MAHATMA GANDHI INSTITUTE OF TECHNOLOGY Gandipet, Hyderabad 500 075 FACULTY PROFILE 1. JNTUH REGISTRATION ID: 69150402-130719 2. NAME: Dr. V.V.N. SATYA SURESH 3. DESIGNATION: Associate Professor 4. YEARS OF EXPERIENCE: Teaching : 21 years, Industry : 2 years 5. EMAIL ID: vvnsatyasuresh_mct@mgit.ac.in, vvnss@yahoo.com 6. UG DEGREE: B.E in Mechanical Engineering 7. PG DEGREE: M.Tech (CAD/CAM), M.Sc (Value Education & Spirituality) 8. PH.D(AREA OF THE PH.D WORK): Manufacturing (Metal Forming) 9. SUBJECTS TAUGHT: UG level - Engg. Mechanics, CAD/CAM, Strength of Materials, Human values and Professional Ethics, FEM, Engg. Drawing etc. PG level Advanced CNC, Rapid prototyping, Autotronics and Vehicle intelligence 10. RECENT PAPER PUBLICATIONS IN INTERNATIONAL JOURNALS: SCI/SCIE Peer-reviewed International Journal Publications 1. V.V.N. Satya Suresh, Srinivasa Prakash Regalla, Amit Kumar Gupta (2017) Combined effect of thickness ratio and selective heating on weldline movement in stamped tailorwelded blanks Materials and Manufacturing Processes, 32(12), 1363-1367. 2. V.V.N. Satya Suresh, Srinivasa Prakash Regalla, Amit Kumar Gupta (2018) Optimum parameters to minimize weld line movement in the warm forming of tailor-welded blanks Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (4), 234. 3. V.V.N. Satya Suresh, Srinivasa Prakash Regalla, Amit Kumar Gupta (2018) Minimization of weld line movement in heat-assisted forming of tailor welded blanks Proceedings of Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science(Article first published online: November 7, 2018). Scopus Publications through Peer-reviewed International Conferences 1. Vakada Venkata Naga Satya Suresh, Srinivasa Prakash Regalla (2017) Investigations on dimensional accuracy of stamped tailor welded blanks under warm forming conditions ASME Proceedings of the International Mechanical Engineering Conference and Exposition 2017, Paper No.IMECE2017-72478, pp. V002T02A071.doi: 10. 1115@IMECE2017-72478.
2. Satya Suresh V.V.N, Srinivasa Prakash Regalla, Ratna Sudheer G (2016) Effect of localized heat treatment on the weld line shift in deep drawing of tailor welded blanks(twbs) AIP conference proceedings, 1769, 100015 (1-10). 3. Satya Suresh V.V.N, Srinivasa Prakash Regalla, Amit Kumar Gupta, Padmanabham G (2015) Weld line shift in the case of Tailor welded blanks subjected to differential strengths with respect to TIG and Laser welding, Materials Today Proceedings, 2, pp 3501-3510. 4. Satya Suresh V.V.N, Srinivasa Prakash Regalla (2018) Approximation of initial shape of the weld line in the stamping of tailor welded blanks IOP conference Series, Materials Science and Engineering (Accepted for publication) Other Peer-reviewed International Journal Publications 1. Satya Suresh V.V.N, Srinivasa Prakash Regalla, Amit Kumar Gupta (2017) Influence of geometric parameters on weld line movement in the selective heating of tailor welded blanks Advances in Materials Processing Technologies,3, 385-392 (Taylor and Francis) 2. Prasad Reddy P.V, Satya Suresh V.V.N (2013) A review on importance of universal gripper in industrial robot applications International Journal of Mechanical Engineering and Robotics research, vol.2. no.2, pp 255-264, ISSN 2278-0149 Other Publications through Peer-reviewed National/International Conferences 1 Arman Khan,V.V.N. Satya Suresh, Srinivasa Prakash Regalla (2014) Effect of thickness ratio on Weld Line Displacement in Deep Drawing of Aluminium Steel Tailor Welded Blanks Procedia Materials Science, 6, pp 401-408 (Elsevier) 2 Satya Suresh V.V.N., Srinivasa Prakash Regalla, Uday kumar R (2014) Experimental investigations, Modeling and Simulation of Tailor welded blanks: A review International Journal of Current Engineering and Technology, Special issue-2, 141-146. Other International journals 1 Pavan Kalyan L, Satya Suresh V.V.N (2015) Human-Robot Interaction with an assistive robot to help people with severe motor impairments International Journal of Scientific Engineering and technology research, ISSN 2319-8885, vol 4, Issue 18 pp 3311-3315 2 Pavan Kalyan L, Satya Suresh V.V.N (2015) Fabrication of a Human-Robot Interaction with an assistive robot to help people with severe motor impairments using PC control International Journal of Professional Engineering Studies, vol 5 Issue 1, pp 65-69
National/International Conference Proceedings Satya Suresh V.V.N., Srinivasa Prakash Regalla, Amit Kumar Gupta (2016) Influence of weld profile shape on the weld line movement of Tailor welded blanks at Sheet Metal Forming Research Association (SMFRA 16) Conference held at IIT Bombay between 7 th -9 th December, 2016. V.V.N. Satya Suresh, Srinivasa Prakash Regalla Comparison of welding processes in the forming of tailor welded blanks in the 6 th WRCC organized by International Institute of Welding during 7-9 April, 2016 at Hyderabad V.V.N. Satya Suresh, Srinivasa Prakash Regalla, Amit Kumar Gupta Minimization of weld line movement and improvement of geometric accuracy in the forming of Tailor welded blanks using finite element methods at International Symposium for Research Scholars (ISRS) at IIT Madras, December 11-13, 2014 V.V.N. Satya Suresh, Srinivasa Prakash Regalla A combined FEA and design of experiments approach for the design and analysis on the weld line movement in localized warm forming of Tailor Welded Blanks at DPLC, 2016 conference held in BITS-Pilani, Hyderabad campus, March 20, 2016. V.V.N. Satya Suresh, Srinivasa Prakash Regalla Effect of weld line position and thickness ratio on the movement of weld line in the warm forming of Tailor welded blanks at RAMR, 2016 conference held in BITS-Pilani, Hyderabad campus, April 22-23, 2016. Satya Suresh V.V.N., Srinivasa Prakash Regalla Approximation of perform shape for the Minimization of weld line shift in deep drawing of Tailor welded blanks in the Advances in Materials Joining Technologies [AMJT 2015] organized by Indian Institute of Welding, Hyderabad branch on 29 th May 2015 Satya Suresh V.V.N., Srinivasa Prakash Regalla Minimization of weld line movement by the approximation of weld in the forming of Tailor welded blanks (TWB) using finite element simulation in the workshop on Advances in Welding and Surface Engineering (AWSE) organized by IIW, Hyderabad branch in October 2014 11. PAPERS PRESENTED IN INTERNATIONAL CONFERENCES: ASME s IMechE conference held in Florida, USA between 3-9 November, 2017 AMPT 2016, Malaysia between 8-11 November,2016 19 th ESAFORM conference held at Nantes, France between 27-29 th April, 2016 SMFRA 16 conference held at IIT Bombay, Mumbai, between 8-9 Dec, 2016 WRCC organised by International Institute of Welding during 7-9 April, 2016 at Hyderabad ICMPC on 14 th March,2015 held at Griet Hyderabad ISRS at IIT Madras, December 11-13, 2014 ICMPC on 14 th March,2014 held at Griet Hyderabad ICAMS held on 11 th January, 2014 at Vardhman college of engineering at Hyderabad
12. PAPER PUBLICATIONS IN NATIONAL JOURNALS: 1 Satya Suresh, V.V.N, Srinivasa Prakash Regalla (2017) A Novel Deep Drawing Tooling With Selective Heating And Cooling For Tailor Welded Blanks (TWBs) The Patent Office Journal No.25/2017, 21694 13. PAPER PUBLICATIONS IN NATIONAL CONFERENCES: DPLC, 2006 conference held in BITS-Pilani, Hyderabad campus RAMR, 2016 conference held in BITS-Pilani, Hyderabad campus AMJT 2015 organized by IIW, Hyderabad branch on 29 th May 2015 AWSEorganized by IIW, Hyderabad branch in October 2014 14. BOOKS PUBLISHED: One. Open Heart, a Self counseling book 15. RESEARCH PROJECTS UNDERTAKEN WITH NAME OF THE SPONSORING AGENCY: 1 Research grant of Rs. 4.8 lakhs received from UGC towards Minor research project with project no. F MRP-6160/15 (SERO/UGC) 16. RESEARCH GUIDANCE: Guided six M.Tech Students 17. CONTRIBUTIONS AT THE DEPARTMENTAL LEVEL: Co-Convenor (Technovation-2014), NBA & NAAC related works, Class-in-charge, Departmental library in-charge, Departmental Placement Co-ordinator and Student projects in-charge. 18. CONTRIBUTIONS AT THE COLLEGE LEVEL: Co-Convenor of Anti-Ragging squad (2014-2018), Lift maintenance, Stage committee Co-convenor for MAGISTECH (2014-2017) and NIRVANA (2010-2017) events. 19. REFRESHER COURSES/ WORKSHOPS/CONFERENCES ATTENDED: a. 2-Day workshop on Tribology held between 15-16 th November, 2018 b. Two day national seminar on Metallurgy for Non-Metallurgists between 29-30, 2015 held at MGIT, Hyderabad. c. Two week workshop on Latest developments in Hydraulics, Pneumatics and electronic control systems held during 4-16 May 2015 at M.G.I.T, Gandipet, Hyderabad d. One week STTP on Experimental Designs for Optimization organized by Osmania University during, Hyderabad, 19 th -23 rd May,2014. e. One week ISTE-SRM Short term training programme on Mechatronics organized by Mahatma Gandhi Institute of Technology, Hyderabad, 5 th 10 th May 2014. f. 4-day programme at 1 st world parliament on spirituality, 17-21 Dec 2012 at Hyderabad. g. Two day conference on Mind-Body-Medicine held at Hyderabad on 12 th & 13 th Feb, 2011 h. One week workshop on STTP on Mechatronics at M.G.I.T, Gandipet, Hyderabad during 12th 16th July 2010 i. Two week workshop on Nano materials and Mechanics at JNTU,Kukatpally held from 22 nd June 3 rd July 2009
j. Two week Faculty Training Programme on Effective Communication held at MGIT, Gandipet during 20 June 2005 30 June 2005. k. AICTE/ISTE Shot term training programme on Robotics & Automation System organized by Mahatma Gandhi Institute of Technology, Hyderabad, 2nd 7th June 2003 l. Short term training programme on Finite Element methods and applications held on August 1998 at CBIT, Hyderabad. m. Short term training programme on Computer Aided Designing and Analysis held on 16-27th August 1999 at CBIT, Hyderabad. n. 3- Day Entrepreneurship Awareness Camp held on 17-19th August 2000, at CBIT & MGIT, Hyderabad, organized by center for Bharatiya Marketing Development, supported by Dept. of Science & Technology. o. AICTE/ISTE Short term training programme on Robotics & Automation System organized by Mahatma Gandhi Institute of Technology, Hyderabad, 2nd 7th June 2003 p. Two week refresher course on Engineering Mechanics and Engineering Graphics organized by JNTU and ISTE between 21-31 Oct, 1998 q. Two months training programme on Finite Element analysis (ANSYS-5.0) Engineers Cadd centre, April June, 1995 r. One month training programme on AutoCAD ver.12 at Institute of Infocad, 1994 20. MEMBERSHIP OF PROFESSIONAL BODIES: o Indian Society for Technical Education Life Member (ISTE) LM 35549, 2003 o Indian institute of Welding(IIW) Life member (VIZ/M/R-11366/L), 2010 o American Society for Mechanical Engineers (ASME) 102092304, 2017 21. ANY OTHER CONTRIBUTION/INFORMATION: a) Reviewer for CAD/CAM text book by P.N. Rao (Mc Graw Hill) b) Reviewer for following journals 1. Journal of the Brazilian Society of Mechanical Sciences and Engineering (Springer) 2. Part B: Journal of Engineering Manufacture (SAGE) 3. Journal of Materials Engineering and Performance (Springer) 4. World journal of Engineering (Emerald publishing) c) Session chair at IMECE, ASME conference held at TAMPA, Florida, USA d) Guided 49 B.Tech projects e) Alumnus at IIT Bombay (2003-06) f) Participated in India Innovation Challenge Design Contest 2018 conducted by IIM, Bangalore g) P.G. Diploma in Value Education and Spirituality 22. Patents filed: 1 Dr. Vakada Venkata Naga Satya Suresh, Srinivasa Prakash Regalla A Novel Deep Drawing Tooling With Selective Heating And Cooling For Tailor Welded Blanks (TWBs) Indian Patent Application No. 4038/CHE/2015, August 04, 2015
23. Grants received: 02 1) Dr. V.V.N. Satya Suresh received research grant of Rs. 4.8 lakhs from UGC towards minor research project titled Evaluation of formability characteristics of Tailor welded blanks to satisfy performance criteria and optimize the Deep Drawing process parameters using Design of Experiments (DoE) and comparing with the Finite Element simulation model with grant no. F MRP-6160/15 (SERO/UGC)for the period between Jan 15-Jan 17 2) Dr. V.V.N. Satya Suresh received travel grant from UGC towards presenting paper at the 19 th ESAFORM conference held at Nantes, France between 27-29 th April, 2016