; TYPE SAFETY ELECTRONIC UNIT FOR PHOTOCELL(1 Off) Mnfr Part No: MSLVA-8K Mnfr: VISOLUX, Reference No: MOLLERS PALLETIZER, SR 0143, Tag No / Technical ID: PP1- A740 Nr: 10109702189 LOT SE025 SE/SRPPOL/0049/17 THERMOCOUPLE; DESIGN LENGTH 6000 MM; Mnfr Part No: 04800123 (1 Off) Reference No: SR23454, Tag No / Technical ID: PP1- A731ERP nr:10109502580 Hereby I/we confirm that I/we have read and understand the terms and conditions of this tender sale. Signature

10 Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER TENDER ITEMS LOT NO BUN NO. DESCRIPTION REG NO AMOUNT LOT SE026 SE/SRPPOL/0050/17 BLOCK; AUTOMATIC LIFTING DEVICE FOR UNDERSHRINK (1 Off) Mnfr Part No: 106585 Mnfr: MOLLERS GMBH, Mnfr Drg: DFZ 06110Z 4F Rev 0 Item 100, Equipment Model No: AUTOMATIC LIFTING DEVICE, Equipment Serial No: 17 925 4 4 2ERP nr:12206002693 LOT SE027 SE/SRPPOL/0051/17 HEAD; FORK FOR SHRINKWRAPPING MACHINE FSA FRAME (2 Off) Mnfr Part No: 701592 Mnfr: MOLLERS GMBH, Mnfr Drg: DFS 11001Z 4K Rev 0 Item 28, Equipment Model No: SHRINKWRAPPING MACHINE FSA, Equipment Serial No: 17 925 4 2ERP nr:12206002666 LOT SE028 SE/SRPPOL/0052/17 HEAD; FORK FOR SHRINKWRAPPING MACHINE FSA FRAME(2 Off) Mnfr Part No: 701591 Mnfr: MOLLERS GMBH, Mnfr Drg: DFS 11001Z 4K Rev 0 Item 27, Equipment Model No: SHRINKWRAPPING MACHINE FSA, Equipment Serial No: 17 925 4 2ERP nr:12206002665 LOT SE029 SE/SRPPOL/0053/17 CARD; EQUIPMENT, BAGGING SCALE(1 Off) Reference No: P/PROP 0016, Tag No / Technical ID: PP1- A730-1/2, Equipment Serial No: 35889, Machine Model No: 2BEC60ERP nr:10109502445 LOT SE030 SE/SRPPOL/0054/17 SCREW, MACHINE; THREAD DIAMETER M8, LENGTH 60 MM, HEAD CHEESE(1 Off) SLOTTED; SPARES FOR POLY 2 PACKLINE, SPRING, GVGCH, BAGGING MACHINE, PIVOTING PLATE, BAG INFEED ; Mnfr Part No: 59402134 Mnfr: WINDMOELLER & HOELSCHER CORP, Specification: DIN EN ISO 1207ERP nr:12203102338 LOT SE031 SE/SRPPOL/0055/17 FUSE; Mnfr Part No: 04236066 (9 Off) Mnfr: WINDMOELLER & HOELSCHER CORPERP nr:10108402311 LOT SE032 SE/SRPPOL/0056/17 BOLT; TYPE SPRING; SPRING, (4 Off) FOR BAG DEVIATING UNIT BAGGING MACHINE ; Mnfr Part No: 59402125 Mnfr: WINDMOELLER & HOELSCHER CORP, Sasol Drg: 7334.28.010-1 Rev 0 Mnfr: NOTE: IT IS A CONDITION OF THIS ORDER THAT THE LATEST DRAWING REVISION IS VERIFIED WITH THE BUYER., Reference No: SR 23420, Tag No / Technical ID: PP1- A731, Equipment Serial No: 35888, Machine Model No: DIAMANT 7330ERP nr:12203102727 LOT SE033 SE/SRPPOL/0057/17 HEAD; FOR AUTOMATIC FLAT FILM (1 Off) APPLICATOR AND HOIST FOR AUTOMATIC FLAT FILM APPLICATOR,TYPE;FORK ; Mnfr Part No: 703626 Mnfr: MOLLERS GMBH, Mnfr Drg: DPZ-11202Z-4A Rev 0 Item 23, Equipment Serial No: 17.925-3.6ERP ERP nr:12206002647 LOT SE034 SE/SRPPOL/0058/17 BOLT, MACHINE; THREAD DIAMETER M10; WDS825 401(2 Off) Mnfr Part No: 02000230 Mnfr: WINDMOELLER & HOELSCHER CORP, Mnfr Drg: 7331080603 Rev 0 Item 19, SPIR: PP2/2032AERP nr:12206002852 LOT SE035 SE/SRPPOL/0059/17 KEY; TYPE FEATHER; 6X6X80MM ; Mnfr Part No: 03329057 (2 Off) Mnfr Drg: 7331040101 REV 0 Item 13, SPIR: PP2/2032AERP nr:12206002806 LOT SE036 SE/SRPPOL/0060/17 COUPLING; FOR BAGGING MACHINE BAG MAKING SECTION;(1 Off) TYPE- SPRING PLATE, V23422-A0008; MATERIAL SPEC- ALU ; Mnfr Part No: 0208044 Mnfr: WINDMOELLER & HOELSCHER CORP, Reference No: P/PROP 0016, Tag No / Technical ID: PP1- A731, Equipment Serial No: 35888, Machine Model No: DIAMANT 7330ERP nr:12206002105 Hereby I/we confirm that I/we have read and understand the terms and conditions of this tender sale. Signature

11 Tender Document SE09-503-17 - Bagging Line Spares_RE-TENDER TENDER ITEMS LOT NO BUN NO. DESCRIPTION REG NO AMOUNT LOT SE037 SE/SRPPOL/0061/17 LEVER; LOCKING; ID-300-63-M8-32SZ(2 Off) Mnfr Part No: 03500241 Mnfr: WINDMOELLER & HOELSCHER CORP, Mnfr Drg: 7331041400 REV 0 Item 8, SPIR: PP2/2032AERP nr:12206002816 LOT SE038 SE/SRPPOL/0062/17 BOLT; TYPE SPRING; SPRING, (4 Off) FOR BAG DEVIATING UNIT BAGGING MACHINE ; Mnfr Part No: 59402130 Mnfr: WINDMOELLER & HOELSCHER CORP, Mnfr Drg: 7334.28.010-1 Rev 0, Reference No: SR 23420, Tag No / Technical ID: PP1- A731, Equipment Serial No: 35888, Machine Model No: DIAMANT 7330ERP nr:12203102728 LOT SE039 SE/SRPPOL/0063/17 ROD END; ARTICULATION (1 Off) Mnfr Part No: 02227320 Mnfr: WINDMOELLER & HOELSCHER CORP Mnfr Part No: BEF 20 20 501 R, SPIR: PP2/2032AERP nr:12206003018 LOT SE040 SE/SRPPOL/0064/17 SWITCH, PROXIMITY; TYPE NJ15 U1 E2, SENSING RANGE 15 MM, (2 Off) OPERATING POTENTIAL 10-30 VDC, OPERATING CURRENT 200 MA; Mnfr: PEPPERL & FUCHS, Reference No: BAGGING LINE, P/PROP 0012, Tag No / Technical ID: PP1-A740 / A760ERP nr:15501602032 LOT SE041 SE/SRPPOL/0065/17 ROD END; CONNECTION FPT(5 Off) TYPE- FEMALE THREAD LEFT-HAND, SIK10ESA; SIZE- 10 MM ; Reference No: P/PROP 0016, Tag No / Technical ID: PP1- A731ERP nr:10202602008 LOT SE042 SE/SRPPOL/0066/17 SPROCKET; TYPE DIVERTING, TEETH 13, MATERIAL STEEL (6 Off) 3/4 WITH BEARING 1717-16C4 FOR PLS-PALLETIZER LIFT WITH LOADING ROLLER CONVEYOR, POS 29 ; Mnfr Part No: 100386 Mnfr: MOLLERS MACHINENFABRIK GMBH, Mnfr Drg: DPL-13500Z-4B REV 0 Item 4ERP nr:12301402335 LOT SE043 SE/SRPPOL/0067/17 CABLE, ELECTRICAL; CONDUCTOR MATERIAL CU 1 CORE MULTI STRAND,(1 Off) CONDUCTOR SIZE 6 MM2, COVERING CLEAR SILICON, CONDUCTOR INSULATION SILICON HIGH TEMPERATURE 250 DEG C; EQUIPMENT- BAGGING MACHINE CLAMPING AND NEEDLE DEVICE, ITEM TYPE- WNE 13/1197, NO SUBSTITUDE ACCEPTED, (1 ROLL = 30M) ; Mnfr Part No: 04301059 Mnfr: WINDMOELLER & HOELSCHER CORP, Reference No: P/PROP 0016, Tag No / Technical ID: PP1- A731, Equipment Serial No: 35888, Machine Model No: DIAMANT 7330ERP nr:14300402000 LOT SE044 SE/SRPPOL/0068/17 TRANSFORMER, POWER; APPARENT POWER 1500 VA; MTSN 1500 (1 Off) Mnfr Part No: 04475326 Mnfr: WINDMOELLER & HOELSCHER CORPERP nr:15700102236 LOT SE045 SE/SRPPOL/0069/17 POWER SUPPLY; Mnfr Part No: 704365 Mnfr: MOLLERS GMBH(1 Off) Equipment Model No: CHECKWEIGHER, Equipment Serial No: 17 925ERP nr:10109503140 LOT SE046 SE/SRPPOL/0070/17 CYLINDER; ECQ 2 A 40-75 D; FOR MOBIL STREAM BALANCE(2 Off) Mnfr Part No: 5465314 Mnfr: COPERION WAESCHLE GMBH & CO KG, Mnfr Drg: DO-ANU-24074040 REV 0 Item 4, Equipment Serial No: 2407404-1/2/3/4ERP nr:10107402214 LOT SE047 SE/SRPPOL/0071/17 CYLINDER; SIZE 40 MM; FLANGE- PN 5154/SN 40; SHAFT CLEVIS- (1 Off) PN 6145/SN SG-M12 X 1.25; BACK MOUNT CLEVIS- PN 5148/SN LN40 ; Mnfr Part No: 14131 Mnfr: FESTO (PTY) LTD Mnfr Part No: DNU 40-45 PPV-A Mnfr: FESTO (PTY) LTD, Reference No: SR 0042, Tag No / Technical ID: A730/1 AND A730/2ERP nr:10106602123 Hereby I/we confirm that I/we have read and understand the terms and conditions of this tender sale. Signature