Scientific Research Publications [Updated May 2015] Jonathan C. BORG

Scientific Research Publications [Updated May 2015] Jonathan C. BORG

PUBLICATIONS Books February 2004 Borg J.C., Farrugia P.J., Camilleri K.P. Knowledge Intensive Design Tools published by Kluwer Academic Publishers, USA, ISBN 1-4020-7732-7. May 2007 Catalin Gheorghe Amza, Jonathan C. Borg, Antanas Lenkevicius Training for ECDL CAD Certification, Editura Printech, Bucuresti, ISBN 978-973-718-668-3 May 2007 Catalin Gheorghe Amza, Jonathan C. Borg, Antanas Lenkevicius Training voor het Europese CAD certificaat, Editura Printech, Bucuresti, ISBN 978-973-718-733-8 May 2007 Catalin Gheorghe Amza, Jonathan C. Borg, Antanas Lenkevicius ECDL CAD sertifikavimas, Isleido leidkykla Technologija, Kaunas, Lithuania, ISBN 978-9955-25-250-4 May 2007 Catalin Gheorghe Amza, Jonathan C. Borg, Antanas Lenkevicius Instruire pentru certificarea ECDL CAD, ISBN 978-973-718-733-8 May 2007 Catalin Gheorghe Amza, Jonathan C. Borg, Antanas Lenkevicius Formazione professionale per la certificazaione europa CAD, ISBN 978-973- 718-733-8 2010 Catalin Gheorghe Amza, Jonathan C. Borg, Dainius Dulinskas, Constantin Radu Training for ECDL CAD 3D Certification,, ISBN 978-606-521-517-78 Journal Publications 1997 Borg J., Bonello P. and Ciantar C. Computer Aided Design and Manufacture of Automatic Lathe Cams in Computers In Industry, Vol. 34 (1997) pages 11-26, published by Elsevier Science. 1999 Borg J.C., Yan X.T. & Juster N.P. Guiding Component Form Design Using Decision Consequence Knowledge Support in Journal of Artificial Intelligence in Engineering Design and Manufacture, Vol.13 p.p. 387-403 2000 Borg J.C., Yan X.T. & Juster N.P. Exploring Decisions Influence on Life-Cycle Performance To Aid Design For Multi-X in the special issue of the Journal of Artificial Intelligence in Engineering Design and Manufacture on Life-Cycle Design Vol. 14 p.p. 91-113. 2001 Yan X.T., Borg J.C., & Juster N.P Concurrent modeling of components and realization systems to support proactive design for manufacture/assembly in the Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, Vol 215, pp 1135 1141. September 2001. 2005 P. J. Farrugia, J. C. Borg, K.P. Camilleri, F. Giannini, Xiu T. Yan Extracting 3D shape models and related life knowledge from paper-based sketches in the special issue of the International Journal of Computer Applications in Technology (IJCAT) on Models and methods for representing and processing shape semantics", Vol. 23, Issue (2/3/4), pp.120-137. 2007 Farrugia P.J., Borg J.C., Yan X.T., Camilleri K. P., and Green G., (2007) "A Sketching Alphabet for Paper-based Collaborative Design", in Journal of Design Research (JDR), 1748-3050, special issue on Fostering Innovation During Early Informal Design Phase. Volume 6, Number 1-2/2007 pp. 260-288. 2007 Bartolo A., McGuire P. C., Camilleri, K. P., Spiteri C. L., Borg J.C., Farrugia P.J., Ormo J., Gomez-Elvira J., Rodriguez-Manfredi J.A., Diaz-Martinez E., Ritter H., Haschke R., Oesker M., Ontrup J. (2007) "The Cyborg Astrobiologist: Porting from a wearable computer to the Astrobiology Phone-cam", International Journal of Astrobiology. 2010 M. A. Saliba, A. Vella Zarb and J. C. Borg, "A Modular, Reconfigurable End Effector for the Plastics Industry " Assembly Automation, Vol. 30, Issue 2, 2010 2010 Spiteri, Christopher L., and Jonathan C. Borg. "System architecture for mobile Knowledge Management within product life-cycle design." International Journal of Manufacturing Research 5.4 (2010): 396-412. 2011 Farrugia, Philip, Franklin Balzan, and Jonathan C. Borg. "A Global Collaborative Design Framework For Sketch-Based Parametric CAD Modelling." International Journal of Product Development Vol.13.No. 1 (2011): 16-37. Curriculum Vitae of Jonathan C. BORG Page 6 of 21

2014 Farrugia Philip, Borg Jonathan, Camilleri Kenneth "A Language for Representing & Extracting 3D Geometry Semantics from Paper-based Sketches" Journal of Visual Languages and Computing Book Chapter Publications September 1996 Borg J. and K.J., MacCallum. (1996). Structuring Knowledge of Life-Cycle Consequences for Supporting Concurrent Design Exploration. in Chapter 13, Knowledge Intensive CAD Vol.2 edited by Martti Mantyla, Susan Finger et al., published by Chapmann & Hall, ISBN 0-412-81450-1, pg.208-223. December 1998 December 2002 Borg J., X.T. Yan and N.P.Juster. A KICAD Tool For Pro-Active Exploration Support To 'Design Synthesis for Multi-X, in Chapter 14, Knowledge Intensive Computer Aided Design, edited by Susan Finger, Tetsuo Tomiyama et al., published by Kluwer Academic Publishers, ISBN 0-7923-8694-9, pg. 274-295. Borg J. C., Yan X. and Juster N.P. A Framework for Knowledge Intensive "Artefact Life" Design in Chapter 6 of the book Knowledge Intensive CAD edited by Umberto Cugini and Michael Wozny, published by Kluwer Academic Publishers, ISBN 0-7923-7619-6, pg.75-87. 2003 Borg J.C. and Giannini Franca. Exploiting Integrated Product & Life-Phase Features. Chapter 1 in Feature Based Product Life-Cycle Modelling, edited by René Soenen, Gustav J. Olling - Kluwer Academic Publishers, ISBN 1-4020- 7327-5. pg. 1-18. 2004 Yan, X. T., Rehman, F., & Borg, J. C. (2004). Design Context Knowledge Based Proactive Support For Component Design. Knowledge Intensive Design Technology, 136-169 2004 P.J. Farrugia, J.C. Borg, K.P. Camilleri, D. Scicluna, Xiu T.Yan, J. Muscat. Knowledge Intensive `Paper-based' Form Sketching in Knowledge Intensive Design Tools published by Kluwer Academic Publishers, USA, ISBN 1-4020- 7732-7. 2007 Borg Jonathan C., An Insight Into Design-led Innovation in Creative Thinking - Designing Future Possibilities edited by Dingli S. (ISBN 978-99909-45-41-6), Malta University Press, 2007 pg 10-17. 2007 Bartolo, Alexandra, Tracey Cassar, Kenneth P. Camilleri, Simon G. Fabri, and Jonathan C. Borg. "Image Binarisation using the Extended Kalman Filter." In Informatics in Control, Automation and Robotics II, pp. 153-162. Springer Netherlands, 2007. Refereed Conference / Workshop Proceedings January 1992 November 1993 Databases for Water Resources Management, a paper included in the UNEP course material of the course held in Valletta, Malta, in conjunction with the Water Works Department. "The Use of Databanks in the Malta Aquifer Studies Project, a paper included in the UNEP course Water Resources Management and Conservation, held in conjunction with the Institute of Water Technology, Malta. July 1995 Borg J., MacCallum K.J. A HyperCAD Expert System For Plastic Product Design in Proceedings of the 3rd International Conference, Computer Integrated Manufacturing, Volume 1, edited by Winsor J., Sivakumar A L and Gay R. Published by World Scientific, Singapore. pg.295-302. August 1997 Borg J. and MacCallum K.J. (1997). A Life-Cycle Consequences Model Approach To The Design For Multi-X of Components, in Proceedings of the 11th International Conference on Engineering Design (ICED97), Volume 2, edited by Riitahuhta A. Published by Tampere University of Technology. Pg. 647-652. December 1997 Ion W.J. & Borg. J. Integrated Product Development For the Environment, Proceedings Of the 5 th Malta Environmental Conference. Curriculum Vitae of Jonathan C. BORG Page 7 of 21

22 April 1998 Borg J. and X.T. Yan. Design Decision Consequences: Key to Support for 'Design for Multi-X', Proceedings of the 2 nd International Symposium on Tools & Methods for Concurrent Engineering, held in Manchester, UK, 21-23 April, 1998. Pg. 169-184. August 1999 December 99 May 2000 Borg J.C., Yan X.T. and Juster N.P. Exploiting Decision Consequences To Support Design for Multi-X. Research paper included in the proceedings of the 12 th International Conference on Engineering Design (ICED99) held in Munich, Germany. 24-26 th August 1999. Volume 1, pp.473-476. Borg J.C. Concurrent Design Utilizing Product Life-Cycle Consequence Knowledge. Paper presentation at the Workshop on Innovative Tools in Product Development Life Cycle, IMA Consiglio Nazionale Delle Ricerche, Genova, Italy, 2-3 December 1999. Borg J.C., Yan X.T. and Juster N.P. A Framework For Knowledge Intensive Artefact Life Design. Research paper included in the proceedings of the 4 th IFIP WG5.2 Workshop on Knowledge Intensive CAD being held in Parma, Italy., pp. 88-100. 5 Sep 2000 Borg J.C., Cutajar Kinsella G., Towards Intelligent CAD for Wear Control. Keynote research paper included in the proceedings of the TED2000 conference organized by the Institution of Mechanical Engineers and held at Bournemouth University UK. 7 Sep 2000 Borg J.C., Yan X.T. and Juster N.P. Knowledge Intensive CAD of Thermoplastic Components. Research paper presented in the IMTS2000 Manufacturing Conference organized by the Society of Manufacturing Engineers (SME) held in Chicago, Illinois, USA (on CD-ROM). 10-13 Sep 2000 Yan X.T., Borg J.C., and Juster N.P. A Proactive Approach To Integrated Synthesis of Components and Realization Systems. Research paper presented at the 5 th Design For Manufacture Conference organized by the American Society of Mechanial Engineers (ASME) held in Baltimore, Maryland, USA (on CD-ROM). 12-14 June 2001 Borg J.C. and Giannini Franca. Exploiting Integrated Product & Life-Phase Features. Plenary research paper presented & included in the proceedings (CD- ROM) of the IFIP & IEEE Conference on Feature Modeling and Advanced Design-For-The-Life-Cycle Systems held in Valenciennes, France. 21-23 Aug 2001 Borg J.C., Camilleri K.P., Farrugia P., Giannini F. and Muscat J. Towards Sketch 3D Prototyping For Aiding Conceptual Form Design. In Proceedings of the 13th International Conference on Engineering Design (ICED01), Glasgow, UK, pp. 445-452. 21-23 Aug 2001 Yan X.T., Borg J.C., Rehman F. Scaling-up Domain Knowledge Representation In The Development of Knowledge Intensive CAD For Proactive Design For Manufacture. In Proceedings of the 13th International Conference on Engineering Design (ICED01), Glasgow, UK, pp. 219-226. 23-25 July 2002 Farrugia P., Borg J.C., Camilleri K.P., Scicluna D., Yan X.T, Muscat J. Knowledge Intensive Paper-based Form Sketching Research paper included in the pre-prints of the 5 th IFIP WG 5.2 workshop on Knowledge Intensive CAD held in Malta, 23-25 th July 2002, pp 82-98. 23-25 July 2002 Xiu-Tian Yan, Fayyaz Rehman, Borg Jonathan C. FORESEEing Design Solution Consequences using Design Context Information- Research paper included in the pre-prints of the 5 th IFIP WG 5.2 workshop on Knowledge Intensive CAD held in Malta, 23-25 th July 2002, pp 18-33. 14-16 Aug 2002 Borg J.C., Farrugia P., Camilleri K.P., Scicluna D., Yan X.T Paper Sketch based Design for Multi-X paper included of the NordDesign 2002 Conference Proceedings, held in Trondheim, Norway. pp. 17-24. Paper received the Best Poster award. 19-21 Aug 2003 Borg J.C., Farrugia P., Camilleri K.P., Giannini F, Yan X.T, Scicluna D., Why CAD Tools Benefit from a Sketching Language paper included of the proceedings of the 14 th International Conference on Engineering Design held in Stokholm, Sweeden (ISBN 1-904670-00-8), pp 141-142. Curriculum Vitae of Jonathan C. BORG Page 8 of 21

9-11 Sep 2003 M G Micallef, J Borg, C Ciantar, V Cassar Prototype of an In-Flight Service Trolley for Segregation of Cabin Waste presented at the International Symposium Advances In Waste Management And Recycling held at the University of Dundee (UK). pp 9 11. 5-7 April 2004 F. Rehman, X. T. Yan and J C Borg, Conceptual Design Decision Making Using Design Context Knowledge. Proceedings of the 5 th International conference on Integrated Design & Manufacturing in Mechanical Engineering, ed. By A N Bramley, S J Culley, E A Dekoninck, C A McMahon, A J Medland, A R Mileham, L B Newnes and G W Owen, pp107. ISBN 1 857901290, Bath, 5-7 April 2004. 30-31 Aug 2004 Philip J. Farrugia, Jonathan C. Borg, Kenneth P. Camilleri, Christopher Spiteri, Alexandra Bartolo A Cameraphone-Based Approach for the Generation of 3D Models from Paper Sketches in Proceedings of the Eurographics 2004 Workshop on Sketch-based Interfaces and Modeling, Grenoble, France, ISSN 1812-3503, pp. 32-42. 30-31 Aug 2004 Alexandra Bartolo, Kenneth P. Camilleri, Philip J. Farrugia and Jonathan C. Borg, Adaptation of Brensen's Thresholding Algorithm for Sketched Line Drawing in Proceedings of the Eurographics 2004 Workshop on Sketch-based Interfaces and Modeling, Grenoble, France, ISSN 1812-3503, pp. 81-90. August 2005 Farrugia P., Borg J.C., Camilleri K., Spiteri C., Experiments with a Cameraphone-Aided Design (CpAD) System in Proceedings of the 15 th International Conference on Engineering Design being held in Melbourne, Australia, pp. 130-131. 14-17 Sep 2005 Bartolo A., Cassar T., Camilleri K.P., Fabri S.G., Borg J.C. (2005), "Image Binarisation Using the Extended Kalman Filter", in Proceedings of the 2nd International Conference on Informatics in Control, Automation and Robotics (ICINCO), Barcelona, Spain, September 2005, pp. 160-167. October 2005 May 2006 May 2006 May 2006 August 2006 August 2006 August 2006 September 2006 Fenech O.C., Borg J. C., (2005), Design of Aesthetically Appealing Hermetic Cases in Proceedings of the 1 st International Conference on Design Engineering and Science (ICDES05), Vienna, Austria, pp. 81-86. Fenech O.C., Borg J.C., "A sensation based model of product elicited emotions", 5 th International Conference on Design and Emotion 2006 (DE2006), Gothenburg, Sweden. p. 27. Fenech O.C., Borg J.C., (2006), "A model of human sensations as a basis for design for product-emotion support", Proceedings of 9 th International Design Conference - DESIGN 2006, Dubrovnik, Croatia, pp. 705-712. Spiteri C.L., Borg J.C., Towards a conceptual framework for mobile Knowledge Management Support, in Proceedings of 9 th International Design Conference - DESIGN 2006, Dubrovnik, Croatia, May 2006, pp.1259-1266. Fenech O.C., Borg J.C., "Towards a sensory approach for designing pleasurable user-product experiences", in Proceedings of NordDesign 2006 Conference, Reykjavik, Iceland, pp. 223-228. Spiteri C.L., Borg J.C., "Investigating mobile Knowledge Management support in Engineering Design - an empirical study", in Proceedings of NordDesign 2006 Conference, Reykjavik, Iceland, August 2006, pp.148-157. Farrugia P.J., Borg J.C., Camilleri K.P., Bartolo A. and Restrepo J., An evaluation of a language for paper-based form sketching, in Proceedings of the NordDesign 2006 Conference Reykjavik, Iceland, pp. 287 297. Bartolo A., Camilleri K.P., Farrugia P.J., Borg J.C. (2006), "A New Sketch Based Interface using the Gray-level Co-occurrence Matrix for Perceptual Simplification of Paper Based Scribbles", Proceedings, Eurographics Workshop on Sketch-Based Interfaces and Modeling, Vienna, Austria, pp. 91 98. Curriculum Vitae of Jonathan C. BORG Page 9 of 21

August 2007 Bartolo A., Camilleri K.P., Fabri S. G., Borg J.C., Farrugia P.J, "Scribbles to Vectors: Preparation of Scribble Drawings for CAD Interpretation", in Proceedings of the EUROGRAPHICS Workshop on Sketch-Based Interfaces and Modeling 2007, California, USA. August 2007 Farrugia Philip, J., Borg Jonathan, C., Yan, X. T., & Camilleri Kenneth, P. (2007). Drawing Standards for Early Design: Where Do We Stand?. In Proceedings of the 16th International Conference on Engineering Design (ICED07) (pp. 119-120). August 2007 August 2007 January 2008 Vella, P., Grech, A. K., Borg, J. C., Spiteri, D., & Randich, J. (2007, September). Design for Micro Milling Guidelines. In Proceedings of the International Conference on Engineering Design, Paris, France. Fenech Olivier, C, Borg, J. C. "Exploiting Emotions for Successful Product Design." In Proceedings of the 16th International Conference on Engineering Design (ICED07) Paris, France, pp. 825-826. 2007. Spiteri C.L., Borg J.C. (2008) "Mobile Knowledge Management for Product Life- Cycle Design", in Proceedings of the International Conference in Integrated Paper-based Sketching and Collaborative Parametric 3D Modelling", in Chapter 2 'Engineering Knowledge Management and Design for X', Global Design to Gain a Competitive Edge - An Holistic and Collaborative Design Approach based on Computational Tools, edited by Yan X.T., Eynard B., and Ion W.J., Springer Publishers, pp.137-146. 2008 Bartolo A., Farrugia P.J., Camilleri K.P., and Borg J.C. (2008) "A Profile-driven Sketching Interface for Pen-and-Paper Sketches" in workshop on Sketch Tools for diagramming, Herrshing am Ammersee, Germany. January 2008 Mar 2008 Balzan F., Farrugia P.J., and Borg J. C. (2008) "Integrated Paper-based Sketching and Collaborative Parametric 3D Modelling", in Chapter 7 'Collaborative and Creative Product Development and Manufacture', Global Design to Gain a Competitive Edge - An Holistic and Collaborative Design Approach based on Computational Tools, edited by Yan X.T., Eynard B., and Ion W.J., Springer Publishers, pp.855-864. Bartolo, A., Camilleri, K. P., Fabri, S. G., & Borg, J. C. (2008, March). Line tracking algorithm for scribbled drawings. In Communications, Control and Signal Processing, 2008. ISCCSP 2008. 3rd International Symposium on (pp. 554-559). IEEE. 2008 Grech, A,K. and Borg, J.C., (2008) "Towards Knowledge Intensive Design Support for the Micro Surgical Domain", Proceedings of the Design 2008 10th International Design Conference, Dubrovnik, Croatia, edited by Marjanovic, D., Storga, M., Pavkovic, N. And Bojcetic, N., vol.1, p. 627-634, ISBN: 978-953- 6313-90-7. August 2008 Saliba M.A., Amato A., Borg J.C. and Alamango K. (2008) Parts Presentation and Handling for Packaging - Case Study: Conceptualisation and Prototyping of a Flexible Mechanism for the Placing of Plastic Valves into Pouches in Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008), Sweden. 2008 Grech, A,K. and Borg, J.C.,(2008). "Micro Surgical Design Knowledge Organisation", Proceedings of NordDesign 2008 conference, Tallinn, Estonia, edited by Roosimolder, L.,TUT Press, p.49-58, ISBN: 978-9985-59-840-5. 2008 Bartolo, A., Camilleri, K. P., Fabri, S. G., & Borg, J. C. (2008, June). Paperbased scribble simplification: where do we stand?. In Proceedings of the Fifth Eurographics conference on Sketch-Based Interfaces and Modeling (pp. 25-32). Eurographics Association. Curriculum Vitae of Jonathan C. BORG Page 10 of 21

Sep 2008 October 2008 January 2009 July 2009 August 2009 August 2009 May 2010. October 2010 June 2010 Farrugia P.J., Borg J.C., and Camilleri K.P. (2008) "A Visual Language For Paper-Based Computer-Aided Form Sketching", 14th International Conference on Distributed Multimedia Systems, Special Track on Sketch Computing, Boston, USA, Sept 2008, pp.266-269. Farrugia P.J., Borg J.C., Grima C. and Fenech O.C. (2008) "Form Design For Emotion with a Cameraphone Based Tool", 6th Design and Emotion Conference, Hong Kong, October 2008. Grech, K., Borg, C. J., Muscat, R. M., & Ellul, C. (2009). Structuring Knowledge from Surgical Observations for Design Reuse. Research into Design: Supporting Multiple Facets of Product Development (ICORD'09) Bangalore, India, 271-277. M. A. Saliba, A. Vella Zarb and J. C. Borg "Development of a Modular, Reconfigurable End Effector for the Plastics Industry: A Case Study", Proceedings of the 19th I.Mech.E. International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2009), Teesside, UK, July 2009, pp. 399-406. Galea A., Borg J.C. and Farrugia P.J. (2009) Towards intelligent design tools for micro-scale components", DS 58-5: Proceedings of ICED 09, the 17th International Conference on Engineering Design, Vol. 5, Design Methods and Tools (pt. 1), Palo Alto, CA, USA, August 2009. 24.-27.08.2009. pp. 73-84. Farrugia, P., & Borg, J. (2009). Cameraphones as New Design Tools. In Proceedings of the 17th International Conference on Engineering Design (ICED'09), Vol. 5 (pp. 49-60). Galea A., Borg J.C., Grech A. and Farrugia P.J. (2010) "Intelligent Life-Oriented Design Solution Space Selection ", Proceedings of the 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia May 2010. Farrugia P.J., Francalanza E., Attard G., Borg J.C. (2010) "Factory Planning Through Paper-based Computer-Aided Sketching " Proceedings of the Integrated Design and Manufacturing in Mechanical Engineering (IDMME) and Virtual Conference, Bordeaux, France, October 2010 Francalanza E., Constantinescu C., Borg J.C., (2010) "A Framework Supporting Manufacturing System Synthesis for Optimizing Product Families", Proceedings of the Intelligent Computation in Manufacturing Engineering Conference (ICME 2010), Capri, Italy, June 2010 2011 Galea, A., Borg, J., Grech, A., & Farrugia, P. (2011). Can Designers Be Proactively Supported As From Product Specifications?. In Proceedings of the 18th International Conference on Engineering Design (ICED11), Vol. 10 (pp. 139-148). 2011 Farrugia, P., Borg, J., & Camilleri, K. (2011). Exploiting Hand Sketching In Educating Mechanically Oriented engineering Students. In Proceedings of the 18th International Conference on Engineering Design (ICED11), Vol. 8 (pp. 45-54). 2011 Francalanza E., Borg J., Constantinescu C., (2011) "A Framework Supporting Concurrent 'Product Family and Manufacturing System' Synthesis Decision Making", in Proceedings of the 44th CIRP Conference on Manufacturing Systems (ICMS 2011), Madison, Wisconsin, USA 2011 Borg J.C. and Farrugia P.J. (2011) "Mapping Design Theory Into Industrial Applications: Best Practices From Malta ", in Proceedings of the DesignEd Asia Conference 2011, Hong Kong pp. 281-293. Curriculum Vitae of Jonathan C. BORG Page 11 of 21

2012 Galea, A., Francalanza, E., Farrugia, P. J., & Borg, J. C. (2012). Analysing Product Development Working Practices For Enhancing Innovation Through Collaboration And Simulation. In Proceedings of the 12th International Design Conference DESIGN 2012 (pp. 445-454). August 2012 L. Farrugia and J. C. Borg, (2012) "Towards Life-Oriented Evaluation Support of 'Interface Concepts", Proceedings of the 9th NordDesign Conference, Aalborg, Denmark, August 2012. 2012 Galea, A., P. J. Farrugia, E. Francalanza, J. C. Borg (2012) "A Computational Framework for Supporting Innovation in Product Development through Collaboration and Simulation ", ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012), Chicago, IL, USA. 2012 Francalanza, E., Borg, J. C., & Constantinescu, C. L. (2012). A Case for Assisting Product Family Manufacturing System Designers. Procedia CIRP, 3, 376-381. 2013 Farrugia P., Pollacco K., Borg J.C, Fenech O. "Exploiting Logarithmic Aesthetic Curves for Proactively Supporting Design for Emotions Guidance" accepted for presentation at the the International Congress of International Association of Societies of Design Research (IASDR) held between 26 th - 30 th August 2013 in Tokyo. 2013 Farrugia L, Borg J.C., A Module Interface Concept Evaluation Approach Promoting the Concilience of Design Science, Practice and Emotion accepted for presentation at the the International Congress of International Association of Societies of Design Research (IASDR) held between 26 th - 30 th August 2013 in Tokyo. 2013 Woodhouse A., Farrugia P., Grierson H, Borg JC. A Training Strategy for Managing Distributed Conceptual Design Work accepted for presentation at the 19 th International Conference on Engineering Design (ICED13) held in August 2013, Seoul, Korea 2013 E. Francalanza, J.C. Borg, C. Constantinescu (2013) An Approach Framework Supporting Manufacturing System Design for a Range of Products, 5 th International Conference on Changeable, Agile, Reconfigurable and Virtual Production - CARV 2013, Munich, Germany; 2014 Farrugia L. and Borg J.C., "Life-Cycle Interactions for Modelling Human Emotions", in Proceedings of the 9 th International Conference of Design and Emotion, October 2014, Bogota, Colombia. 2014 Farrugia L. and Borg J.C., "Towards Handling Worker Emotions for Improved Product Development", in Proceedings of the Integrated Design Engineering Workshop, September 2014, Magdeburg, Germany. 2014 Borg J.C. and Farrugia P.J. (2014) "An Engustrial Design Experiential Education Approach", in Proceedings of the DesignEd Asia Conference 2014, Hong Kong Polytechnic University. 2014 E. Francalanza, J.C. Borg, C. Constantinescu (2014), "Deriving a Systematic Approach to Changeable Manufacturing System Design", Variety Management in Manufacturing, Procedia CIRP, 2014, Vol.17:166 171. 2015 Farrugia, L., & Borg, J. C. Why Product Design Support for Improved Worker Contendedness. To be presented at the 20 th International Conference on Engineering Design - ICED 15. Milan, Italy. 2015 Mamo J., Farrugia P., Borg J.C., Wodehouse A., Grierson H. and Kovacevic A. Using Engineering Design Tools In Multidisciplinary Distributed Student Teams, International Conference On Engineering And Product Design Education. 3 & 4 September 2015, Loughborough University, Design School, Loughborough, UK Curriculum Vitae of Jonathan C. BORG Page 12 of 21

September 1992 July 1994 Other Publications Borg J. An article on "CADCAM And Quality" published in the newsletter of the Malta Quality Group. Borg J., "Computers in Manufacturing", The Sunday Times, Computers Supplement, 17th July, 1994. April 1996 April 1998 Borg J. & Pace C., Shaping Our Manufacturing Industry, The Sunday Times, Local Industries Supplement, 7th April 1996. Borg J.C. & Camilleri K.P., Vision-based Flexible Automation, The Sunday Times, Industry Supplement, 5 th April 1998. 2003 Borg J.C. Contributions To Enhance Manufacturing Industry's Competitiveness, Annual Report, University of Malta. Dec 2003 Dec 2003 Borg J.C EU Opportunities for Maltese Industry, The Times Business: 11 th December 2003. Borg J.C. Enhancing Industrial Competitiveness Through EU R&D Opportunities. The Malta Business Weekly: 4-10 th December 2003 Dec 2004 Better by Design, The Times Business Supplement, 2 nd December 2004 Editorial / Reviewing Activities Aug 99 Sep. 00 Appointed a member of the International Scientific Advisory Committee for the 1 st conference Tribology in Environmental Design organized by the Institute of Mechanical Engineers (UK) and held in September 2000 in Bournemouth UK. July 2002 Editor of IFP s WG 5.2 Knowledge Intensive CAD workshop (Malta, July 23-25 2002) pre-prints. June 2003 Requested by the Editor (Prof Susan Figner) of the Journal Research in Engineering Design (Elsevier Science) to act as one of the reviewers of a paper related to Product Life Cycle Design Methodologies. Sep 2003 Main editor of the book Knowledge Intensive Design Technology published by Kluwer Academic Publishers, USA, ISBN 1-4020-7732-7. Mar 02 Sep 03 Appointed a member of the International Scientific Advisory Committee for the 2 nd conference Tribology in Environmental Design being organized by the Institute of Mechanical Engineers (UK) in September 2003 in Bournemouth UK. Apr Sep 2006 Appointed a member of the Reviewing Committee for the Virtual Concept 2006 (Product Life Cycle and Engineering Design Management) Conference held in Cancun, Mexico 2006 NordDesign 2006 conference held at the University of Iceland, Reykjavik 16-18 August 2006; Jan Mar 2007 Reviewer for 1 paper of the Special Issue of the International Journal of e- Collaboration. (ISSN: 1548-3673) concerning 'Innovation, Creativity and e- Collaboration'. Sep 2006 Jun 2007 Appointed a member of the Reviewing Committee for the International Conference on Engineering Design 2007 held in Paris, August 2007. April Dec 2007 Appointed a member of the Reviewing Committee for The International Conference in Advanced Engineering Design And Manufacture (ICADAM) 2008 being held in Hainan, China 2012-2013 4 th International Conference on Research into Design, India 2012-2013 The 2013 International Conference on Engineering Design (ICED13). 2014 Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing (2014, Toulouse, France) 2014 8 th International Conference on Digital Enterprise Technology (Stuttgart, Germany) 2014 DesignED Asia Conference held in December 2014 at Hong Kong Polytechnic University 2014 International Conference on Research into Design (ICORD'15 India) 2015 International Conference on Engineering Design (ICED 2015, Milano, Italy) Curriculum Vitae of Jonathan C. BORG Page 13 of 21