Additional Terms and Conditions E-2D Advanced Hawkeye Low Rate Initial Production (LRIP) 3 and 4 (Contract No. N C-0044)

Similar documents
Additional Terms and Conditions E-2D Advanced Hawkeye Low Rate Initial Production (LRIP) Lots 3 and 4 (Prime Contract No.

Additional Terms and Conditions E-2D Full Rate Production (FRP) (Prime Contract No. N C-0063)

Addendum 529, Rev. 1 (3/14) Page 1 of 5

Addendum 517 (12/11) Page 1 of 6

TERMS & CONDITIONS STANDARD PAGE 1 OF 5 DATE: 6 AUGUST 2014

LOCKHEED MARTIN CORPORATION PRIME SUPPLEMENTAL FLOWDOWN DOCUMENT (PSFD) ADDITIONAL TERMS AND CONDITIONS FOR SUBCONTRACTS/PURCHASE ORDERS UNDER

AN-C57 MODIFICATIONS TO GENERAL TERMS AND CONDITIONS GOVERNMENT PRIME CONTRACT F D-0006

DELVA TOOL AND MACHINE TERMS AND CONDITIONS OF PURCHASE

MARINE GROUP BOAT WORKS SUBCONTRACT/PURCHASE ORDER TERMS AND CONDITIONS

EXHIBIT B. GOVERNMENT SPECIAL PROVISIONS APPLICABLE TO PRIME CONTRACT F C-0031 [include as applicable to your subcontract]

Additional Terms and Conditions EA-18G Airborne Electronic Attack (AEA) Kits for the Royal Australian Air Force (RAAF) (Boeing PO Number )

NORTHROP GRUMMAN CORPORATION

1.0 Terms and Conditions of Sale

THIS APPENDIX APPLIES TO REQUESTS FOR QUOTATION, PURCHASE ORDERS OR PURCHASE AGREEMENTS ISSUED UNDER GOVERNMENT CONTRACTS.

SENIOR AEROSPACE ABSOLUTE MANUFACTURING TERMS AND CONDITIONS OF PURCHASE

PROGRAM ADDENDUM 213C (04-03)

SIG SAUER, INC. STANDARD TERMS AND CONDITION FOR PURCHASE ORDERS

GOVERNMENT PROVISIONS APPLICABLE TO PRIME CONTRACT DAAH23-02-C-0155

CARRDAN TERMS AND CONDITIONS

CUSTOMER CONTRACT REQUIREMENTS DLA Spares CUSTOMER CONTRACT SPRPA1-14-D-002U

CUSTOMER CONTRACT REQUIREMENTS Transactional Spares CUSTOMER CONTRACT SPM4A1-09-G-0004 DO 8009

Common Terms and Conditions Guide Section 5 Government Contract Requirements Clause Number: 5052 Effective: 10/15/2002 Page: 1 of 9

Terms & Conditions. Cleveland, OH Toledo, OH Pharr, TX. Universal Metal Products, Inc Lakeland Boulevard Cleveland, OH

Protecting the Government's Interests When Subcontracting With Contractors Debarred, Suspended or Proposed

Maury Microwave Quality Clauses / Standard Terms & Conditions of Purchase ----

CUSTOMER CONTRACT REQUIREMENTS DLA CUSTOMER CONTRACT SPE4A1-15-G-0001

GENERAL TERMS AND CONDITIONS OF SALE. December 2010

HITCO CARBON COMPOSITES, INC. Attachment B Fixed Price Terms and Conditions for Government Contracting

ROBOTIC RESEARCH STANDARD TERMS AND CONDITIONS OF PURCHASE PURCHASE ORDERS TABLE OF CONTENTS

FORMATION OF CONTRACT AND KEY TERMS

CUSTOMER CONTRACT REQUIREMENTS Subcontractor CUSTOMER CONTRACT P

GULFSTREAM IV AND FOKKER 100 AIRCRAFT PROGRAM ADDENDUM

Order & Quotation Terms & Conditions DEFINITIONS: Buyer Order Product Quotation RFQ Seller Terms and Conditions 1. Applicability:

EXHIBIT A GOVERNMENT PROVISIONS APPLICABLE TO PRIME CONTRACT DAAJ09-95-C-A001

CUSTOMER CONTRACT REQUIREMENTS

A. Buyer: The legal entity issuing this Order.

CUSTOMER CONTRACT REQUIREMENTS DARPA ACT CUSTOMER CONTRACT HR C-0001

Systems & Electronics, Inc. Purchase Order Terms & Conditions

APPLICABLE TERMS AND CONDITIONS

sold under a separate Order. Failure of Seller to deliver any installment shall not entitle Buyer to cancel the balance of the Order. 4.3 Any time quo

Confirmation of Purchase Order/Terms and Conditions of Sale 1. ACCEPTANCE OF ORDER: Natel Engineering Co., Inc. or it s Powercube division ( Natel or

GENERAL TERMS AND CONDITIONS FOR THE SALE OF GOODS

CONDITIONS OF PURCHASE (GOODS AND SERVICES) DOMESTIC AND INTERNATIONAL

CONDITIONS OF PURCHASE (GOODS AND SERVICES) DOMESTIC AND INTERNATIONAL

CUSTOMER CONTRACT REQUIREMENTS DLA Spares CUSTOMER CONTRACT SPRPA1-14-D-002U

CUSTOMER CONTRACT REQUIREMENTS AV-8 CUSTOMER CONTRACT N D-1000

ALLIED INTERNATIONAL SUPPORT, INC. TERMS AND CONDITIONS OF PURCHASE ORDER

ACKNOWLEDGEMENT YOUR ORDER IS ACCEPTED SUBJECT TO THE MOLEX TERMS AND CONDITIONS APPEARING HEREON

CUSTOMER CONTRACT REQUIREMENTS Combat Track II Sustainment and Support CUSTOMER CONTRACT FA D-0002

GENERAL TERMS AND CONDITIONS OF PURCHASE (02/2018)

Albany Safran Composites, LLC Albany Engineered Composites SAS Terms and Conditions of Purchase

TERMS AND CONDITIONS OF SALE

KORRY ELECTRONICS CO TERMS AND CONDITIONS OF SALE

ROTOR CLIP PURCHASE ORDER GENERAL TERMS AND CONDITIONS

Terms & Conditions of Sale:

Purchase Order Terms and Conditions Form Number: FM Rev

CUSTOMER CONTRACT REQUIREMENTS Survivabilty Enhancement CUSTOMER CONTRACT W15P7T-13-C-C003

EATON FILTRATION BUSINESS

TERMS AND CONDITIONS Fixed Price Under Commercial Contract

Aegis Power Systems, Inc.

PURCHASE ORDER TERMS AND CONDITIONS

PHYSICAL OPTICS CORPORATION FIRM FIXED PRICE TERMS AND CONDITIONS

PAGE 755. The following new Section is added after Section 715. SECTION 725 VALUE ADDED HIGHWAY LIGHTING SYSTEM

Herndon Products 3801 Lloyd King Dr. O Fallon, MO Phone Fax

ELECTRONIC COMMERCE TRADING PARTNER AGREEMENT (Dated 10 November 2016)

Molex Standard Terms and Conditions for the Asia Pacific Region

SUPPLIER REQUIREMENTS FOR BUYER/GOVERNMENT/CUSTOMER PROPERTY MANAGEMENT (VARIABLE)

GENERAL TERMS AND CONDITIONS OF SALE

KOHLER INDUSTRIES, INC. Term and Conditions of Sale, Including Limited Warranty

Molex Standard Terms and Conditions for the Asia Pacific Region

Purchase Order General Terms and Conditions Revised 1/1/2018

COHERENT TERMS AND CONDITIONS OF SALE TAIWAN

TC-05 Terms and Conditions of Purchase (Purchase Order International Terms and Conditions Fixed Price Procurement)

OWNERS, BUSINESSES AND TENANTS PARTICIPATION AND RE-ENTRY RULES

General Supplier Terms (GST 01/15)

NATIONAL STEEL AND SHIPBUILDING COMPANY SPECIAL TERMS AND CONDITIONS T-AO(X) PROGRAM N R-2200

AUTOMATED PACKAGING SYSTEMS, INC. VENDOR TERMS AND CONDITIONS

FLIGHTSAFETY INTERNATIONAL SIMULATION SYSTEMS

CUSTOMER CONTRACT REQUIREMENTS DLA CUSTOMER CONTRACT SPE4A1-14-G-0007

TERMS AND CONDITIONS OF PURCHASE (T&C s)

Colorado s Facilitative Technology Lemon Law House Bill

Battelle Advanced Manufacturing Standard Terms and Conditions For COTS Items

Standard Terms and Conditions of Sale Non-Systems The Americas

I. DEFINITIONS as used throughout the Purchase Order, and this Contract document, the following terms shall have the meaning set forth below:

SABIC INNOVATIVE PLASTICS ARGENTINA CONDITIONS OF SALE

Purchasing Terms & Conditions

TABLE OF CONTENTS. C. Seller: The legal entity that contracts with Buyer under this Order.

General Provisions for Commercial Firm Fixed Price Contracts. SECTION I (Reference POSP ) TABLE OF CONTENTS

CUSTOMER CONTRACT REQUIREMENTS Proprietary CUSTOMER CONTRACT Loki

SIKORSKY AIRCRAFT CORPORATION SELLER QUALITY REQUIREMENTS

GENERAL TERMS AND CONDITIONS Applicable to Frontier Electronic Systems Corporation Purchase Orders and Subcontracts

CUSTOMER CONTRACT REQUIREMENTS EATTS3 CUSTOMER CONTRACT W911W6-12-D-0006

California's Security Deposit Statute

Conditions of Purchase FISCHER GmbH & Co. KG Lagertechnik + Regalsysteme, Stutensee

ON LEASING THE LAW ON LEASING CHAPTER I GENERAL PROVISIONS. Article 1. Scope of application

AIRBOSS RUBBER SOLUTIONS - TERMS AND CONDITIONS OF SALE

MODULAR MINING SYSTEMS TERMS AND CONDITIONS OF SALE

WFS Purchase Order Terms and Conditions

A. IF SPECIAL TOOLING AND/OR SPECIAL TEST EQUIPMENT IS REQUIRED FOR WHICH THE PURCHASER WILL NOT BE CHARGED, SELLER S QUOTE TO INCLUDE:

judgment in price, any duties. good quality will conform including furnished by and AMOT arising from the goods Buyer. result of the for Texas shall

Transcription:

Additional Terms and Conditions E-2D Advanced Hawkeye Low Rate Initial Production (LRIP) 3 and 4 (Contract No. N00019-10-C-0044) All of the additional terms and conditions set forth below are incorporated in and made part of this Purchase Order. Any conflict between any of the conditions contained in this form and those appearing on Northrop Grumman Purchase Order Terms and Conditions shall be resolved in favor of the conditions in this form. I. Changes to Terms and Conditions A. The following changes are made to the clause entitled, FAR and DFARS Provisions/Clauses : 1. Delete the following DoD FAR Supplement Clauses: 252.225-7014 PREFERENCE FOR DOMESTIC SPECIALTY METALS AND ALTERNATE I 2. Add the following FAR clauses: 52.223-12 REFRIGERATION EQUIPMENT AND AIR CONDITIONERS 52.243-7 NOTIFICATION OF CHANGES (under paragraph b, the notification period is 60 days, under paragraph d, the response time is 120 days). 3. Add the following DoD FAR Supplement clauses: 252.211-7003 ITEM IDENTIFICATION AND VALUATION (items requiring unique item identification shall be identified on the resultant order). 252.225-7004 REPORT OF INTENDED PERFORMANCE OUTSIDE THE UNITED STATES AND CANADA SUBMISSION AFTER AWARD 252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST 252.225-7009 RESTRICTION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING SPECIALTY METALS Addendum 507 (Rev. 2, 5/10) Page 1 of 6

II. ADDITIONAL CONDITIONS 1. NOTICE REGARDING THE DISSEMINATION OF EXPORT- CONTROLLED TECHNICAL DATA (NAVAIR 5252.227-9507) (a) Export of information contained herein, which includes release to foreign nationals within the United States, without first obtaining approval or license from the Department of State for items controlled by the International Traffic in Arms Regulations (ITARS), or the Department of Commerce for items controlled by the Export Administration Regulations (EAR), may constitute a violation of law. (b) For violation of export laws, the contractor, its employees, officials or agents are subject to: (1) Imprisonment and/or imposition of criminal fines; and (2) Suspension or debarment from future Government contracting actions. (c) The Government or Northrop Grumman Systems Corporation shall not be liable for any unauthorized use or release of export-controlled information, technical data or specifications in this Order. 2. Delete the clause entitled, Warranty and substitute the following: WARRANTY (NAVAIR 5252.246-9535) (a) Definitions: (1) Defects: As used herein means any condition or characteristic in any supplies furnished by Seller under this Order that is not in compliance with the requirements of this Order. (2) Correct: As used herein means to eliminate the defects. Corrective action may include repair, replacement, redesign and development and qualification of a modification to eliminate the defect and retrofit of such modification. (3) Organic Repair: As used herein means organizational, intermediate, or depot level repair actions performed by any Navy or other Department of Defense activity. (4) Essential Performance Requirements: As used herein means any operational capability, or other characteristic identified as an essential performance requirement necessary for the supplies to fulfill the military requirements for which they were designed. Essential performance requirements are set forth in the Schedule. Addendum 507 (Rev. 2, 5/10) Page 2 of 6

(b) Warranty: (1) Notwithstanding inspection and acceptance by Buyer or any provision of this Order concerning the conclusiveness thereof, the Seller warrants that all supplies furnished under this Order: (i) shall conform to the design and manufacturing requirements in the Order and amendments thereto; (ii) shall be free from all defects in material and workmanship, at the time of acceptance; and, (iii) shall conform to the essential performance requirements set forth in the Schedule. (2) With respect to Buyer or Government-furnished property, Seller's warranty shall extend only to its proper installation, unless Seller performs some modification or other work on such property in which case Seller's warranty shall extend to such modification or other work. (3) This warranty will not be voided by organic repair. (c) Remedies: (1) Corrective Actions: In the event of a breach of the Warranty in paragraph (b) above, Buyer, at its election, may require Seller to take all actions necessary to correct the breach at no additional cost to Buyer including: (i) Perform analyses of causes of defects or failures resulting in a breach of warranty provisions under this Order, propose corrective actions for such causes including schedules for performing such corrective actions, and, if so directed by Buyer, perform the corrective actions proposed as a result of such analyses; (ii) Correct, at the original point of delivery or at Seller's plant, defective or nonconforming supplies; (iii) Furnish, at the original point of delivery or at Seller's plant, such materials or parts and installation instructions as may be required to complete successfully the corrective action; and (iv) Prepare and furnish new or revised data and reports directly associated with the corrective action. (2) Equitable Adjustment: (i) If Buyer elects not to require Seller to take corrective action for any breach of warranty under this clause, Buyer shall be entitled to an equitable reduction in the price of such supplies. (ii) If Buyer performs or has performed the corrective action, Buyer shall be entitled to the reimbursement of reasonable Addendum 507 (Rev. 2, 5/10) Page 3 of 6

costs incurred to correct the deficiency. (3) When supplies require correction or replacement pursuant to this clause, Buyer will bear the cost of the transportation to the port of CONUS entry. Seller will bear the transportation costs between the CONUS port of entry and the site where correction or replacement action occurs and subsequent return to that port of entry. (d) Notification and Correction Procedures: (1) Except as the notification period may be extended by operation of paragraph (d)(4) herein, Seller shall be notified in writing by Buyer of any breach of the warranty set forth in paragraph (b) above, including a description of the breach, within 210 days after acceptance of nonconforming or defective supplies by the Government, or within two (2) years of acceptance by Buyer, whichever is earlier. (2) Within sixty (60) days of such notification, Seller shall submit to Buyer a written plan with recommended actions and a proposed schedule to remedy the breach. (3) Seller warrants that all corrective action pursuant to the Remedies section of this clause shall be completed and supplies tendered for redelivery to Buyer within either (i) sixty (60) calendar days from the date of Seller receipt of uncorrected supplies at the Seller's plant or original point of delivery or (ii) a schedule pursuant to a plan of action approved in writing by Buyer. If the Seller is unable to provide corrective action within the applicable time frame, Seller shall request an extension, in writing, from Buyer. (4) Notification Period for Board of Inspection and Survey Trials. If Board of Inspection and Survey (BIS) Trials are conducted or will be conducted under this or any prior Order with respect to aircraft of the type or types to be delivered under this Order, the period of notification of a breach of the warranties in paragraph (b) shall be one (1) year from the date the last aircraft which includes a component manufactured by the Seller of the type being acquired completes trials, or two (2) years from the date the first such aircraft which includes Seller's component is accepted for such trials, whichever is later. For the purpose of this clause, aircraft with different Government model letter designations shall, unless otherwise provided in this Order, be considered aircraft of different types. (5) Warranty for Corrected or Replaced Supplies. Any supplies or components replaced pursuant to this warranty are subject to the provisions of this clause, including those on remedies and notification, in the same manner as supplies or components initially Addendum 507 (Rev. 2, 5/10) Page 4 of 6

delivered. For supplies or components corrected under this clause by repair, Seller shall be notified in writing of any breach of the warranty set forth in paragraph (b) above (including a description of the breach) within 210 days after receipt by the Government of the corrected supplies, or within two (2) years after receipt by Buyer, whichever is earlier. (6) Seller shall, notwithstanding any dispute regarding the existence of a breach of warranty, comply with Buyer's direction to correct the breach. If after Seller undertakes correction, it is determined that a breach of warranty did not occur, the price and other affected provisions of this Order will be equitably adjusted to compensate Seller for actions taken pursuant to this clause. (e) Marking: (1) All warranted supplies furnished under this Order shall be identified as such by marking each weapon replaceable assembly (WRA) in accordance with MIL-STD-130 and each shipping container in accordance with MIL-STD-129L. (2) For supplies accepted conditionally or under special conditions, the applicable log book or aeronautical equipment service record card shall specify any exceptions to acceptance, including work to be completed, material to be installed and defects or nonconformances to be corrected. (3) All warranty markings shall be indelible, legible and include, as a minimum, the following: (i) "WARRANTED ITEM" in bold letters at least twice as large as those used to provide additional information; (ii) NSN, manufacturer's part number, serial number or other item identifier; (iii) prime contract number and Order number; (iv) manufacturer or entity providing the warranty; (v) date or time for expiration of the warranty; (vi) a statement that organic repair will not void the warranty; and (vii) shipping location and point of contact for warranty repairs. (f) Warranty Administration: The Seller shall provide administration for all warranty claims. Addendum 507 (Rev. 2, 5/10) Page 5 of 6

(g) Miscellaneous: (1) The rights and remedies of Buyer and Seller provided in this clause are in addition to, and do not limit, any rights and remedies Buyer and Seller may have under any other clause or provision of this Order. (2) Buyer's right under this Order because of latent defects, fraud, or such gross mistakes as amount to fraud are not limited by this clause. 3. TERMS AND CONDITIONS ARE SUBJECT TO CHANGE: Seller understands and agrees that the terms and conditions of this purchase order are subject to change as a result of definitization of the prime contract. Seller agrees to negotiate same with the contractor promptly and in good faith. Addendum 507 (Rev. 2, 5/10) Page 6 of 6