Products Planning Prices emcotherm quick selection catalogue 2017/18 Convectors. Grids. fan coils Price list is valid from 01.04.2017 emco Klima creates atmosphere.
emcotherm emcotherm price list 2017/18 All prices are in EUROS and do not include VAT. This price list supersedes all previous information regarding prices and conditions. We reserve the right to change prices and technical details. Please refer to our general conditions of business, delivery and payment. Product orders with a value of 400,- Euros or less are subject to a processing fee of 100,- Euros. emcotherm price list 2017/18 Technical details as of: 10.04.2017 We reserve the right to change prices and technical details.
110
emcotherm part 2.3 part 2.1.0 Basics Contents part 2.1.1 model CN emcotherm cassette fancoils model DKK Product descriptions, method operation, system structure 112-113 Cooling and heating performance data, ventilation 114-115 Specifications 116 Control system 117-118 Exploded view 119 Dimensions 120 Remote control 121 part 2.1.2 model CV model KQKM model KQKL Accessories, prices 122 Version key, price list 123 part 2.1.5 model KIQ part 2.4 Chilled beam part 2.3 fancoils 111
Model DKK cassette fan coils with forced convection cooling, heating and ventilation. 2-pipe system with primary air connection. TECHNOLOGY emcotherm DKK emcotherm DKK cassette fancoils complete the range of indoor climate systems available from emco and are the perfect addition to emcotherm and cabinet as well as chilled beams. Their compact design, which has been speciically tailored for conformity to the standard Euroraster system, has a virtual invisible installation in suspended ceilings. The attractively designed air inlet grille and the outlet lamellae are the only visible components. The range covers cassette fancoils ofering various capacity levels with panel dimensions of (L x W) 650 x 650 mm in the case of individual panels (DKK03 - DKK08) or 650 x 1220 mm in the case of double panels (DKK09 - DKK16). Two media connections positioned at the side are responsible for supplying the cooled or heated media (which is already present at the site). The integrated coil has been designed for a 2-wire system. The cold water ceiling panels are controlled by an infrared remote control as standard. This enables straightforward operation of the devices without the need to install any additional electrical component. Connecting multiple devices by means of a bus line allows for centralised control of up to 32 devices (master/ slave). Control via the BMS (0 10 V) is available as an option. Application areas Oice and administrative buildings Shops and showrooms Exhibition rooms Rooms with high thermal loads Reception areas and foyers Meeting and conference rooms Product benefits Elegant solution for integration into ceilings Dimensions conforming to Euroraster format Quick and easy to install Quiet operation Device structure that is easy to maintain Attractive design Low construction height High thermal outputs Wide range of accessories available Ceiling panel available in all RAL colour schemes Master/slave function for centralised Control of up to 32 devices possible Provided as standard Infrared remote control Additional air outlet for separate grille Programmable 24-hour timer function Integrated condensate pump (up to 800 mmws) Master-/slave function and potential-free contact on control circuit board 112
part 2.1.0 Basics Method operation The images shown provide an example of how fancoils can be integrated into the existing water system at site (water chiller/heatpump unit and pipework are not included in the emco scope of supply). System structure Space 1 Space 2 Space 3 Condensate line Condensate line Condensate line Condensate collection line part 2.1.1 model CN part 2.1.2 model CV An individual cassette unit functions as follows: The room air is extracted via the air inlet grille using a 3-speed fan motor. In the case of cooling operation, temperature exchange takes place at the integrated cooling coil. The supplied warm room air is cooled by means of the cooling coil, through which cooled water flows, and the cooled air is fed back into the room. Where heating is concerned, the room air is warmed up to the correct set temperature. For cooling purposes, what is known as a swing function is used to enable improved air distribution in the room. A condensate drain pan and a condensate pump with a maximum capacity height of 800 mmws are installed inside the device to deal with any condensate that is produced. Exterior fancoil Infrared remote control fancoil Infrared remote control fancoil Water outlet Wired wall pad model KQKM model KQKL part 2.1.5 model KIQ part 2.4 Chilled beam An optional valve assembly can be used with the emcotherm DKK to control how it interacts with the water supply. When heating or cooling capacity is required, a 3-way valve opens the path for the medium to the heat exchanger. If no thermal functions are required at that point, the medium is led past the cassette and back to the chiller. This ensures a minimum volume flow (see Diagram of medium circuit ). To improve the quality of the room air, primary air can be supplied by means of a connection option designed specifically for this purpose. In addition to this, the emcotherm cassette fancoil offers the option of supplying an adjacent room at the same time by means of a pipe system, using circulated air (see fig. emcotherm DKK ventilation on page 114). Diagram of hydraulic circuit Circulated air Heat exchanger Chiller or heatpump Water inlet ter inlet connection Valve assembly (accessory) Water outlet part 2.3 fancoils 113
Quick selection performance data model emcotherm DKK Cooling and Heating Size DKK 03 DKK 04 DKK 06 Fan stage silent min med max turbo silent min med max turbo silent min med max turbo Sound-intensity level [db(a)] emcotherm DKK ventilation L WA 31 35 38 41 45 31 42 50 53 57 31 40 42 50 54 Input wattage [W] P el 8 9 10 11 15 8 12 21 27 45 8 10 12 21 31 System temperatures: Flow: 6 C, Return: 12 C, Room temperature: 26 C, Relative air humidity: 50% Supply air temperature [ C] t sup 10,3 10,9 11,3 11,7 12,2 10,3 11,9 12,8 13,2 13,7 11,1 12,3 12,6 13,5 14,0 Water mass low rate [l/h] m W 198 226 247 273 316 198 288 362 399 451 240 320 347 433 485 Pressure loss, water [kpa] p W 1,4 1,8 2,0 2,4 3,1 1,4 2,7 4,0 4,7 5,8 1,5 2,4 2,8 4,1 5,0 Cooling power sensitive [W] Q sens 868 1001 1105 1235 1458 868 1315 1704 1908 2214 1071 1477 1621 2104 2427 Kühlleistung latent [W] Q lat 520 579 622 673 754 520 704 831 885 945 608 761 806 926 970 Cooling power total [W] Q ges 1388 1579 1727 1908 2211 1388 2019 2535 2793 3158 1680 2238 2427 3031 3397 System temperatures: Flow: 16 C, Return: 18 C, Room temperature: 26 C, Relative air humidity: 50% Supply air temperature [ C] t sup 17,7 18,0 18,2 18,4 18,7 17,7 18,5 19,0 19,2 19,5 18,1 18,7 18,9 19,4 19,7 Water mass low rate [l/h] m W 197 227 251 280 331 197 299 387 434 503 243 336 368 478 552 Pressure loss, water [kpa] p W 1,4 1,8 2,1 2,5 3,4 1,4 2,8 4,4 5,4 7,1 1,5 2,6 3,1 4,9 6,3 Cooling power sensitive [W] Q sens 459 530 585 654 772 459 697 903 1012 1174 567 783 859 1116 1287 Kühlleistung latent [W] Q lat 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Cooling power total [W] Q ges 459 530 585 654 772 459 697 903 1012 1174 567 783 859 1116 1287 System temperatures: Flow: 75 C, Return: 65 C, Room temperature: 20 C Supply air temperature [ C] t sup 64,9 63,4 62,5 61,5 60,1 63,5 59,7 57,6 56,6 55,2 61,5 58,8 58,0 55,7 54,2 Water mass low rate [l/h] m W 215 249 277 311 369 208 322 420 472 550 260 363 399 522 604 Pressure loss, water [kpa] p W 1,4 1,8 2,1 2,6 3,5 1,4 2,8 4,4 5,3 7,0 1,5 2,5 3,0 4,7 6,1 Heating power total [W] Q sens 2504 2909 3227 3624 4304 2429 3753 4905 5510 6414 3031 4233 4659 6091 7042 System temperatures: Flow: 55 C, Return: 45 C, Room temperature: 20 C Supply air temperature [ C] t sup 46,9 46,1 45,5 44,9 44,0 46,1 43,8 42,4 41,8 40,9 44,9 43,2 42,7 41,2 40,3 Water mass low rate [l/h] m W 129 150 166 186 221 125 193 251 281 326 156 217 238 310 357 Pressure loss, water [kpa] p W 0,7 0,8 0,9 1,1 1,5 0,6 1,2 1,8 2,2 2,8 0,7 1,1 1,3 1,9 2,5 Heating power total [W] Q sens 1505 1746 1935 2171 2574 1459 2247 2927 3281 3805 1818 2532 2782 3619 4165 Additional room connection (circulated air) max. 7 m Fresh air connection (primary air) Fresh air intake Main room Additional room Internal External 114
part 2.1.0 Basics DKK 08 DKK 10 DKK 12 DKK 16 silent min med max turbo silent min med max turbo silent min med max turbo silent min med max turbo 31 50 51 55 57 36 39 42 44 48 36 45 51 54 58 36 51 53 56 58 8 21 25 37 48 11 13 14 18 26 11 20 40 53 90 11 39 49 72 93 part 2.1.1 model CN part 2.1.2 model CV Flow: 6 C, Return: 12 C, Room temperature: 26 C, rel. Luftfeuchtigkeit: 50% 11,5 13,8 14,1 14,6 14,9 11,3 11,8 12,2 12,6 13,3 10,7 12,3 13,3 13,7 14,3 11,3 13,8 14,1 14,6 15,0 260 464 488 532 559 446 506 556 615 707 392 571 712 769 864 445 795 836 907 949 1,7 4,6 5,1 5,9 6,5 0,4 0,5 0,6 0,7 1,0 0,9 1,8 2,6 3,0 3,7 1,2 3,1 3,4 4,0 4,3 1170 2292 2445 2744 2954 2001 2304 2561 2880 3395 1733 2640 3425 3768 4392 1994 3928 4198 4710 5051 648 956 972 978 959 1124 1240 1329 1427 1554 1013 1354 1560 1617 1659 1121 1636 1655 1642 1589 1819 3248 3417 3722 3913 3124 3543 3889 4307 4950 2746 3994 4985 5385 6051 3115 5564 5853 6352 6641 Flow: 16 C, Return: 18 C, Room temperature: 26 C, rel. Luftfeuchtigkeit: 50% 18,3 19,5 19,7 19,9 20,1 18,2 18,5 18,7 18,9 19,2 17,9 18,7 19,2 19,4 19,7 18,2 19,5 19,6 19,9 20,1 266 521 556 624 671 456 525 584 658 777 394 602 783 863 1007 454 900 962 1081 1161 1,8 5,7 6,4 7,9 9,0 0,5 0,6 0,7 0,8 1,1 0,9 1,9 3,1 3,6 4,8 1,2 3,9 4,4 5,5 6,2 620 1216 1297 1455 1566 1063 1225 1363 1535 1812 920 1405 1828 2013 2351 1060 2099 2246 2523 2708 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 620 1216 1297 1455 1566 1063 1225 1363 1535 1812 920 1405 1828 2013 2351 1060 2099 2246 2523 2708 Flow: 75 C, Return: 65 C, Room temperature: 20 C 62,0 55,9 55,2 53,8 52,8 64,0 62,2 61,0 59,7 58,0 70,7 64,7 61,7 60,6 58,6 71,5 62,6 61,7 60,0 58,8 294 587 627 704 757 520 596 661 744 879 499 750 976 1076 1260 606 1194 1279 1439 1545 1,8 5,8 6,6 8,1 9,2 0,5 0,6 0,7 0,9 1,2 1,2 2,4 3,7 4,5 5,9 1,6 5,4 6,1 7,6 8,6 3427 6852 7314 8212 8826 6062 6952 7716 8677 10255 5816 8748 11381 12549 14697 7070 13932 14921 16792 18030 Flow: 55 C, Return: 45 C, Room temperature: 20 C 45,2 41,3 40,8 39,9 39,2 46,3 45,2 44,5 43,7 42,6 50,3 46,7 44,8 44,1 42,8 50,8 45,2 44,7 43,6 42,8 176 348 371 414 443 311 356 395 443 522 298 447 579 638 744 362 707 756 849 909 0,8 2,4 2,6 3,2 3,6 0,2 0,3 0,3 0,4 0,5 0,5 1,0 1,5 1,8 2,3 0,7 2,1 2,4 2,9 3,3 2054 4061 4325 4833 5174 3625 4152 4603 5168 6092 3482 5216 6759 7440 8682 4228 8252 8824 9901 10608 model KQKM model KQKL part 2.1.5 model KIQ part 2.4 Chilled beam part 2.3 fancoils 115
Specifications emcotherm DKK Series Unit DKK03EC DKK04EC DKK06EC DKK08EC DKK10EC DKK12EC DKK16EC Operating mode Cold water cassette fancoil with EC fans in single Euroraster format 2-pipe version Application area (room volume), approx. m³ 70 90 120 150 200 240 300 Room temperature adjustment range C +16 to +30 Internal device working range C/% RH +15 to +35/30 to 90, non-condensing Power supply V AC/Hz 230/1~/50 Degree of protection IP X0 Electr. nominal current consumption 1) A 0.12 0.30 0.21 0.32 0.20 0.59 0.62 Operating medium Operating limits, cooling medium Operating limits, heating medium Operating pressure, max. medium Water; max. 35 % ethylene glykol, max. 35 % propylene glykol C +4 to +18 C +35 to +80 kpa 1400 Minimum low temperature, heating C +28 Nominal low volume, cooling medium 1) m³/h 0.45 0.55 0.78 0.91 0.98 1.45 1.66 Nominal low volume, heating medium 2) m³/h 0.45 0.55 0.78 0.91 0.98 1.45 1.66 Nominal pressure losses, internal 1) kpa 10.20 15.00 25.10 23.10 29.7 40.0 49.4 Nominal pressure losses, internal 2) kpa 10.20 15.00 25.10 23.10 29.7 40.0 49.4 Water connection, inlet inches 3/4 internal Water connection, outlet inches 3/4 internal Water volume l 1.3 1.8 2.1 3.2 3.2 Condensate connection mm 19 Condensate pump, max. capacity mmwc 1000 Dimensions Height mm 258 258 258 298 298 298 298 Width mm 580 Depth mm 580 1100 Dimensions Grille Height mm 28 Grille Width mm 650 690 Grille Depth mm 650 1220 Gross weight kg 28.0 28.0 28.0 31.0 56.6 58.1 58.1 Operating weight, approx. kg 29.3 29.3 29.3 32.8 58.7 61.3 61.3 1) Air inlet temperature TK 26 C/FK 19 C, medium inlet 6 C, medium outlet 12 C. 0% glycol concentration, max. air volume low 2) Air inlet temperature TK 20 C, medium inlet 55 C, medium outlet 45 C. 0% glycol concentration, max. air volume low 3) Distance of 1 m, free ield conditions 116
part 2.1.0 Basics As standard: 5-stage internal regulation part 2.1.1 model CN Supply voltage 230 V 50 Hz Bus line Bus line Bus line part 2.1.2 model CV Master Slave Slave Slave model KQKM max. 6 m model KQKL Individual system Max. 32 stations in combination part 2.1.5 model KIQ As standard: 3-stage external regulation Supply voltage 230 V 50 Hz part 2.4 Chilled beam Enable stage 1 230 V AC or 24 V AC Enable stage 2 230 V AC or 24 V AC Enable stage 3 230 V AC or 24 V AC Valve control 230 V AC or 24 V part 2.3 fancoils 117
As standard: 0 10 V DC external regulation Supply voltage 230 V 50 Hz External regulation 0 10 V DC Valve control 230 V AC or 24 V Optional control via emcomfc. Electrical control: E7 in version key. Supply voltage 230 V 50 Hz emcobus, max. 30 stations emcomfc -EC-B emcomfc -EC-B emcomfc -EC-B emcomfc-lc 118
part 2.1.0 Basics Exploded view emcotherm DKK-E part 2.1.1 model CN 1 3 5 7 8 8 2 4 6 1. Sensor antifreeze 2. Fan motor 3. Coil 4. Kondensate hose 5. Fan blade 6. Condensate pump (complete) 7. Condensate drain pan 8. Air inlet (assembly) 9. Finger guard grille with circulated air sensor 10. Grille 11. Outlet louver 12. Swing motor 13. Air filter (can be easily serviced via the front of the device)) 14. Air inlet grille (easy to open and fold down for inspection purposes) 15. Transformer 16. Fan capacitor 17. Control circuit board 18. IR remote control part 2.1.2 model CV model KQKM model KQKL 9 10 part 2.1.5 model KIQ 10 11 13 12 part 2.4 Chilled beam 14 15 16 17 18 part 2.3 fancoils 119
emcotherm DKK-E Dimensions for models 03 to 08 emcotherm DKK-D Dimensions for models 09 to 16 650 280 60 1220 650 615 emcotherm DKK-E Dimensions for models 03 and 04 258 100 580 150 185 207 690 810 580 615 Condensate connection 19 mm 28 ter outlet: 3/4 IG Water inlet: 3/4 IG 1110 Condensate connection 19 mm 298 100 250 135 195 100 emcotherm DKK-E Dimensions for models 06 and 08 28 Water outlet: 3/4 IG Water inlet: 3/4 IG 298 100 580 190 230 245 Condensate connection 19 mm 28 Water outlet: 3/4 IG Water inlet: 3/4 IG All values in mm 120
part 2.1.0 Basics Infrared remote controller (standard accessory For cooling, heating, ventilation and dehumidifying purposes emcotherm cassette fancoils can be controlled automatically or manually by the enduser. Setting the required room temperature, based on a timer function by the simple touch of a button. If multiple cassette fancoils are being used in a room or building, an infrared remote control can be used for all the devices as part of an internal network. A wired remote control enables each individual ceiling panel to be addressed and programmed individually within an internal network (master/slave). The optional three-way valve assembly, or a valve assembly that has been adapted to it the system in question, can be used to control the low of the water supply. Internal network Up to 32 devices can be operated simultaneously thanks to the parallel connection system by means of a bus line (accessory). The devices can all access this internal network in parallel. The network may consist of one master device and up to 31 slave devices. Network with infrared remote controls The infrared remote control (supplied as standard) operates a master device. All of the slave devices are set in accordance with the programming conigurations. Customised operation of each individual slave device can be carried out using the infrared remote control or the wired remote control (accessory). A master s device address is determined according to whether a JP0 jumper is positioned on the control circuit board or device jumper is not positioned. Network with wired remote controls (optional accessories) The wired remote control (available as an accessory) operates a master device. All slave devices with wired remote controls can be programmed individually and directly or as an entire group from the master device. Customised operation of each individual slave device can be carried out using the wired remote control. The master and slave devices are addressed via the wired remote control coniguration settings. part 2.1.1 model CN part 2.1.2 model CV model KQKM model KQKL part 2.1.5 model KIQ part 2.4 Chilled beam part 2.3 fancoils 121
emcotherm wired remote control Article-No. 6 R DKK Wired remote control for controlling emcotherm cassette fancoils DKK, incl. 5 m connector cable. Manual selection of operating modes ( Cooling, Heating, Dehumidifying, Timer, Automatic ) manual or automatic control of the fan speed. Enables up to 32 panels to be controlled on an individual basis in a separate network. Order-No. Price / unit 870-4024 101.- Longer distances can be bridged compared to the infrared remote control. emcotherm external condensate pump Article-No. 2 ZUB DKK 00 KP Additional external condensate pump Max. capacity of 294 l/h, max. delivery head of 4.3 m. Dimensions: 288 mm x 127 mm x 178 mm Order-No. Price / unit 870-4023 295.- 3-way valve assembly for DKK-E Article-No. 6 V 3WV 01 Water-side control by means of 3-way valve assembly for easy and quick installation, suitable for models 03, 04, 06, 08. Consisting of: 1 x thermal actuator 1 x 3-way valve DN 15 2 x shut-of valves 1 x tee DN 20 1 x stainless steel corrugated pipe incl. screw connections and associated sealing material. Order-No. Price / unit 870-4026 305.- 3-way valve assembly for DKK-D Article-No. 6 V 3WV 02 Water-side control by means of 3-way valve assembly for easy and quick installation, suitable for models 09, 10, 12, 16. Consisting of: 1 x thermal actuator 1 x 3-way valve DN 25 2 x shut-of valves 1 x tee DN 25 1 x stainless steel corrugated pipe incl. screw connections and associated sealing material. Order-No. Price / unit 870-4027 439.- 122
part 2.1.0 Basics Version key Charac. 2 = emcotherm 1 DKK = fancoil 2-4 E = Single panel D = Double panel 5 03 = Power version 3 panel dimension 650x650 04 = Power version 4 panel dimension 650x650 06 = Power version 6 panel dimension 650x650 08 = Power version 8 panel dimension 650x650 10 = Power version 10 panel dimension 690x1220 12 = Power version 12 panel dimension 690x1220 16 = Power version 16 panel dimension 690x1220 6-7 E6 = EC-technology 5-stage (infrared wired remote control) E7 = emcomfc EC-B junction box E8 = EC-S junction box 8-9 0000 = Front panel made of plastic, similar to RAL 9003 YYYY = Special surface 10-13 part 2.1.1 model CN part 2.1.2 model CV model KQKM model KQKL Product group Article Variant Power version Electrical control Surface front panel part 2.1.5 model KIQ 2 DKK E 03 E6 0000 = Example Price list part 2.4 Chilled beam Productb group emcotherm Article emcotherm model Power version Electrical connection Surface front panel (0000 = unpainted) Price per unit part 2.3 fancoils 2 DKK-E 03 E6 0000 992.- 04 1.007.- 06 1.022.- 08 1.037.- 2 DKK-D 10 1.325.- 11 1.345.- 12 1.365.- 2 DKK-E 03 E7 0000 1.192.- 04 1.207.- 06 1.222.- 08 1.237.- 2 DKK-D 10 1.525.- 11 1.545.- 12 1.565.- 123
General terms and conditions of sale, delivery and payment 1. Introduction: These General Terms and Conditions of Sale, Delivery and Payment shall apply exclusively unless they are amended in any express written agreement. Quotations, acceptance of quotations or sale of any goods shall be subject to these terms and conditions. Any terms and conditions of the purchaser or provisions of the purchaser that are contradictory to these terms and conditions shall, even if they are known, be rejected. These terms and conditions shall furthermore provide the basis for all future transactions. Notice pursuant to Section 33 of the Federal German Data Protection Act (BDSG): Personal data from contracts shall also be held on computer. 2. Orders and quotations: All user quotations and delivery options are subject to confirmation. Orders shall only be deemed to have been accepted if they are accepted in writing within 21 days of submission (also by invoice or delivery note). The scope of delivery shall be governed exclusively by the written order confirmation. The purchaser shall bear responsibility for the accuracy of the order. If goods need to be manufactured, processed or treated, the purchaser shall be required to make good any damage that is caused because such contractually agreed processing or treatment of the goods, carried out on the basis of the purchaser s specification, is shown to be a breach of patent, copyright, trademark or other property right of a third party. 3. Prices and pricing: Unless prices are agreed for products, the list prices, plus value-added tax, shall apply that are in effect on the day of delivery. All prices are ex-works and exclude packaging. Tolerances in quantities delivered shall be permissible if they are in a reasonable proportion to the total quantity (plus/minus 10%). 4. Delivery of goods: Deliveries shall be made ex-works for the account and at the expense of the purchaser. If goods are kept in store for the sole disposal of the purchaser (call-off items), the purchaser shall be in default if, without being reminded, it fails to take delivery of such goods within the agreed period. 5. Delivery time: The delivery dates or delivery periods stated in the order confirmation indicate the earliest possible delivery time and are without obligation. Set calendar delivery dates shall only be binding if they have been expressly confirmed in writing. Delivery periods shall commence on the day on which the order confirmation is dispatched, however not before the submission of any documents, approvals, clearances to be furnished by the purchaser or before receipt of any agreed deposit payment. The delivery period is met once the goods have left the factory or notice is given that they are ready for shipment. 6. Passing of risk: The risk of goods becoming damaged or lost shall pass to the purchaser as soon as the goods have left the user s factory, this also being the case if part shipments are made. If the user has undertaken to deliver the goods to the purchaser, the purchaser shall bear the risk of transportation even if Incoterms to the contrary are agreed. If shipment is delayed for circumstances for which the purchaser is responsible, the risk shall pass to the purchaser as from the day on which the goods are ready for shipment. Goods shall be stored on the purchaser s account and at the purchaser s risk. Items delivered must be accepted by the purchaser without prejudice to the purchaser s rights. 7. Notification of defects: It shall not be possible to give notice of defects that the purchaser could have established if care had been exercised when delivery was taken or initial sample inspection had taken place. Even if selection samples have been sent, the purchaser must inspect the goods without delay on arrival and give notice of any defects in writing or the warranty will be void. Notice of complaints must be given in writing before the goods are processed, contain an exact description of the alleged claim or flaw and be accompanied by packing slips. The quality of the goods shall be considered to have been approved if the user does not receive a written notice of defects within 7 working days of the goods arriving. 8. Warranty: The user shall not assume any responsibility for the good being suitable for a specific purpose. If the item supplied is faulty or if it lacks warranted qualities or if it becomes defective within a warranty period as a result of manufacturing or material flaws, the user shall, in its equitably exercised discretion, be able to rectify defects or make a new delivery on return of goods already delivered. If it is not possible to remedy the defect or if such would involve unreasonable effort and expense, the purchaser may only demand a reduction in payment. The purchaser shall, by way of exception, also be able to demand a reduction in payment if it cannot be reasonably expected to remedy the defect. The user must be given the opportunity to locate the defect brought to its notice. On request, complaint goods must be returned without delay. Replaced parts shall become the property of the user. The latter shall take no responsibility for inappropriate or improper use, for incorrect assembly or repair by the purchaser or third party, for natural wear, improper or negligent treatment or for improper maintenance. If rectification is made by the purchaser or any third party, the user shall not be liable for any consequences that may arise therefrom. The same shall apply to any modifications that are made to the delivery item without the user s prior consent. If, within a reasonable period, warranty obligations are not met or not met in the manner agreed, the purchaser shall be able to set a final deadline in writing. If this deadline expires without result, the purchaser shall be able to make the necessary rectification itself or place rectification in the hands of a third party. If rectification has been carried out successfully by the purchaser or a third party, all claims on the part of the purchaser shall be settled upon reimbursement of the costs incurred by it. Only the user s product description shall be considered as the agreed quality of the goods. If the purchaser receives deficient assembly instructions, the user shall only be obliged to supply assembly instructions free of any deficiency if the deficiency in the assembly instructions prevents proper assembly. 9. Restrictions on liability: If the purchaser incurs damage as a result of a delay for which the user is responsible, the purchaser shall, to the exclusion of further claims, be entitled to demand compensation for damage caused by the delay. This shall amount to 0.5 per cent for each full week, however in total no more than 5 per cent of the value of that part of the overall shipment which, on account of the delay, cannot be used in time or as agreed. If, through fault on the part of the user as a result of failing to implement or of incorrectly implementing proposals or deliberations coming about before or after entering the contract, or as a result of infringing other contractual accessory obligations in particular, instructions on operating and maintaining the delivery item the delivery item cannot be used by the purchaser as agreed, the arrangements set forth in clause 8 of these terms and conditions and the following arrangements shall be applicable to the exclusion of further claims. The user shall only be liable for damage, including damage not occurring on the delivery item itself, if such is caused as a result of intent, of gross negligence, of a culpable harm to life, limb and health, of defects that the user has fraudulently concealed or whose absence it has guaranteed, of defects in the delivery item insofar as product liability law provides for liability for personal injury and damage to property caused by privately used objects. Liability for each occurrence of damage - for whatever legal ground - shall be limited to an amount of 30% of the order value. Any liability above and beyond this amount shall be ruled out. 10. Acts of God: Acts of God, industrial disputes, riots, government action, delivery stoppages or other unforeseeable, unpreventable and serious events shall release the user from its obligations for the duration of the disturbance and to the extent of the effect this disturbance has. This shall also apply if these events occur at a time at which the user is in default. The user shall, to the extent reasonably expected of it, immediately provide the necessary information and adapt its obligations in good faith to the changed circumstances. 11. Terms of payment: Unless otherwise agreed, all payments shall be due in the full amount upon delivery or upon acceptance of delivery. Without further notification, the purchaser shall be in arrears 30 days after the due date if payment is not made. The user grants 3% cash discount on payments made within 7 days of the invoice date provided the purchaser is not in arrears with the settlement of accounts receivables from preceding consignments of goods at the time of payment. If payment, or also part thereof, is not received by the user within 30 days, the purchaser shall not be entitled to cash discount. Bills of exchange will only be accepted on the basis of written agreement and only on account of performance without liability for protest. The purchaser may not offset counterclaims and has no right of retention on the basis of these claims unless the purchaser s claims are undisputed or final and absolute. 12. Default in payment and deterioration in purchaser solvency: If the purchaser is in arrears with the payment of amounts invoiced for transactions already delivered, the user shall be able to make delivery of outstanding orders contingent on the settlement of due invoices or on advance payment of the purchase price or withdraw from the contract. The same right shall exist if, after entering the contract, a significant deterioration becomes known in the purchaser s financial circumstances. The agreed payment dates must still be observed even if warranty claims are put forward. In the event that the purchaser defaults in payment and composition or insolv-ency proceedings are instigated against it in or out of court, discounts granted as well as freight reimbursements shall be withdrawn. The same legal consequences shall ensue on the 31st day after the invoice becomes due. 13. Retention of title: The goods delivered by the user shall remain the user s property until it receives all payments due to it from the business relationship with the purchaser. If the purchaser acts in breach of contract, in particular if the purchaser falls into arrears, the delivery item may be repossessed; the purchaser shall undertake to surrender possession; it shall allow the user to collect and repossess its goods at any time. Repossessing a delivery item does not equate to withdrawing from the contract unless such is expressly declared in writing. In the event of attachment or other intervention by third parties, the purchaser shall be required to provide immediate notification so that opposition proceedings can be instituted to prevent execution. If the third party is not in a position to reimburse the judicial and extra-judicial costs of opposition proceedings, the purchaser shall be liable for the arising loss. The purchaser shall be entitled to resell the delivery item in the ordinary course of business. Even at this stage, the purchaser assigns to the user all claims against its buyers or third parties in the amount of the final invoice balance, including value-added tax, that arise from the resale, regardless of whether the goods have been resold without having been processed or after they have been processed. The purchaser is empowered to collect such claims even after assignment unless the user prohibits the purchaser from doing so. The user s power to collect the claim itself shall remain unaffected. The user shall, however, undertake not to collect the claim itself as long as the purchaser duly meets it payment obligations and is not in arrears. The user shall, at all events, be able to demand that the purchaser disclose the assigned claim and its debtors, provide all information necessary for collection, hand over the associated documents and notify the debtors of the assignment. The purchaser shall only process or refashion the goods for the user. If the goods are processed with other items, the user shall acquire joint ownership of the new article in the proportion of the value of the retained goods to the other processed items at the time of processing. In all other respects, the same shall apply to the article that is created as a result of processing as applies to the retained goods. If the goods are inseparably combined with other items, the user shall acquire joint ownership of the new article in the relation of the value of the goods to the other combined items at the time of combination. If combination takes place in such a manner that the purchaser s article must be regarded as the primary article, it shall be considered as agreed that the purchaser will assign proportional joint ownership to the user. The purchaser preserves sole ownership or joint ownership. The purchaser shall assign any claim to security accruing to it against any third party as a result of combining the goods with a piece of land. 14. Resale clause: The goods supplied may only be exported to those countries for which written clearance is given. Without consent, the purchaser must not sell to buyers known to have the intention of exporting the goods. This ban shall only apply if and to the extent by which it is covered by the EU Commission s notice on agreements of minor significance. In cases where goods are delivered abroad, the purchaser shall bear any risk arising from the applicability of laws and statutes in force abroad. 15. Warranty period and statute of limitation: The warranty period shall be 12 months from the time at which the goods are delivered under clause 4 of these terms and conditions. However, the consequences set forth in clause 7 of these terms and conditions shall apply if the purchaser fails to provide notification of the defect in good time. The warranty period for goods which, in accordance with their normal usage, have been used for an edifice and have caused its defectiveness, shall be five years. All claims on the part of the purchaser for whatever legal grounds, in particular claims for damages on account of goods being defective - shall become statute-barred after 12 months from the time of delivery. 16. Place of performance, legal venue and applicable law: The place of performance for all obligations arising from the contractual relationship shall be the place of business of the user. If the purchaser is a merchant, a legal person under public law or a special asset under public law, the legal venue for all legal disputes, including those arising as part of proceedings related to a bill of exchange or cheque, shall be the place of business of the user. The user shall also have the right to take legal action at the seat of the court having jurisdiction over the purchaser or at any other court that may have jurisdiction under national or international law. The contractual relationship shall be subject to German law. Application of the UNCITRAL sales convention (United Nations convention on the international sales of goods) shall be excluded. 17. Escape clause: Should individual provisions of these General Terms and Conditions of Sale, Delivery and Payment be or become ineffective, this shall not affect the validity of the remaining provisions. 01.10.001.26 02/06 160 emcotherm price list 2017/18 Technical details as of 10.04.2017 We reserve the right to change prices and technical details.
emco Your contacts worldwide Headquarter, Germany emco Bau- und Klimatechnik GmbH & Co. KG Breslauer Str. 34-38 49808 Lingen, Germany Tel. +49 (0)591-9140-0 Fax +49 (0)591-9140851 E-mail: klima@emco.de www.emco-klima.com part 2.1.0 Basics part 2.1.1 model CN part 2.1.2 model CV model KQKM model KQKL part 2.1.5 model KIQ Sales Offices Austria / Hungary / Slovakia / Slovenia / Croatia / Serbia / Bosnia-Herzegovina emco Bau- und Klimatechnik Vertriebsgesellschaft mbh Johnstraße 4, Top B3 A-1150 Wien Tel. +43 (0) 1-4 93 38 80 Fax +43 (0) 1-4 93 38 80 17 e-mail: ffice@emco-klima.at Switzerland / Liechtenstein A. Bachmann AG Oberfeld 19 CH-6037 Root Tel. +41 (0) 41-455 61 20 Fax +41 (0) 41-455 61 29 e-mail: info@abach.ch Luxembourg Emco Bau- und Klimatechnik GmbH & Co. KG Vertriebsbüro NRW Breslauer Str. 34-38 D 49808 Lingen Tel. +49 (0) 5 91-91 40-613 e-mail: k.h.schneider@emco.de Belgium AIR-G s.p.r.l. Rue Roosevelt 20 Bte D B 4650 Herve Tel. +32 (0) 87 33 25 63 e-mail: jean-marie.gerson@air-g.be France Viviane Ghibely 14 Route de Paray F 91320 Wissous Tel. +33 (169) 751 628 e-mail: bureau@ghibely.fr Poland / Estonia / Latvia / Lithuania emco Polska Sp. z o.o. Ul. Makowskiego 1 02-784 Warszawa Tel. +48 (022)-741 28 05 e-mail: t.stanuch@pl.emco.de Russia / Ukraine Emco Bau- und Klimatechnik GmbH & Co. KG Office 105, bld 1, 16 Polessky proezd RUS 125367 Moscow Tel. +49(171) 300 42 90 e-mail: i.ginsburg@emco.de China Emco Building Technology (Chezhou) Ltd. Shanghai Office Room 1502 Building 1 No. 833 South Hongmei Road Shanghei China Tel. +86 550 3567 500 e-mail: w.ye@emco.de Canada H T S Toronto 115 Norfinch Drive CAD Toronto ON M3N 1W8 Tel. +1 416 661 3400 e-mail: paul.povolo@hts.com part 2.4 Chilled beam part 2.3 fancoils part 2.1.4 Control technology Accessories part 2.2- Gratings emco Terms of trading Contacts emcotherm price list 2017/18 Technical details as of 10.04.2017 We reserve the right to change prices and technical details. 161
emco Bau- und Klimatechnik GmbH & Co. KG Air conditioning technology division Breslauer Straße 34-38 D - 49808 Lingen (Ems) Germany Tel. +49 (0) 591 9140-0 Fax +49 (0) 591 9140-851 klima@emco.de www.emco.de a subsidiary of EN-855-5340/0417 - The right of technical modiication is reserved without prior notice.