3M Proptic High-Capacity Optical Distribution Frames The Wheel Concept for Optimized Patching A genuine revolution in the organization and operation of optical fiber distribution frames (ODFs) with: No more coiling of patch cords No more crowded jumper routes Single length jumpering fiber patch cord An accurate overview of the patching area which simplifies circuit identification, location and assignment Proptic Classic Range Distribution Frames in Three Standard Sizes A comprehensive range of three ODFs are sized from 72 to 1000 optical fiber connection points. The Classic range of distribution frames are mostly used as main distribution frames containing: Links to electronic equipment Cross-connection and interconnection application Network node Network cables flexible point Cross-connection application Network security point Diversion to backup circuits User-friendly Design and Maximum Safety All the functions are accessible from the front panel. The functions are handled separately to avoid any possible mistakes. Thanks to the wheel concept, withdrawing and inserting a jumper is very easy, whatever its position. All user actions, even emergency actions, are made simple and safe. The Distribution Frame Environment Outstanding density for example, 1000 optical points take up a footprint of less than 0.5 m 2 ( 5.38 ft. 2 ). Advanced pre-cabling allows fast, on-site installations. Proptic System Classic Racks The Proptic system Classic racks launch a new generation of optical distribution frames whose most important characteristic is simplicity. Its low depth of 30 cm (11.81 in.) makes it compatible with the size of most electronic equipment. 92
The Proptic ODF is divided into 4 distinct cells where each has a function. The Splicing Area The Pre-Cabled Area Cable Mooring Cables are moored in the 2 side panels of the Proptic cabinet. Cables can enter from the top or the bottom of the ODF. Each of the side panels can be equipped with: 6 large cable moorings for an overall cable diameter of 8 to 25 mm (0.31 to 0.98 in.) 24 small cable moorings with a 3 to 8 mm diameter (0.31 to 0.98 in.) Moorings are to be ordered separately. Please consult us if you require different combinations. 93 The pigtails from the rear side of the patching wheel are placed on stand-by in the organizer, per module of 12 or 6. The trays are laid out according to the standard color coding of the cables. The trays can accommodate 6 or 12 melting type individual splices. Please consult us if you require other splicings. Transition tubes can be installed to protect fibers from the mooring up to the trays. Tubes are supplied as 1 tube for 6 pigtails. 94 The connectors are pre-cabled in lots of 6 into mini-cable head blocks. The patching wheel can be swiveled to allow easy access to the rear side where the starting points of the pigtails are grouped before they lead to the splicing area. The wheel principle is also used in this area in order to simplify cabling and to avoid coiling. Locks The organizer and the pre-cabled area (at the back of the patch panel) are secured by the same locks. The doors of the rack are also protected by 2 locks (with different numbers). Protection The organizer is protected by a front panel. 95 Rack Dimensions and Capacities Type Dimensions No. of connection Splicing Capacity H x W x L mm (in.) points (1) (2) Classic 200 2170 x 600 x 300 (85.43 x 23.62 x 11.81) 204 216 Classic 500 2170 x 900 x 300 (85.43 x 35.43 x 11.81) 492 648 Classic 1000 2170 x 1200 x 300 (85.43 x 47.24 x 11.81) 1008 1104 (1) Standard SC, EC, E2000, etc. type connectors (2) 6 or 12 individual splices per tray
The Patching Wheel 6-Fiber Pre-Cabled Head Blocks for Cross-Connection Applications 6-Pigtail Interfaces for Interconnection Applications The cable head blocks are arranged in 2 or 3 rings around the patching wheel. This arrangement allows coiling areas to be avoided. The use of jumpering fibers, is is possible with this arrangement which are always the same length. Contact surface between fibers is reduced. It is possible to reassign a jumpering fiber at any moment. The fibers cross at the center of the wheel without being blocked behind a crowded jumper route. 96 Pigtails are grouped into pre-cabled head blocks of 6 connectors. Each head block is made up of: A set of panel interfaces 6 connector sockets with protection cap 6 pigtails in 6 different colors (red, blue, green, yellow, violet and white) The following information is given on the interfaces: The position of the head block on the distribution frame The connector row The position of the connectors on the interface 97 Pigtail interfaces are special head blocks that do not contain a socket in order to save a connection point on a link. The pigtails come directly from the interface and are connected to standard cable head block sockets as described above. In the same way as cable head blocks, pigtail interfaces are pre-cabled in lots of 6 fibers. If pigtails are not used, sockets on the interfaces allow plugs to be placed on standby. These pigtail interfaces are used for interconnection operations. Before being interconnected, the pigtails are in standby position in the center of the cable head. 98 INT and BRA Proptic ODFs are coded according to their patching. BRA: Classic cross-connection application. The patching wheel is equipped with standard cable head blocks. INT: Pigtail patching. The panel is equipped with 50% cable head blocks and 50% pigtail interfaces for both cross-connection and interconnection applications. Please consult 3M if you require other combinations. How to Order Each of the following three pages is dedicated to a Classic 200, 500 or 1000 ODF model. These pages take the form of questionnaires and allow you to choose the form of your ODF. The last page is dedicated to cable moorings and additional head blocks and pigtail interfaces.
Choose the form of your Classic 200 rack using the guide below: Dimensions: Height 2200 mm (86.61 in.) Width 600 mm (23.62 in.) Depth 300 mm (11.81 in.) Classic ODF B 200 0000 Number of Pre-Cabled Points Type of Patching From 72 to 204 points 0072 to 0204 BRA Standard cross-connection INT Pigtail patching (for interconnection, see technical description) Tuned connector single-mode The pigtails installed on the patching wheel and on standby in modules of 12 in the splicing cassettes. Other Supplies Dummy plugs for the patching wheel not in use. Alphanumeric identification ring kit for the rack assembly. Protection tube kit with an internal diameter of 2.5 mm (0.098 in.) from the moorings to the cassettes (1 tube for 6 pigtails supplied). The racks are not supplied with the jumpering fibers and moorings, which are ordered separately. Accessories Classic 6 Jumpering Fibers Kit: J 200 0000 Tuned connector, single-mode Kit made up of 6 special Classic 200 jumpering fibers. Sheaths in 6 different colors (red, blue, green, yellow, violet and white). Delivered with measuring data sheet. Contact 3M if you require any other mixed connectors or combinations.
Choose the form of your Classic 200 wall mount box using the guide below: Classic ODF C 200 0000 Number of Pre-Cabled Points Type of Patching From 72 to 204 points 0072 to 0204 BRA Standard cross-connection INT Pigtail patching (for interconnection, see technical description) Tuned connector single-mode The pigtails installed on the patching wheel and on standby in modules of 12 in the splicing cassettes. Other Supplies Dummy plugs for the patching wheel not in use. Alphanumeric identification ring kit for the rack assembly. Protection tube kit with an internal diameter of 2.5 mm (0.098 in.) from the moorings to the cassettes (1 tube for 6 pigtails supplied). The racks are not supplied with the jumpering fibers and moorings, which are ordered separately. Accessories Classic 6 Jumpering Fibers Kit: J 200 0000 Tuned connector, single-mode Kit made up of 6 special Classic 200 jumpering fibers. Sheaths in 6 different colors (red, blue, green, yellow, violet and white). Delivered with measuring data sheet. Contact 3M if you require any other mixed connectors or combinations.
Choose the form of your Classic 500 rack using the guide below: Dimensions: Height 2200 mm (86.61 in.) Width 900 mm (35.43 in.) Depth 300 mm (11.81 in.) Classic ODF B 500 0000 Number of Pre-Cabled Points Type of Patching From 144 to 492 points 0144 to 0492 BRA Standard cross-connection INT Pigtail patching (for interconnection, see technical description) Tuned connector, single-mode The pigtails installed on the patching wheel and on standby in modules of 12 in the splicing cassettes. Other Supplies Dummy plugs for the patching wheel not in use. Alphanumeric identification ring kit for the rack assembly. Protection tube kit with an internal diameter of 2.5 mm (0.098 in.) from the moorings to the cassettes (1 tube for 6 pigtails supplied). The racks are not supplied with the jumpering fibers and moorings, which are ordered separately. Accessories Classic 6 Jumpering Fibers Kit: J 500 0000 Tuned connector, single-mode Kit made up of 6 special Classic 500 jumpering fibers. Sheaths in 6 different colors (red, blue, green, yellow, violet and white). Delivered with measuring data sheet. Contact 3M if you require any other mixed connectors or combinations.
Choose the form of your Classic 1000 rack using the guide below: Dimensions: Height 2200 mm (86.61 in.) Width 1200 mm (47.24 in.) Depth 300 mm (11.81 in.) Classic ODF B 1000 0000 Number of Pre-Cabled Points Type of patching From 288 to 1008 points 0288 to 1008 BRA Standard cross-connection INT Pigtail patching (for interconnection, see technical description) Tuned connector, single-mode The pigtails installed on the patching wheel and on standby in modules of 12 in the splicing cassettes. Other Supplies Dummy plugs for the patching wheel not in use. Alphanumeric identification ring kit for the rack assembly. Protection tube kit with an internal diameter of 2.5 mm (0.098 in.) from the moorings to the cassettes (1 tube for 6 pigtails supplied). The racks are not supplied with the jumpering fibers and moorings, which are ordered separately. Accessories Classic 6 Jumpering Fibers Kit: J 1000 0000 Tuned connector single-mode Kit made up of 6 special Classic 1000 jumpering fibers. Sheaths in 6 different colors (red, blue, green, yellow, violet and white). Delivered with measuring data sheet. Contact 3M if you require any other mixed connectors or combinations.
Additional Cable Head Blocks Precabled Classic Head Block T6FO 0000 Tuned connector single-mode Description The assembly is made up of 2 22.5 x 45 in. connector interfaces, 6 connectors and 6 pigtails with dummy plugs and color fibers (red, blue, green, yellow, violet and white). Delivered with measuring data sheet. Classic Pigtail Interfaces P6FO 0000 Tuned connector single-mode Interface for linking a single connection point to the patch panel. The 3 pigtails come directly from the interface without passing through the connectors. Description During normal operation, each pigtail is either on standby on the interface in the socket designed for this purpose or connected to a connector of a standard pre-cabled head block (interconnection). The assembly is made up of 2 22.5 x 45 in. interfaces for patching by pigtails, 6 special pigtails with dummy plugs and color fibers (red, blue, green, yellow, violet and white). Delivered with measuring data sheet.
3M Proptic High-Capacity Optical Distribution Frames Product Description UPC Number Classic 200 Wall Mount PBOX-C200-0054-SM02-BRA Proptic box SM SC/PC N241050A0000-NA 05111512627 PBOX-C200-0102-SM02-BRA Proptic box SM SC/PC N241051A0000-NA 05111512628 PBOX-C200-0156-SM02-BRA Proptic box SM SC/PC N241052A0000-NA 05111512629 PBOX-C200-0204-SM02-BRA Proptic box SM SC/PC N241053A0000-NA 05111512630 PBOX-C200-0054-SM04-BRA Proptic box SM SC/APC N241054A0000-NA 05111512631 PBOX-C200-0102-SM04-BRA Proptic box SM SC/APC N241055A0000-NA 05111512632 PBOX-C200-0156-SM04-BRA Proptic box SM SC/APC N241056A0000-NA 05111512633 PBOX-C200-0204-SM04-BRA Proptic box SM SC/APC N241057A0000-NA 05111512634 PBOX-C200-0054-SM05-BRA Proptic box SM FC/PC N241058A0000-NA 05111512635 PBOX-C200-0102-SM05-BRA Proptic box SM FC/PC N241059A0000-NA 05111512636 PBOX-C200-0156-SM05-BRA Proptic box SM FC/PC N241060A0000-NA 05111512637 PBOX-C200-0204-SM05-BRA Proptic box SM FC/PC N241061A0000-NA 05111512638 C200 Jumper Kits (6 per kit) PKIT-J200-SM02 Proptic kit SM SC/PC for 200 ROE992490000-NA 05111512639 PKIT-J200-SM04 Proptic kit SM SC/APC for 200 ROE992570000-NA 05111512640 PKIT-J200-SM05 Proptic kit SM FC/PC for 200 ROE992580000-NA 05111512641 Proptic B200 PCAB-B200-0054-SM02-BRA Proptic cabinet SM SC/PC N241066A0000-NA 05111512643 PCAB-B200-0102-SM02-BRA Proptic cabinet SM SC/PC N241067A0000-NA 05111512644 PCAB-B200-0156-SM02-BRA Proptic cabinet SM SC/PC N241068A0000-NA 05111512645 PCAB-B200-0204-SM02-BRA Proptic cabinet SM SC/PC N241069A0000-NA 05111512646 PCAB-B200-0054-SM04-BRA Proptic cabinet SM SC/APC N241070A0000-NA 05111512647 PCAB-B200-0102-SM04-BRA Proptic cabinet SM SC/APC N241071A0000-NA 05111512648 PCAB-B200-0156-SM04-BRA Proptic cabinet SM SC/APC N241072A0000-NA 05111512649 PCAB-B200-0204-SM04-BRA Proptic cabinet SM SC/APC N241073A0000-NA 05111512650 PCAB-B200-0054-SM05-BRA Proptic cabinet SM FC/PC N241074A0000-NA 05111512651 PCAB-B200-0102-SM05-BRA Proptic cabinet SM FC/PC N241075A0000-NA 05111512652 PCAB-B200-0156-SM05-BRA Proptic cabinet SM FC/PC N241076A0000-NA 05111512653 PCAB-B200-0204-SM05-BRA Proptic cabinet SM FC/PC N241077A0000-NA 05111512654
3M Proptic High-Capacity Optical Distribution Frames Product Description UPC Number Proptic B500 PCAB-B500-0126-SM02-BRA Proptic cabinet SM SC/PC N241098A0000-NA 05111512655 PCAB-B500-0246-SM02-BRA Proptic cabinet SM SC/PC N241099A0000-NA 05111512656 PCAB-B500-0372-SM02-BRA Proptic cabinet SM SC/PC N241100A0000-NA 05111512657 PCAB-B500-0492-SM02-BRA Proptic cabinet SM SC/PC N241101A0000-NA 05111512658 PCAB-B500-0126-SM04-BRA Proptic cabinet SM SC/APC N241102A0000-NA 05111512659 PCAB-B500-0246-SM04-BRA Proptic cabinet SM SC/APC N241103A0000-NA 05111512660 PCAB-B500-0372-SM04-BRA Proptic cabinet SM SC/APC N241104A0000-NA 05111512661 PCAB-B500-0492-SM04-BRA Proptic cabinet SM SC/APC ROE000750000-NA 05111512662 PCAB-B500-0126-SM05-BRA Proptic cabinet SM FC/PC N241105A0000-NA 05111512663 PCAB-B500-0246-SM05-BRA Proptic cabinet SM FC/PC N241106A0000-NA 05111512664 PCAB-B500-0372-SM05-BRA Proptic cabinet SM FC/PC N241107A0000-NA 05111512665 PCAB-B500-0492-SM05-BRA Proptic cabinet SM FC/PC N241108A0000-NA 05111512666 B500 Jumper Kits (6 per kit) PKIT-J500-SM02 Proptic kit SM SC/PC for 500 ROE992080000-NA 05111512667 PKIT-J500-SM04 Proptic kit SM SC/APC for 500 ROE992160000-NA 05111512668 PKIT-J500-SM05 Proptic kit SM FC/PC for 500 ROE992170000-NA 05111512669 Proptic B1000 PCAB-B1000-0252-SM02-BRA Proptic cabinet SM SC/PC N241113A0000-NA 05111512670 PCAB-B1000-0504-SM02-BRA Proptic cabinet SM SC/PC N241114A0000-NA 05111512671 PCAB-B1000-0756-SM02-BRA Proptic cabinet SM SC/PC N241115A0000-NA 05111512672 PCAB-B1000-1008-SM02-BRA Proptic cabinet SM SC/PC N241116A0000-NA 05111512673 PCAB-B1000-0252-SM04-BRA Proptic cabinet SM SC/APC N241117A0000-NA 05111512674 PCAB-B1000-0504-SM04-BRA Proptic cabinet SM SC/APC N241118A0000-NA 05111512675 PCAB-B1000-0756-SM04-BRA Proptic cabinet SM SC/APC N241119A0000-NA 05111512676 PCAB-B1000-1008-SM04-BRA Proptic cabinet SM SC/APC ROE000970000-NA 05111512677 PCAB-B1000-0252-SM05-BRA Proptic cabinet SM FC/PC N241120A0000-NA 05111512678 PCAB-B1000-0504-SM05-BRA Proptic cabinet SM FC/PC N241121A0000-NA 05111512679 PCAB-B1000-0756-SM05-BRA Proptic cabinet SM FC/PC N241122A0000-NA 05111512680 PCAB-B1000-1008-SM05-BRA Proptic cabinet SM FC/PC N241123A0000-NA 05111512681 B1000 Jumper Kits (6 per kit) PKIT-J1000-SM02 Proptic kit SM SC/PC for 1000 ROE990490000-NA 05111512682 PKIT-J1000-SM04 Proptic kit SM SC/APC for 1000 ROE990560000-NA 05111512683 PKIT-J1000-SM05 Proptic kit SM FC/PC for 1000 ROE991860000-NA 05111512684 Accessories N711010A0000-NA Proptic kit 2 mooring plates 12-25 mm (0.47 to 0.98 in.) overall dia cable 05111512685 NN4710240000-NA Proptic kit 2 mooring plates 8-13 mm (0.31 to 0.51 in.) overall dia cable 05111512686 NN471026VB00-NA Proptic kit 10 mooring plates 3-8 mm (0.12 to 0.31 in.) overall dia cable 05111512687 N581056B0000-NA Proptic add kit 6 tubes w/ internal diameter of 2.5 mm (0.098 in) casing 05111512688