GVS-65 & GVS-90 Gas Venting Solutions Pipe & Fittings

Similar documents
ROYAL GROUP, INC. TERMS AND CONDITIONS OF SALE

Backwater Valves & Terminal Backwater Valves

Terms and Conditions of Sales

Terms and Conditions of Sale

MODULAR MINING SYSTEMS TERMS AND CONDITIONS OF SALE

GENERAL TERMS AND CONDITIONS FOR THE SALE OF GOODS

Confirmation of Purchase Order/Terms and Conditions of Sale 1. ACCEPTANCE OF ORDER: Natel Engineering Co., Inc. or it s Powercube division ( Natel or

DAYTON Lamina Corporation

Purchase Terms and Conditions

Order & Quotation Terms & Conditions DEFINITIONS: Buyer Order Product Quotation RFQ Seller Terms and Conditions 1. Applicability:

sold under a separate Order. Failure of Seller to deliver any installment shall not entitle Buyer to cancel the balance of the Order. 4.3 Any time quo

AIRBOSS RUBBER SOLUTIONS - TERMS AND CONDITIONS OF SALE

Purchase Terms and Conditions

Gopher Mats, LLC d/b/a Viking Helical Anchors

KSS Sales Proposal Terms & Conditions

Boral Stone Products LLC Standard Terms and Conditions For the Sale of Goods and/or Services

WHRL SOLUTIONS LLC. CONDITIONS AND TERMS OF SALE 1. APPLICABLE TERMS.

TERMS AND CONDITIONS FOR THE SALE OF GOODS AND SERVICES

STANDARD TERMS AND CONDITIONS OF SALE

TERMS AND CONDITIONS OF SALE

APPENDIX A KOA SPEER ELECTRNONICS TERMS AND CONDITIONS OF SALE

Terms & Conditions of Sale:

APPLICABLE TERMS AND CONDITIONS

Standard Terms and Conditions of Sale

TERMS AND CONDITIONS OF SALE

Pro Flow Dynamics, LLC. Standard Terms and Conditions of Sales

Standard Terms and Conditions of Sale (Rev. 03/2017) Page 1 of 5

NATIONAL FOAM, INC. - GENERAL TERMS AND CONDITIONS FOR THE SALE OF GOODS. 1. Applicability.

JOS MALAYSIA - GENERAL TERMS AND CONDITIONS OF SALE

Emerson Heating Products

CHRISTY METALS, INC. AND AFFILIATES TERMS AND CONDITIONS

GENERAL TERMS AND CONDITIONS OF SALE. December 2010

MODULAR MINING SYSTEMS PTY LIMITED ACN TERMS AND CONDITIONS OF SALE

TERMS AND CONDITIONS OF SALE

SYSTRON DONNER INERTIAL General Terms and Conditions Of Sale

CREE SALES TERMS AND CONDITIONS

SABIC GENERAL TERMS AND CONDITIONS OF SALE

MOLDED FIBER GLASS COMPANIES Terms and Conditions of Sale (Custom Molding Products)

SABIC INNOVATIVE PLASTICS ARGENTINA CONDITIONS OF SALE

KORRY ELECTRONICS CO TERMS AND CONDITIONS OF SALE

TURTLE & HUGHES, INC. AND SUBSIDIARIES TERMS AND CONDITIONS OF QUOTATION AND SALE

COHERENT TERMS AND CONDITIONS OF SALE TAIWAN

Contents. Selling Policy (Supersedes Selling Policy , dated February 20, 2006)

Projects Unlimited, Inc. PURCHASE ORDER TERMS AND CONDITIONS September 15, 2013

TERMS AND CONDITIONS OF SALE England Greene, Tweed & Co., Limited. Act the Late Payment of Commercial Debts (Interest) Act 1998;

ALLIED INTERNATIONAL SUPPORT, INC. TERMS AND CONDITIONS OF PURCHASE ORDER

GW Plastics, Inc. Terms & Conditions of Sale

AUTOMATED PACKAGING SYSTEMS, INC. VENDOR TERMS AND CONDITIONS

TERMS AND CONDITIONS OF SALE

NELA USA Terms and Conditions of Sale

KOHLER INDUSTRIES, INC. Term and Conditions of Sale, Including Limited Warranty

TERMS AND CONDITIONS OF SALE

GENERAL TERMS AND CONDITIONS

TERMS AND CONDITIONS February, 2014

SALES TERMS AND CONDITIONS

e. Seller s remedies relating hereto to shall be cumulative and in addition to any other remedies provided herein or by law or in equity.

Terms and Conditions of Sale

AP ARMAFLEX Black LapSeal Tube (6 ft. length)

Molex Standard Terms and Conditions for the Asia Pacific Region

ACKNOWLEDGEMENT YOUR ORDER IS ACCEPTED SUBJECT TO THE MOLEX TERMS AND CONDITIONS APPEARING HEREON

Bioquell Inc. Standard Terms and Conditions for the Sale of Goods & Supply of Services (version: [December 2010])

PURCHASE ORDER TERMS AND CONDITIONS

ALLIED INTERNATIONAL SUPPORT, INC. TERMS AND CONDITIONS OF SALE

TERMS AND CONDITIONS OF SALE

TERMS OF SALE. 3.2 Each order accepted constitutes a separate legally binding Contract between FAV and the Buyer.

TERMS AND CONDITIONS OF SALE

Standard Terms and Conditions of Sale Non-Systems The Americas

SALES ORDER TERMS AND CONDITIONS

SUZUKI AUSTRALIA PTY. LIMITED ACN ABN TERMS AND CONDITIONS OF SALE

Standard Terms and Conditions of Sale Covering Sales of Equipment, Systems and Made to Order Goods The Americas

TERMS AND CONDITIONS

1.0 Terms and Conditions of Sale

TERMS AND CONDITIONS OF PURCHASE (T&C s)

1. Acceptance. The following terms and conditions of sale are applicable to all sales of Products or Services, and all quotations, order

APPLICATION FOR CREDIT - Page 1 of 7

ROTOR CLIP PURCHASE ORDER GENERAL TERMS AND CONDITIONS

General Terms and Conditions of Purchase of HBM United Kingdom Limited

ELLWOOD GROUP TERMS AND CONDITIONS OF SALE

HOUSE OF METALS CO. LTD. GENERAL TERMS AND CONDITIONS OF SALE 1. General Application; Acceptance. The sale, shipment and delivery by House of Metal

GENERAL TERMS AND CONDITIONS OF SALE FOR MARINE FUEL

Terms & Conditions. Cleveland, OH Toledo, OH Pharr, TX. Universal Metal Products, Inc Lakeland Boulevard Cleveland, OH

INNOPHOS, INC. ( SELLER ) GENERAL TERMS AND CONDITIONS OF SALE

TERMS AND CONDITIONS OF SALE

Sale Order Terms and Conditions. Article I Sales Within the Continental United States

TENTE CASTORS LIMITED TERMS & CONDITIONS Page 2 of 6 credit limit is established, payment will usually be collected prior to goods being dispatched.

LIMITED WARRANTY AND REMEDY

Molex Standard Terms and Conditions for the Americas Region, US, Canada, Brazil and Mexico

General Terms and Conditions of Purchase Order

Appliance Parts Catalog

Sales Agreement for Grapevine Nursery Stock

WATER SERVICE AGREEMENT. Water One Assurance Monitoring Service

EATON FILTRATION BUSINESS

TERMS AND CONDITIONS OF SALE

Credit Application. Duns # Federal ID #/SS #

TERMS AND CONDITIONS OF SALE

PURCHASE AND SALE AGREEMENT X-1 Mini (Pre Orders)

2. TITLE AND RISK OF LOSS

College Fair Automation GTCFKDC Purchases Scanner warranty information

STANDARD CONDITIONS OF SALE. WILLIAM ROWLAND LIMITED ( the Seller)

TERMS AND CONDITIONS OF SALE

Transcription:

GVS-65 & GVS-90 Gas Venting Solutions Pipe & Fittings Rated For Maximum Flue Gas Temperatures of 65 C and 90 C. Canadian National Price List List No: P-GVS6590-PLV6 Effective: January 1, 2015 Replaces: March 1, 2014 All Prices are Taxes Extra

GVS-65 & GVS-90 Gas Venting Solutions Please Note: Royal Building Products, Plumbing Solutions GVS-65 and GVS-90 Gas Venting Solutions pipe and fittings must be installed according to the published installation instructions by a qualified professional. Royal Building Products, Plumbing Solutions GVS-65 and GVS-90 components (pipe, fittings, accessories, solvent cements and primer) must be installed as a system. Do NOT use components from other manufacturers with GVS-65 and GVS-90 components. 3

Gas Venting Solutions - GVS-65 (PVC) GVS-65 Pipe & Fittings are white in color and rated for flue gas temperatures up to and including 65 C PVC Gas Vent Pipe (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) S40GV01510WHPE 194003 1½ 1,510 $245.00/100ft S40GV02010WHPE 194000 2 1,050 $390.00/100ft S40GV02510WHPE 194004 2½ 780 $620.00/100ft S40GV03010WHPE 194001 3 580 $913.00/100ft S40GV04010WHPE 194002 4 510 $1,107.00/100ft PVC Coupling (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 32GVCOUP015HH 196452 1½ 25 $1.75 32GVCOUP02HH 196352 2 70 $2.50 32GVCOUP025HH 196454 2½ 20 $4.50 32GVCOUP03HH 196353 3 60 $5.80 32GVCOUP04HH 196354 4 30 $10.00 PVC Long Coupling (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 32GVDCOUP02HH 196453 2 20 $4.10 32GVDCOUP03HH 196455 3 25 $9.30 PVC Increaser Coupling (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 52GVIN01502INCHH 196362 1½ x 2 150 $4.70 52GVIN0203INCHH 196364 2 x 3 45 $9.10 52GVIN0204INCHH 196365 2 x 4 30 $12.00 52GVIN0304INCHH 196366 3 x 4 30 $13.75 PVC Reducer Bushing (H x Sp) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 52GVIN05015INCHS 196653 ½ x 1½ 160 $1.60 52GVIN01502INCHS 196282 1½ x 2 80 $2.05 52GVIN015025INCHS 196666 1½ x 2½ 60 $4.00 52GVIN02025INCHS 196667 2 x 2½ 60 $4.15 52GVIN0203INCHS 196284 2 x 3 50 $4.50 52GVIN02503INCHS 196673 2½ x 3 20 $4.70 PVC Hex Head Reducer Bushing (H x Sp) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 52GVHHIN0203INCHS 196672 2 x 3 20 $9.85 4

Gas Venting Solutions - GVS-65 (PVC) GVS-65 Pipe & Fittings are white in color and rated for flue gas temperatures up to and including 65 C PVC 90 Elbow (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 26GV9002HH 196035 2 50 $4.25 26GV90025HH 196525 2½ 10 $9.20 26GV9003HH 196025 3 25 $11.85 PVC 90 Elbow (H x Sp) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 26GV9002HS 196232 2 60 $3.70 26GV9003HS 196233 3 15 $10.55 PVC 90 Long Elbow (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 25GVL90015HH 196121 1½ 120 $3.40 25GVL9002HH 196122 2 55 $4.50 25GVL9003HH 196123 3 23 $12.00 25GVL9004HH 196124 4 20 $23.95 PVC 90 Extra Long Elbow (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 25GV9002HH 196022 2 40 $4.70 25GV9003HH 196023 3 15 $12.55 PVC 45 Elbow (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 26GV45015HH 196241 1½ 175 $2.30 26GV4502HH 196242 2 110 $3.70 26GV45025HH 196487 2½ 10 $8.20 26GV4503HH 196243 3 25 $10.10 26GV4504HH 196244 4 20 $18.00 PVC 45 Elbow (H x Sp) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 26GV4502HS 196071 1½ 50 $4.50 PVC 45 Long Turn Elbow (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 25GVL4502HH 196010 2 45 $4.25 25GVL4503HH 196011 3 20 $11.30 5

Gas Venting Solutions - GVS-65 (PVC) GVS-65 Pipe & Fittings are white in color and rated for flue gas temperatures up to and including 65 C PVC 22½ Elbow (H x H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 26GV2202HH 196252 2 45 $6.25 PVC Sanitary Tee (H x H X H) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 06GV015015015HHH 196081 1½ 110 $4.70 06GV020202HHH 196082 2 35 $7.60 06GV025025025HHH 196781 2½ 10 $11.15 06GV0202015HHH 196056 2 x 1½ 40 $6.05 06GV030303HHH 196083 3 17 $13.55 06GV0303015HHH 196061 3 x 1½ 30 $13.05 06GV030302HHH 196822 3 x 2 10 $16.55 06GV040404HHH 196084 4 5 $21.15 06GV040402HHH 196828 4 x 2 5 $27.70 PVC Female Adapter (H x FPT) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 18GV0202HFPT 196564 2 20 $3.60 PVC Hose Barb (Sp x B) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 94GVHB01505SB 196278 1½ x ½ 80 $2.05 PVC Test Bushing c/w Plug (Sp x FPT) (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 94GVTB0205SFPT 196143 2 x ½ 10 $8.30 6

Gas Venting Solutions - GVS-90 (CPVC) GVS-90 Pipe & Fittings are white in color and rated for flue gas temperatures up to and including 90 C CPVC Gas Vent Pipe (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) S40CPVCGV01510GYPE 198003 1½ 1,510 $917.00/100ft S40CPVCGV02010GYPE 198001 2 1,050 $1,216.00/100ft S40CPVCGV02510GYPE 198004 2½ 780 $1,932.00/100ft S40CPVCGV03010GYPE 198000 3 580 $2,515.00/100ft S40CPVCGV04010GYPE 198002 4 510 $3,576.00/100ft S40CPVCGV06010GYPE 198005 6 260 $4,891.00/100ft S40CPVCGV08010GYPE 198006 8 100 $6,522.00/100ft CPVC Coupling (H x H) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 32GVFCOUP015HH 197136 1½ 10 $5.40 32GVFCOUP02HH 197137 2 10 $7.65 32GVFCOUP025HH 197138 2½ 5 $14.40 32GVFCOUP03HH 197139 3 5 $19.30 32GVFCOUP04HH 197023 4 5 $30.05 32GVFCOUP06HH 197141 6 5 $79.70 32GVFCOUP08HH 197142 8 2 $169.05 CPVC Increaser Coupling (H x H) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 52GVFIN0203INCHH 197470 3 x 2 5 $26.10 52GVFIN0304INCHH 197472 4 x 3 5 $40.70 CPVC Hex Head Reducer Bushing (H x Sp) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 52GVFIN0502INCHS 197385 ½ x 2 80 $5.40 52GVFIN07502INCHS 197386 ¾ x 2 10 $5.85 52GVFIN01502INCHS 197389 1½ x 2 10 $6.25 52GVFIN0203INCHS 197394 2 x 3 10 $14.50 52GVFIN02503INCHS 197395 2½ x 3 10 $14.75 52GVFIN0204INCHS 197396 2 x 4 20 $24.75 52GVFIN0406INCHS 197400 4 x 6 10 $93.90 52GVFIN0608INCHS 197401 6 x 8 5 $133.95 CPVC 90 Elbow (H x H) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 26GVF9002HH 197199 2 15 $13.90 26GVF9003HH 197201 3 5 $35.00 26GVF9004HH 197202 4 5 $61.80 26GVF9006HH 197203 6 5 $138.80 26GVF9008HH 197204 8 2 $334.80 CPVC 90 Long Elbow (H x H) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 25GVFL9002HH 197122 2 55 $10.55 25GVFL9003HH 197123 3 23 $26.55 25GVFL9004HH 197124 4 20 $46.70 25GVFL9006HH 197125 6 5 $155.90 25GVFL9008HH 197126 8 2 $392.50 7

Gas Venting Solutions - GVS-90 (CPVC) GVS-90 Pipe & Fittings are white in color and rated for flue gas temperatures up to and including 90 C CPVC 45 Elbow (H x H) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 26GVF4502HH 197169 2 10 $10.80 26GVF4503HH 197171 3 5 $30.05 26GVF4504HH 197172 4 5 $47.10 26GVF4506HH 197173 6 5 $118.75 26GVF4508HH 197174 8 2 $263.90 CPVC Tee (H x H x H) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 09GVF020202HHH 197486 2 10 $19.10 09GVF030303HHH 197488 3 5 $40.40 09GVF030302HHH 197502 3 x 2 5 $35.85 09GVF040404HHH 197489 4 5 $56.60 09GVF040402HHH 197504 4 x 2 5 $60.05 09GVF060606HHH 197490 6 4 $202.05 09GVF060604HHH 197506 6 x 4 4 $185.70 09GVF080808HHH 197491 8 2 $438.65 09GVF080806HHH 197567 8 x 6 2 $415.10 CPVC Female Adapter (H x FPT) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 18GVF0202HFPT 197224 2 10 $8.40 CPVC Hose Barb (Sp x B) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 94GVFHB01505SB 197278 ½ x 1½ 80 $4.70 CPVC Test Bushing c/w Plug (Sp x FPT) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 94GVFTB0205SFPT 197143 2 10 $21.95 CPVC Condensate Drain Assembly (Sp x FPT) (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 94GVF0504CDAFS 197002 ½ x 4 1 $85.40 94GVF0506CDAFS 197003 ½ x 6 1 $154.75 8

Gas Venting Solutions - Accessories GVS-65 PVC Concentric Vent Kits (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 52CVKGVS6502 196005 2 x 16 1 $98.40 52CVKGVS6502-28 196105 2 x 28 1 $110.50 52CVKGVS6502-40 196125 2 x 40 1 $122.40 52CVKGVS6503 196006 3 x 20 1 $132.15 52CVKGVS6503-32 196106 3 x 32 1 $143.30 52CVKGVS6503-44 196116 3 x 44 1 $155.15 52CVKGVS6504 196021 4 x 36 1 $313.10 GVS-90 CPVC Concentric Vent Kits (Certified to ULC S636, Type BH Class IIB - Maximum Temperature Rating of 90 C) 52CVKGVSF9003 197009 3 x 20 1 $256.70 52CVKGVSF9003-32 197107 3 x 32 1 $276.30 52CVKGVSF9003-44 197117 3 x 44 1 $294.75 52CVKGVSF9004-36 197021 4 x 36 1 $612.50 GVS-65 PVC Wall Vent Kits (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 52WTVKGVS6502 081216 2 1 $76.15 52WTVKGVS65025 081218 2½ 1 $112.15 52WTVKGVS6503 081219 3 1 $126.20 GVS-65 PVC Side Wall Vent Kits (Certified to ULC S636, Type BH Class IIA - Maximum Temperature Rating of 65 C) 52SWVKGVS6502 196984 2 1 $36.60 52SWVKGVS6503 196985 3 1 $36.60 GVS-65 PVC Faceplate (Round - Self Foam Back - White) 94GVWHTROUDFP02 196063 2 65 $14.80 94GVWHTROUDFP03 196064 3 65 $18.10 94GVWHTROUDFP04 196055 4 65 $20.90 GVS-90 CPVC Faceplate (Round - Self Foam Back - Grey) 94GVGRYROUDFP02 197053 2 65 $15.40 94GVGRYROUDFP03 197054 3 65 $18.75 94GVGRYROUDFP04 197055 4 65 $21.70 GVS-65 PVC Faceplate (Rectangular - Self Foam Back - White) 94GVWHTRECTFP02 196216 2 65 $25.90 94GVWHTRECTFP025 196218 2½ 65 $25.90 94GVWHTRECTFP03 196219 3 65 $25.90 9

Gas Venting Solutions - Accessories Termination Vent Screens 99GV02SCREEN 196050 2 250 $3.25 99GV03SCREEN 196051 3 100 $8.40 99GV04SCREEN 196052 4 75 $9.95 99GV06SCREEN 196090 6 5 $17.25 99GV08SCREEN 196091 8 5 $20.70 Deburring Tools 99GVDEBTOOL01503 196049 1½ - 3 Pipe 6 $66.65 99GVDEBTOOL04 196048 4 Pipe 6 $80.20 10

Gas Venting Solutions - Cements GVS-65 PVC Solvent Cement (ULC S636 Listed for use with GVS-65 Products) RCC40-500ML 196040 475 ml 12 $12.60 RCC40-1LT 196041 950 ml 12 $21.00 GVS-65 PVC and GVS-90 CPVC Primer (ULC S636 Listed for use with GVS-65 and GVS-90 Products) RCP40-500ML 196042 475 ml (Purple) 12 $14.25 RCP40-1LT 196043 950 ml (Purple) 12 $22.80 RCP40CL-500ML 196017 475 ml (Clear) 12 $15.60 RCP40CL-1LT - 950 ml (Clear) 12 $26.25 GVS-65 and GVS-90 PVC/CPVC/ABS Transition Cement RCCABS-PVC500ML 196044 475 ml 12 $14.25 RCCABS-PVC1LT - 950 ml 12 $22.20 GVS-90 CPVC Solvent Cement (ULC S636 Listed for use with GVS-90 Products) RCC41-500ML 196046 475 ml 12 $19.00 RCC41-1LT 196047 950 ml 12 $38.00 Note: Royal Building Products Solvent Cements packaged in metal containers have a shelf-life of 24 months from the date of manufacture. Royal Building Products Primers and Cleaners packaged in metal containers have a shelf-life of 36 months from the date of manufacture. 11

12 Gas Venting Solutions - Notes

ROYAL GROUP, INC. TERMS AND CONDITIONS OF SALE THESE TERMS AND CONDITIONS APPLY TO THE SALE OF ANY PRODUCTS BY ROYAL GROUP, INC. OR ANY OF ITS SUBSIDIARIES OR AFFILIATED COMPANIES (COLLECTIVELY, SELLER ). ALL ORDERS ARE ACCEPTED AND ALL SALES ARE EXPRESSLY MADE CONDITIONAL ON PURCHASER S AGREEMENT TO THESE TERMS AND CONDITIONS NOTWITHSTANDING ANY PURCHASE ORDERS OR OFFERS CONTAINING DIFFERENT OR ADDITIONAL PROVISIONS. PURCHASER S ACCEPTANCE OF GOODS CONSTITUTES ACCEPTANCE OF THESE TERMS AND CONDITIONS AND ALSO PURCHASER S AGREEMENT THAT THEY CONTROL OVER ANY TERMS, CORRESPONDENCE OR FORMS SUPPLIED BY PURCHASER AT ANY TIME. ACCEPTANCE/CANCELLATION. Orders cannot be cancelled by Purchaser without Seller s written consent and are subject to change or price adjustment based on fluctuations in material price and availability. These Terms and Conditions are a final, complete and exclusive statement of the parties agreement. No statements or changes of any kind or any conflicting terms or conditions in any writing by Purchaser to Seller are binding on Seller unless specifically agreed to in writing by Seller. Prior statements, representations, and agreements not incorporated are excluded and superseded hereby. No course of prior dealings between Seller and Purchaser and no usage of trade shall be used to supplement any term in this agreement. Acceptance or acquiescence in a course of performance shall not be relevant to alter the meaning of this agreement. MODIFICATIONS MUST BE IN WRITING. These Terms and Conditions shall not be modified or rescinded by agreement or conduct or waived unless specifically agreed to in writing by Seller. The amount of any present or future sales, use, excise, or similar taxes, applicable to the ordered goods shall be added to Seller s price and paid by the Purchaser, unless the Purchaser timely provides Seller with a tax exemption certificate applicable to Seller. SHIPMENT/DELIVERY. Seller shall not be liable for any penalty or damages, liquidated or otherwise for any shipment delays. Unless otherwise stated by Seller, goods are shipped F.O.B. shipping point only; and all loss, damage and delay in transit are at the risk of the Purchaser. Unless otherwise stated by Seller, when goods have been delivered to a carrier, risk of loss passes to Purchaser and Seller s responsibility for delivery ends. Shipments should be examined carefully before being accepted from the carrier. Seller assumes no responsibility for damage after having received in good order receipts from a carrier at shipping point. Claims for shortages or non- conforming shipments must be made in writing and sent to Seller immediately upon Purchaser s receipt of the shipment (i.e., within 24 hours of Purchaser s receipt of the Shipment). Failure to give such notice shall be deemed unqualified acceptance of the Shipment, and a waiver by Purchaser of any claim with respect to the Shipment. TITLE TO GOODS. Purchaser acknowledges and agrees that until payment of the amount shown on Seller s invoice is received by Seller, title to the goods covered by that invoice shall remain with Seller, whether or not the goods are in the Seller s possession and whether or not they have been fabricated or used by the Purchaser. Until such payment has been made in full, Seller shall have the right to at any time without notice to enter the premises where the goods are situated and take possession of the same in the event that Purchaser s payment obligation for those goods has become past-due, and the Purchaser agrees to defend, indemnify and save Seller harmless from any and all costs, expenses and damages (including legal fees) arising out of any claim asserted against the Seller as a consequence to the Seller s exercise of such right. INSURANCE. The Purchaser agrees to keep the goods fully insured against loss, theft, destruction and damage (including where the same occurs while the goods are in the possession of the carrier that is transporting the goods or in the possession of a third-party warehouse) occurring at any point after Purchaser or Purchaser s carrier or other representative takes possession of the goods, which insurance shall be placed with insurance companies for the benefit of the Seller and the proceeds of any such insurance shall, at the option of the Seller, be applied to the payment due or becoming due at the time of such payment or applied toward the replacement of the goods and if the goods shall be replaced, then, and in such event the terms, provisions and conditions of this agreement shall apply to such replaced products with the same force and effect as if such replacement products had originally been the subject of this agreement. DEFAULT. If Purchaser defaults in paying by the specified due date any of the payments provided for in any invoice issued by Seller, or if a proceeding in bankruptcy, receivership or insolvency shall be instituted or filed by or against the Purchaser as a debtor, bankrupt, defendant or insolvent or if the Purchaser shall enter into any arrangement or agreement with its creditors, the full amount of the purchase price then remaining unpaid shall, at the option of the Seller be immediately due and payable, anything to the contrary in any other document or agreement notwithstanding, it being expressly agreed that the title in the goods shall vest in the Purchaser only on the payment of the full purchase price and on the compliance by the Purchaser with Purchaser s obligations under these terms and conditions. RETURNS. Unless Purchaser has been first obtained Seller s consent to accept goods for return or credit, Seller will not be required to accept returned goods from Purchaser. Risk of loss for returned goods will remain with Purchaser and Purchaser shall reimburse Seller for any cost Seller incurs in connection with the shipment and return of the goods. Goods fabricated to order (i.e., custom goods ) are not returnable under any circumstances except as part of a remedy pre-approved by Seller for a legitimate warranty claim. NON-PAYMENT/ ENFORCEMENT. Interest at the maximum legal rate not exceeding 18% per year shall be charged on overdue accounts at a rate of 1.5% per month. If an invoice is not paid when due, or it becomes necessary for Seller to enforce these terms and conditions, Purchaser agrees to pay all costs of collection, or enforcement or both, including attorney s fees, whether incurred in or out of court, or appeal, in arbitration, in a bankruptcy proceeding, or in any insolvency proceedings. PENALTY CLAUSES. Seller assumes no liability arising from penalty or liquidated damage clauses of any kind, written or implied. LIMITED WARRANTY/SOLE REMEDY. SELLER WARRANTS THAT IT HAS GOOD TITLE TO THE GOODS SOLD BY IT AND THAT THE GOODS CONFORM TO ANY WRITTEN SPECIFICATIONS OR DESCRIPTIONS ISSUED BY SELLER FOR THOSE GOODS, OR AGREED UPON IN WRITING BETWEEN SELLER AND BUYER. SELLER S ENTIRE LIABILITY TO PURCHASER IS LIMITED TO THE PURCHASE PRICE OF THE GOODS IN RESPECT OF WHICH A CLAIM IS MADE AND COSTS OF TRANSPORT. IF GOODS SOLD TO PURCHASER FAIL TO CONFORM TO THIS LIMITED WARRANTY, PURCHASER MUST GIVE SELLER WRITTEN NOTICE OF SUCH NONCONFORMANCE (A)WITHIN 30 DAYS OF THE TIME WHEN THE DEFECT WAS OR SHOULD HAVE BEEN DISCOVERED, BUT (B) NOT LATER THAN SIXTY DAYS AFTER THE RECEIPT OF THE GOODS IN ANY EVENT, OR PURCHASER WAIVES ANY WARRANTY CLAIM OR OTHER CLAIM WITH RESPECT TO THE GOODS. SELLER S ENTIRE LIABILITY (AND PURCHASER S ENTIRE REMEDY) ON ANY CLAIM ARISING OUT OF THE SALE OF THE GOODS OR ITS REPLACEMENT OF DEFECTIVE GOODS, WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHERWISE, SHALL BE LIMITED TO THE PURCHASE PRICE OF THE GOODS THAT ARE PROVEN DEFECTIVE AND COSTS OF TRANSPORT. THIS WARRANTY DOES NOT EXTEND TO, AND IS VOIDED BY, GOODS DAMAGED OR FAILED BECAUSE OF, OR BY USE WITH, MATERIALS OR SUPPLIES OR METHODS NOT APPROVED BY SELLER OR OTHER APPLICABLE INSTALLATION STANDARDS OR CODES; OR BECAUSE OF MISUSE; ABUSE; ACCIDENT DAMAGE IN TRANSIT; IMPROPER HANDLING OR INSTALLATION NOT IN ACCORDANCE WITH RECOMMENDED PRACTICES OR CODES; OR RESULTING CONSEQUENCES. MOLD, WELD OR FUSION LINES ARE NOT DEFECTS OR NON- CONFORMITIES. Continued on next page. General Terms and Conditions 13

General Terms and Conditions PURCHASER AGREES THAT NEITHER SELLER NOR SELLER S OFFICERS, DIRECTORS, MANAGERS, EMPLOYEES, AGENTS, DISTRIBUTORS OR REPRESENTATIVES SHALL UNDER ANY CIRCUMSTANCES BE LIABLE (A) FOR ANY OTHER DAMAGES, DIRECT, INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL, WHETHER RESULTING FROM SELLER S NEGLIGENCE OR OTHERWISE, RESULTING FROM OR IN CONNECTION WITH THE GOODS SOLD TO PURCHASER, NOR (B) FOR ANY CLAIMS, ACTIONS, SUITS AND PROCEEDINGS WHICH MAY BE INSTITUTED IN RESPECT TO THE FOREGOING, INCLUDING CLAIMS, ACTIONS, SUITS AND PROCEEDINGS MADE BY SUBSEQUENT OWNERS AND USERS OF THE GOODS, NOR FOR STRICT LIABILITY OR OTHER TORT, NOR (C) FOR LOST REVENUES OR EARNINGS, LOST PROFITS, LOST OPPORTUNITIES, COSTS OR DELAYS, LOST GOOD WILL OR REPUTATION, OR PUNITIVE OR EXEMPLARY DAMAGES. IF IT IS FOUND THAT THIS REMEDY FAILS OF ITS ESSENTIAL PURPOSE, SELLER S LIABILITY SHALL NONETHELESS BE LIMITED TO A REFUND OF THE PURCHASE PRICE PAID, AND TRANSPORTATION COSTS. THE EXCLUSION OF CONSEQUENTIAL DAMAGES SHALL BE DEEMED INDEPENDENT OF, AND SHALL SURVIVE ANY FAILURE OF THE ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. SELLER SHALL HAVE THE RIGHT TO MODIFY AT ANY TIME THE DESIGN OF PRODUCTS OR MATERIALS USED THEREIN WITHOUT ANY LIABILITY, EXCEPT TO THE EXTENT THAT ANY SUCH MODIFICATION WOULD BE A BREACH OF ANY SPECIFICATIONS OR DESIGN REQUIREMENTS THAT HAVE BEEN AGREED UPON IN WRITING BETWEEN SELLER AND PURCHASER. SELLER RESERVES THE RIGHT TO DISCONTINUE THE MANUFACTURE AND SELLING OF ANY PRODUCT AT ANY TIME, EXCEPT TO THE EXTENT THAT DECISION WOULD BREACH ANY WRITTEN AGREEMENT BETWEEN SELLER AND PURCHASER FOR SELLER TO SUPPLY PURCHASER WITH A FIXED QUANTITY OR VOLUME OF THAT PRODUCT, AND SELLER HAS NOT YET SATISFIED THAT QUANTITY OR VOLUME. EXCLUSIONS OF WARRANTY AND LIMITATION OF LIABILITY AND REMEDIES. SELLER MAKES NO WARRANTY OTHER THAN THE LIMITED WARRANTY GIVEN ABOVE, WHICH IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY SELLER. THIS LIMITED WARRANTY AND REMEDY IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY STATUTORY WARRANTIES, AND EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PURCHASER S PURCHASE OF THE GOODS IS IRREVOCABLE PURCHASER HAS DECIDED THAT THE STANDARD OF THE GOODS IS FIT FOR PURCHASER S PURPOSE. PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING THE SUITABILITY FOR USE OR APPLICATION OF ANY GOODS, INCLUDING COMPONENTS THEREOF, OR WHETHER SUCH GOODS MEET REQUIREMENTS OF APPLICABLE BUILDING CODES OR SAFETY CODES FOR SPECIFIC APPLICATIONS. THE WARRANTIES OF SELLER ARE NOT TRANSFERRABLE TO ANY SUBSEQUENT OWNER OF THE GOODS. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THAT THE ABOVE MAY NOT APPLY TO YOU. CONDITIONS OF RESALE/SUBSEQUENT PURCHASERS. These Terms and Conditions shall be binding upon all subsequent owners and users of the goods. Goods are sold subject to the condition that they shall not be resold or otherwise conveyed without similar conditions, including that these conditions be imposed on the subsequent purchaser/ user or transferee. CREDIT INQUIRIES. Purchaser authorize Seller to make inquiries and to receive information about Purchaser s credit experience from others, to enter this information in Purchaser s file. POWER OF ATTORNEY. Purchaser hereby irrevocably authorizes and empowers any attorney of any court of record to appear for and confess judgement and therein against the Purchaser, or any of them, for the amount for which the Purchaser may be or become liable to Seller under these Terms and Conditions as evidenced by an affidavit signed by a representative of the Seller setting forth the amount then due, plus 15% thereof, but no less than $500.00, as an attorney s commission, with costs of suit, release of errors, and without right of appeal. If a copy hereof, verified by an affidavit, shall have been filed in said proceeding, it shall not be necessary to file the original as a warrant of attorney. Purchaser waives the right to any stay of execution and the benefit of all exemption laws now or hereafter in effect. No single exercise of the forgoing warrant and power to confess judgement shall be deemed to exhaust the power, whether or not any such exercise shall be held by any court to be invalid, voidable, or void, but the power shall continue undiminished and may be exercised from time to time as often as Seller shall elect, until all sums payable or that may become payable by Purchaser have been paid in full. NO ASSIGNMENT. These terms and conditions are not assignable by Purchaser but shall be binding upon and inure to the benefit of the parties hereto and their respective successors. HEADINGS. The section headings used herein are for convenience of reference only and do not form a part of these terms and conditions, and no construction or inference shall be derived therefrom. FORCE MAJEURE. Seller shall not be responsible for any loss or damage of any kind or nature whatsoever, direct or indirect, suffered by Purchaser, subsequent purchasers, ultimate users of goods, or any other person, as a result of any factors beyond its control, including (without limitation) Purchaser s acts or omissions, labor shortages, strikes, lock-outs, work slowdowns, accidents, fire, floods, earthquakes, severe weather, serious accidents, epidemics, quarantines, wars, breakdowns, delays in manufacture, transportation or delivery of goods or materials purchased by Seller, unavailability, inadequacy or shortages of material or services, acts of God, embargoes, wars, insurrections or riots, terrorism, acts of civil or military authorities, civil commotion, or governmental or regulatory or licensing action or changes, or any other circumstances beyond Seller s reasonable control. SEVERABILITY. Invalidity of part of any of these Terms and Conditions shall not invalidate the remainder and the Purchaser and Seller agree to amend these Terms and Conditions to substitute for the provision at issue a valid, legal and enforceable provision as similar as possible to the provision at issue and to otherwise give effect to the provision at issue as much as possible. LANGUAGE. The following statement is translated in English to At the express request of the parties, this agreement has been prepared in the English language and is applicable only if either or both of Purchaser or Seller are located in Canada. A la demande des parties aux présentes, cette convention a été préparée dans la langue anglaise. CHOICE OF LAW AND BINDING ARBITRATION. This agreement and all Terms and Conditions shall be construed and governed by the laws of the State (if Seller is located in the United States of America) or Province (if Seller is located in Canada) in which Seller s head office is located. The United Nations Convention on Contracts for the International Sale of Goods does not apply. Except as provided under the NON-PAYMENT / ENFORCEMENT and POWER OF ATTORNEY sections herein, any claim, dispute or controversy (whether in contract or tort, pursuant to statute or regulation, or otherwise and whether pre-existing, present or future) arising out of or relating to: these terms and conditions; a good or service; oral or written statements, or advertisements or promotions relating to these terms and conditions or to a good or service; or the relationships which result from these terms and conditions (including relationships with third parties who are not signatories to this agreement) (each, a Claim ), will be referred to and determined by binding arbitration (to the exclusion of the courts). By so agreeing, you waive any right you may have to commence or participate in any class action against us related to any Claim and, where applicable, you hereby agree to opt out of any class proceeding against us otherwise commenced. By so agreeing, you further expressly waive any right to a jury trial regarding disputes related to this agreement or to any Claim. Arbitration shall occur in the city in which Seller s head office is located by one arbitrator under the rules of the American Arbitration Association; and judgment may be rendered upon the award made by a court of the city in which Seller s head office is located, or a court of competent jurisdiction. ALERT LINE: Axiall Corporation maintains a toll free number where legal and ethical concerns may be reported confidentially. That number is 1-877-692-5929. 14

LIMITED WARRANTY/SOLE REMEDY: SELLER WARRANTS THAT IT HAS GOOD TITLE TO THE GOODS SOLD BY IT AND THAT THE GOODS CONFORM TO ANY WRITTEN SPECIFICATIONS OR DESCRIPTIONS ISSUED BY SELLER FOR THOSE GOODS, OR AGREED UPON IN WRITING BETWEEN SELLER AND BUYER. SELLER S ENTIRE LIABILITY TO PURCHASER IS LIMITED TO THE PURCHASE PRICE OF THE GOODS IN RESPECT OF WHICH A CLAIM IS MADE AND COSTS OF TRANSPORT. IF GOODS SOLD TO PURCHASER FAIL TO CONFORM TO THIS LIMITED WARRANTY, PURCHASER MUST GIVE SELLER WRITTEN NOTICE OF SUCH NONCONFORMANCE (A)WITHIN 30 DAYS OF THE TIME WHEN THE DEFECT WAS OR SHOULD HAVE BEEN DISCOVERED, BUT (B) NOT LATER THAN SIXTY DAYS AFTER THE RECEIPT OF THE GOODS IN ANY EVENT, OR PURCHASER WAIVES ANY WARRANTY CLAIM OR OTHER CLAIM WITH RESPECT TO THE GOODS. SELLER S ENTIRE LIABILITY (AND PURCHASER S ENTIRE REMEDY) ON ANY CLAIM ARISING OUT OF THE SALE OF THE GOODS OR ITS REPLACEMENT OF DEFECTIVE GOODS, WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHERWISE, SHALL BE LIMITED TO THE PURCHASE PRICE OF THE GOODS THAT ARE PROVEN DEFECTIVE AND COSTS OF TRANSPORT. THIS WARRANTY DOES NOT EXTEND TO, AND IS VOIDED BY, GOODS DAMAGED OR FAILED BECAUSE OF, OR BY USE WITH, MATERIALS OR SUPPLIES OR METHODS NOT APPROVED BY SELLER OR OTHER APPLICABLE INSTALLATION STANDARDS OR CODES; OR BECAUSE OF MISUSE; ABUSE; ACCIDENT DAMAGE IN TRANSIT; IMPROPER HANDLING OR INSTALLATION NOT IN ACCORDANCE WITH RECOMMENDED PRACTICES OR CODES; OR RESULTING CONSEQUENCES. MOLD, WELD OR FUSION LINES ARE NOT DEFECTS OR NON- CONFORMITIES. PURCHASER AGREES THAT NEITHER SELLER NOR SELLER S OFFICERS, DIRECTORS, MANAGERS, EMPLOYEES, AGENTS, DISTRIBUTORS OR REPRESENTATIVES SHALL UNDER ANY CIRCUMSTANCES BE LIABLE (A) FOR ANY OTHER DAMAGES, DIRECT, INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL, WHETHER RESULTING FROM SELLER S NEGLIGENCE OR OTHERWISE, RESULTING FROM OR IN CONNECTION WITH THE GOODS SOLD TO PURCHASER, NOR (B) FOR ANY CLAIMS, ACTIONS, SUITS AND PROCEEDINGS WHICH MAY BE INSTITUTED IN RESPECT TO THE FOREGOING, INCLUDING CLAIMS, ACTIONS, SUITS AND PROCEEDINGS MADE BY SUBSEQUENT OWNERS AND USERS OF THE GOODS, NOR FOR STRICT LIABILITY OR OTHER TORT, NOR (C) FOR LOST REVENUES OR EARNINGS, LOST PROFITS, LOST OPPORTUNITIES, COSTS OR DELAYS, LOST GOOD WILL OR REPUTATION, OR PUNITIVE OR EXEMPLARY DAMAGES. IF IT IS FOUND THAT THIS REMEDY FAILS OF ITS ESSENTIAL PURPOSE, SELLER S LIABILITY SHALL NONETHELESS BE LIMITED TO A REFUND OF THE PURCHASE PRICE PAID, AND TRANSPORTATION COSTS. THE EXCLUSION OF CONSEQUENTIAL DAMAGES SHALL BE DEEMED INDEPENDENT OF, AND SHALL SURVIVE ANY FAILURE OF THE ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. SELLER SHALL HAVE THE RIGHT TO MODIFY AT ANY TIME THE DESIGN OF PRODUCTS OR MATERIALS USED THEREIN WITHOUT ANY LIABILITY, EXCEPT TO THE EXTENT THAT ANY SUCH MODIFICATION WOULD BE A BREACH OF ANY SPECIFICATIONS OR DESIGN REQUIREMENTS THAT HAVE BEEN AGREED UPON IN WRITING BETWEEN SELLER AND PURCHASER. SELLER RESERVES THE RIGHT TO DISCONTINUE THE MANUFACTURE AND SELLING OF ANY PRODUCT AT ANY TIME, EXCEPT TO THE EXTENT THAT DECISION WOULD BREACH ANY WRITTEN AGREEMENT BETWEEN SELLER AND PURCHASER FOR SELLER TO SUPPLY PURCHASER WITH A FIXED QUANTITY OR VOLUME OF THAT PRODUCT, AND SELLER HAS NOT YET SATISFIED THAT QUANTITY OR VOLUME. EXCLUSIONS OF WARRANTY AND LIMITATION OF LIABILITY AND REMEDIES. SELLER MAKES NO WARRANTY OTHER THAN THE LIMITED WARRANTY GIVEN ABOVE, WHICH IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY SELLER. THIS LIMITED WARRANTY AND REMEDY IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY STATUTORY WARRANTIES, AND EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PURCHASER S PURCHASE OF THE GOODS IS IRREVOCABLE PURCHASER HAS DECIDED THAT THE STANDARD OF THE GOODS IS FIT FOR PURCHASER S PURPOSE. PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING THE SUITABILITY FOR USE OR APPLICATION OF ANY GOODS, INCLUDING COMPONENTS THEREOF, OR WHETHER SUCH GOODS MEET REQUIREMENTS OF APPLICABLE BUILDING CODES OR SAFETY CODES FOR SPECIFIC APPLICATIONS. THE WARRANTIES OF SELLER ARE NOT TRANSFERRABLE TO ANY SUBSEQUENT OWNER OF THE GOODS. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THAT THE ABOVE MAY NOT APPLY TO YOU. Royal Building Products continuously strives to make product advancements through ongoing research and development. As such, the information contained in this literature is subject to change without notice. Although every effort has been made to provide accurate and reliable information in this literature, it is possible that errors may have occurred in the information published. Royal Building Products disclaims responsibility for any errors and the accuracy of any product specifications, pricing, data and information contained in this literature. The warranty for our products is set out in our terms and conditions of sale. In that warranty we warrant that the goods sold by us are of merchantable quality. Please visit our website to see our complete terms and conditions at: www.royalbuildingproducts.com/terms-conditions/ royalplumbingca.com Printed 01.2015