Douglas C. Stahl Professor, Civil & Architectural Engineering & Construction Management Degree with Fields, Institution, and Date PhD, Civil and Environmental Engineering, Univ of WI--Madison, 1996 MS, Civil and Environmental Engineering, Univ of WI--Madison, 1988 BS, Architecture and Engineering, Princeton University, 1985 Years of Service on this Faculty: 17 Date of Original Appointment: September 1996 Advancement in Rank/Position Professor, September 2009 Associate Professor, September 2001 Assistant Professor, September 1996 Other Teaching Experience "Structural Analysis Tools and Techniques." UW - Madison Department of Engineering Professional Development, 3 day Continuing Education course Lecturer/Teaching Assistant/Research Assistant, UW - Madison Department of Civil and Environmental Engineering Industrial Experience Structural Engineer, Flad and Associates, Madison, Wisconsin Professional Licensure and Certification Licensed Structural Engineer - Illinois Registered Professional Engineer - Wisconsin Publications Schultz, J., Stahl, D., and Stutzki, C. Experimental Investigation of Numerical Design Method for Point Supported Glass, Journal of Architectural Engineering 18(3), ASCE, pp. 223-232. 2012.
Page 2 of 5 Cook, D., Knier, B., Gervasi, V., Stahl, D. Automatic Generation of Strong, Light, Mutli-Functional Structures from FEA Output, Proceedings of the 21st Annual International Solid Freeform Fabrication (SFF) Symposium. Austin, Texas (2010). Hindi, R., Browning, B., Stahl, D., Behavior of Reinforced Concrete Columns Under Reversed Cyclic Torsion, Ninth Canadian Conference on Earthquake Engineering, Ottawa, Ontario, Canada, 26-29 June 2007. Hindi, R., Turechek, W., Hoven, B., Stahl, D., Hysteretic behavior of R/C columns confined with opposing spirals, Proceedings of Structures Congress 2006, ASCE, St. Louis, 2006. Stahl, D. C., and Gervasi, V. Design and Fabrication of components with optimized composite microstructure, Proceedings: 2006 NSF Design, Service, and Manufacturing Grantees and Research Conference, St. Louis, 2006. Stahl, D. C., and Gervasi, V. Design and Fabrication of components with optimized composite microstructure, Proceedings: Design, Service, and Manufacturing Research Grantees Conference, NSF. Scottsdale, Arizona, 2005. Stahl, D. C. and Batdorff, M., Design of components with optimized microstructure, Proceedings: Design Engineering Technical Conference, ASME. Salt Lake City, 2004. Stahl, D. C., Gervasi, V., and Batdorff, M., Design and Fabrication of components with optimized microstructure, Proceedings: Design Engineering Technical Conference, ASME. Salt Lake City, 2004. Stahl, D. C., Wolfe, R., and Begel, M. Improved analysis of timber rivet connections, Journal of Structural Engineering 130(8), ASCE, pp. 1272-1279. 2004. Gervasi, V., and Stahl, D. "Design and fabrication of components with optimized lattice structures," Proceedings: 2004 Solid Freeform Fabrication Symposium, Austin, Texas, 2004. Stutzki, C., Vande Zande, B., Stahl, D. Design of connections for glass structures, Stahlbau 73(8), Ernst & Sohn, Berlin, pp. 588-594, 2004. Begel, M., Wolfe, R., Stahl, D. C., Timber rivet connections in U.S. domestic species, Res. Pap. FPL-RP-619. USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. 16 pp., 2004. Stahl, D. C. and DeVries, R. A., Large scale destructive testing in an undergraduate structural engineering curriculum, Proceedings: 2003 ASEE Annual Conference and Exposition, American Society for Engineering Education, session 2793, 2003. Stahl, D. C. and Batdorff, M., Describing optimised microstructures for solid freeform fabrication, Proceedings: Computer Aided Optimum Design of Structures VIII, WIT Press, Wessex Institute of Technology, Southampton, UK. 2003. Stahl, D. C., and Gervasi, V. Design and fabrication of components with optimized lattice microstructures Proceedings: 2003 NSF Design, Service, and Manufacturing Conference, Birmingham, Alabama, January, 2003. Stahl, D. C., Skoraczewski, G., Arena, P., and Stempski, B., Lightweight masonry with recycled wood aggregate, Journal of Materials in Civil Engineering 14(2), ASCE, pp. 116-121, 2002. Ostoja-Starzewski, M., and Stahl, D. C., Random fiber networks and special elastic orthotropy of paper, Journal of Elasticity 60, pp. 131-149, 2000.
Page 3 of 5 Ostoja-Starzewski, M. and Stahl, D. C., Mechanics of random fiber networks, Recent Advances in the Mechanics of Structured Continua Proceedings of IMECE-2000, ASME, pp. 45-56, 2000. Stahl, D. C., Begel, M., and Wolfe, R. W., Simplified analysis of timber rivet connections, Proceedings: World Conference on Timber Engineering, 2000. Stahl, D. C. and DeVries, R. A., Structural Engineering Workshop: a curriculum of real and virtual experiments, Proceedings: 2000 ASEE Annual Conference and Exposition, American Society for Engineering Education, session 1526. 2000. Capano, C., Stahl, D. C., and McGeen, M., Educating future constructors utilizing a project specific web site, Proceedings: Construction Congress VI, ASCE, pp. 234-243, 2000. Ostoja-Starzewski, M., Quadrelli, M.B., and Stahl, D. C., "Kinematics, stress transfer mechanisms, and effective properties of quasi-planar random fiber networks," Comptes Rendus de l'académie des Sciences Paris, Série IIb 327(12), pp. 1123-1229, 1999. Stahl, D. C., Capano, C., McGeen, M., Hassler, J. M., and Groser, L., Implementation of project specific web sites in a capstone design course, Proceedings: 1999 ASEE Annual Conference and Exposition, American Society for Engineering Education, Session 1606. 1999. Stahl, D. C., and Ostoja-Starzewski, M., Two- and three-dimensional fiber network models for paper mechanics, Proceedings: 1999 International Paper Physics Conference, TAPPI. 1999. Ostoja-Starzewski, M., and Stahl, D. C., A micromechanics explanation of special elastic orthotropy of paper, Mechanics of Cellulosic Materials, American Society of Mechanical Engineers AMDvol. 231 / MD-vol. 85, pp. 23-30. 1999. Stahl, D. C., and Cramer, S. M., A three-dimensional network model for a low density fibrous composite, ASME Journal of Engineering Materials and Technology, 120(2), pp. 126-130. 1998. Stahl, D. C., Cramer, S. M., and Geimer, R. L., Effects of microstructural heterogeneity in cement excelsior board, Wood and Fiber Science, 29(4), pp. 345-352. 1997. Stahl, D. C., and Saliklis, E. P., A heterogeneous network model for paper, Mechanics of Cellulosic Materials, American Society of Mechanical Engineers AMD-vol. 221 / MD-vol. 77, pp. 19-25. 1997. Hermanson, J. C., Stahl, D. C., Cramer, S. M., Shaler, S. M. " Transformation of elastic properties for lumber with cross grain." ASCE Journal of Structural Engineering, 123(10), pp. 1402-1407. 1997. Stahl, D. C., Cramer, S. M., and Wolfe, R. W., "Behavior of metal plate connected trusses with square-end webs," Forest Products Journal, 46(6), pp.78-84. 1996. Wolfe, R. W., Stahl, D. C., and Cramer, S. M., Experimental Assessment of Wood Trusses With Square-End Webs, Res. Pap. FPL-RP-544, USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. 19 pp. 1996. Stahl, D. C., Wolfe, R. W., Cramer, S. M., and McDonald, D. Strength and stiffness of large-gap metal plate wood connections, Res. Pap. FPL-RP-535, USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. 9 pp. 1995. Stahl, D. C., Cramer, S. M., and McDonald, K. A. "Modeling the effect of out-of-plane fiber orientation in lumber specimens," Wood and Fiber Science, 22(2), pp. 173-192. 1990.
Page 4 of 5 Cramer, S. M., Stahl, D. C., Fohrell, W. B., and McDonald, K. A. "Exploring the relationship between local grain angle and initial fracture in lumber specimens subject to tensile load," Proceedings of the 1988 International Conference on Timber Engineering. Forest Products Research Society, Madison, Wisconsin. 1988. PATENTS Vito R. Gervasi, Adam J. Schneider, Josh Rocholl, and Douglas C. Stahl. "Casting Process." U.S. Patent No. 8,312,913. Filed February 22, 2006; issued November 20, 2012. Scientific and Professional Societies of Which a Member Engineers Without Borders USA American Society of Civil Engineers American Society for Engineering Education Honors and Awards Karl Werwath Engineering Research Award - MSOE L. J. Markwardt Wood Engineering Research Award - Forest Products Society Oscar Werwath Distinguished Teaching Award - MSOE Institutional and Professional Service Grants Received Philip Orth Grant to Support the Wisconsin-Guatemala Infrastructure Initiative 2012-14, Rotary Club of Milwaukee. Funding for Muculinquiaj Bridge 2012, the Boeing Company (administered by Engineers Without Borders-USA). "Fluid Power Components with Optimized Stiffness to Weight Ratio" 2004-2006, National Fluid Power Association "Design and Fabrication of Components with Optimized Intertwined Lattice Microstructures." 2002-2005. NSF Division of Design, Manufacturing, and Industrial Innovation. "Structural Engineering Workshop: Experiments in the Structural Engineering Curriculum." 2002-2004. NSF Course, Curriculum, and Laboratory Improvement Program. "Optimal Performance of Cellulose Fiber Networks," 2000-2001, Institute of Paper Science and Technology. "Hardened-steel Dowel Connections in Solid Timber and Lumber Products," 1999-2001, U.S. Department of Agriculture Competitive Grants Program "Undergraduate Laboratory for Full Scale Structural Component Testing, 1998-9, NSF Instrumentatio0n and Laboratory Improvement Program.
Page 5 of 5 "Wood Aggregate Concrete Masonry," 1998-9, Lake States Wood Utilization Consortium and Wisconsin Concrete Masonry Association. Special Qualifications