BIBLIOGRAPHY Anglin, J. M., Aircraft Applications, in T. J. Reinhart et al., eds., Engineering Materials Handbook, Vol. 1, Composites, Metals Park, OH: ASM International, 1987. Asher, Harold, Cost-Quantity Relationships in the Airframe Industry, Santa Monica: RAND, R-291, 1956. Baron, W., et al., Structures Technology for Future Aerospace Systems, in A. K. Noor, ed., Progress in Astronautics and Aeronautics, New York: Aerospace Industries Association of America, 2000. Beardmore, P., et al., Fiber-Reinforced Composites: Engineered Structural Materials, Science, May 1980. Benkard, C. Lanier, Learning and Forgetting: The Dynamics of Commercial Aircraft Production, American Economic Review, September 2000. Belbin, G. R., and P. A. Staniland, Advanced Thermoplastics and Their Composites, Philosophical Transactions of the Royal Society of London, July 1987. Boeing, Fiber Placement Benchmark and Technology Roadmap, Fiber Placement Guidelines, Washington DC: DARPA, April 1999. Blake, Scott, Laser Guidance for Hand-Laid Composites: Past, Present and Future, presented at Composites 97 Manufacturing and Tooling, Society of Manufacturing Engineers Conference, Anaheim, CA, 1997. 133
134 Military Airframe Costs Caldwell, M. H., Material Selection for the New-Technology Commercial Transport The Designer s Dilemma, presented at the AIAA Aircraft Design, Systems and Technology Meeting, Fort Worth, TX, 1983. Composite Materials Handbook, MIL-HDBK-17-1E, working draft, December 1999, available at http://mil-17.udel.edu/. Connolly, J. J., and J. C. Foster, Cost Driven Design Concerns, presented at the Composites in Manufacturing, Society of Manufacturing Engineers Conference, Anaheim, CA, 1989. Cook, Cynthia R., and John C. Graser, Military Airframe Acquisition Costs: The Effects of Lean Manufacturing, Santa Monica: RAND, MR-1325-AF, 2001. CytecFiberite material information, available at http://www. cytecfiberite.com. Dougherty, J. J. III, and J. Liiva, The Design and Manufacture of an All Digital V-22, AGARD Conference Proceedings 602, Quebec, Canada, September 1997. Drake, T. E., et al., Large-Scale Laser Ultrasonic Facility for Aerospace Applications, presented at the Defense Manufacturing Conference, 98 Proceedings, New Orleans, LA, 1998. Flinn, Richard A., and Paul K. Trojan, Engineering Materials and Their Applications, Boston: Houghton Mifflin Company, 1975. Gordon, J. E., Structures, or Why Things Don t Fall Down, New York: Da Capo Press, 1978. Gutowski, T. G., ed., Advanced Composites Manufacturing, New York: John Wiley & Sons, 1997. Hansen, Niel, Carbon Fibers, in T. J. Reinhart et al., eds., Engineering Materials Handbook, Vol. 1, Composites, Metals Park, OH: ASM International, 1987. Harper-Tervet, Jan, et al., Superplastic Diaphragm Forming of Thermoplastic Complex Shaped Composites As a Cost Effective Manufacturing Process, presented at the 29th International SAMPE Technical Conference, October 1997.
Bibliography 135 Hartness, T. J., The Characterization of Thermoplastic Polyimide Composites, presented at the 28th International SAMPE Technical Conference, November 1996. Hazen, J. R., et al., eds., High Performance Composites, Source Book 1999, Wheat Ridge, CO: Ray Publishing, November 1998. Hazen, J. R., et al., eds., High Performance Composites, Source Book 2000, Wheat Ridge, CO: Ray Publishing, November 1999. Hess, R. W., J. R. Nelson, P. S. Killingsworth, and S. A. Resetar, Estimating the Cost of Advanced Technology, Santa Monica: RAND, P-7732, 1992. Hess, R. W., and H. P. Romanoff, Aircraft Airframe Cost Estimating Relationships: Study Approach and Conclusions, Santa Monica: RAND, R-3255-AF, 1987. Hexcel material information, available at http://www.hexel.com. Horton, R. E., and J. E. McCarty, Damage Tolerance of Composites, in T. J. Reinhart et al., eds., Engineering Materials Handbook, Vol. 1, Composites, Metals Park, OH: ASM International, 1987. Hough, Paul G., Impact of Advanced Manufacturing Technology on Parametric Estimating, Santa Monica: RAND, P-7543, 1989. Jang, Bor Z., Advanced Polymer Composites: Principles and Applications, Metals Park, OH: ASM International, 1994. Jones, Robert M., Mechanics of Composite Materials, New York: McGraw-Hill, 1975. Juvinall, Robert C., Engineering Considerations of Stress, Strain, and Strength, New York: McGraw-Hill, 1967. Kalpakjian, S., Manufacturing Processes for Engineering Materials, Reading, MA: Addison-Wesley Publishing Company, July 1985. Kelly, A., Composites for the 1990s: Advanced Thermoplastics and Their Composites, Philosophical Transactions of the Royal Society of London, July 1987.
136 Military Airframe Costs Kerr, A. B., Good Tooling Makes Good Parts Pay Me Now or Pay Me Later, EM86-115, presented at the Composites in Manufacturing, Society of Manufacturing Engineers Conference, Los Angeles, 1986. Lee, David, The Cost Analyst s Companion, McLean, VA: Logistics Management Institute, 1997. Lorell, Mark A., and John C. Graser, An Overview of Acquisition Reform Cost Savings Estimates, Santa Monica: RAND, MR-1329- AF, 2001. Lorell, Mark A., and Hugh P. Levaux, The Cutting Edge: A Half Century of U.S. Fighter Aircraft R&D, Santa Monica: RAND, MR- 939-AF, 1998. Luce, S. E., Introduction to Composite Tooling, EMR91-15, Dearborn, MI: Society of Manufacturing Engineers, 1991. Lyle, Richard C., Composite Tooling Invar Evolution: The Process Today, the Process Tomorrow, presented at the Tooling for Composites, Society of Manufacturing Engineers Conference, Pasadena, CA, 1993. McDonnell Douglas, Low Cost Composite Processing, Wright- Patterson Air Force Base, OH: Air Force Research Laboratory, October 1997. Popov, E. P., Mechanics of Materials, 2nd ed., Englewood Cliffs, NJ: Prentice-Hall, 1976. Potter, K., An Introduction to Composite Products Design and Manufacture, London: Chapman and Hall, 1984. Proctor, P., High-Performance Machining Provides Efficiency Gains, Aviation Week & Space Technology, August 24, 1998. Proctor, P., Stitched Composite Wings Eyed for Future Transports, Aviation Week & Space Technology, August 24, 1998. Raymer, Daniel P., Next-Generation Attack Fighter: Design Tradeoffs and Notional System Concepts, Santa Monica: RAND, MR-595-AF, 1996.
Bibliography 137 Reinhart, T. J., et al., eds., Engineering Materials Handbook, Vol. 1, Composites, Metals Park, OH: ASM International, 1987. Resetar, Susan A., J. Curt Rogers, and Ronald W. Hess, Advanced Airframe Structural Materials: A Primer and Cost Estimating Methodology, Santa Monica: RAND, R-4016-AF, 1991. Shigley, J. E., and C. R. Mischke, Mechanical Engineering Design, 5th ed., New York: McGraw-Hill, 1989. Taggart, D. F., and D. Sidwell, Integrated Airframe Technology for Affordability, Lockheed Martin Skunk Works, Wright-Patterson Air Force Base, OH: Air Force Research Laboratory, August 1999. Traceski, F. T., Assessing Industrial Capabilities for Carbon Fiber Production, Acquisition Review Quarterly, Spring 1999. Van Vlack, L. H., Elements of Material Science and Engineering, 5th ed., Reading, MA: Addison Wesley, 1985. Wright, T. P., Factors Affecting the Cost of Airplanes, Journal of the Aeronautical Sciences, Vol. 3, February 1936, pp. 122 128. Zaloom, Victor, and Clint Miller, A Review of Cost Estimating for Advanced Composite Materials Applications, Engineering and Production Economics, Amsterdam, Netherlands: Elsevier Publishing Company, 1982.