Curriculum Vitae Paolo Martinelli Personal Data Birthdate: 3 April 1978 Birthplace: Iseo (BS), Italy Married Office Address Department of Civil and Environmental Engineering Politecnico di Milano Piazza L. da Vinci 32 20133, Milano (MI), Italy Tel: +39 02 2399 8785 Fax: +39 02 2399 8771 Email: paolo.martinelli@polimi.it Academic Position 10/2011- Assistant Professor, Department of Civil and Environmental Engineering, Politecnico di Milano. 06/2009-09/2011 Post-doc position (Assegnista di Ricerca), Department of Structural Engineering, Politecnico di Milano. 06/2008-06/2009 Post-doc position at the Commissariat à l Energie Atomique - Laboratoire d Etudes de Mécanique Sismique (Saclay, France). 02/2008-05/2008 Research activity at the Department of Structural Engineering of Politecnico di Milano financed by the CEA (Commissariat à l Energie Atomique). 06/2007-12/2007 Winner of a fellowship from Sovvenzione Globale Ingenio promoted by the European Social Fund, the ministry of Welfare and the Region Lombardia, the Department of Structural Engineering, Politecnico di Milano. 01/2006-09/2006 Visiting Scholar at the University of California, Berkeley. 03/2004-06/2007 PhD student, research assistant and teaching assistant, Department of Structural Engineering, Politecnico di Milano. Education 03/2004-06/2007 PhD degree in Structural, Earthquake and Geotechnical Engineering, Department of Structural Engineering, Politecnico di Milano (Italy). Final evaluation A cum Laude. Thesis title: Shaking Table Tests on RC Shear Walls: Significance of Numerical Modeling. 09/1997-07/2003 Master in Civil Engineering, Major in Structures, University of Brescia (Italy). Final grade: 110/110 cum Laude. Thesis title: Industrial RC Pavements with Traditional and Hybrid Steel Fibers (in Italian). 1
Teaching Activities Academic years 2014/2015 and 2015/2016: Instructor for the course Basic of Structural Design (3 credits) and Structural Design (6 credits) for students of Architectural Engineering. Academic years 2012/2013 and 2013/2014: Instructor for the course Structural Design (9 credits) for students of Architectural Engineering. Academic years 2013/2014, 2014/2015 and 2015/2016: Teaching assistant for the course Structural assessment and residual bearing capacity. Fire and Blast safety (Instructor Prof. R. Felicetti) for students of Master of Science Program in Civil Engineering (Civil Engineering for Risks Mitigation). (10 CFU - 10 hours). Academic years 2009/2010, 2010/2011, 2011/2012 e 2012/2013: Teaching assistant for the course Retrofitting design of structures subjected to seismic, impact and blasting loading (10 credits, Instructors: Ing. M. Valente, Ing. M. Colombo, Ing. L. Ferrara) for students of Master of Science Program in Civil Engineering. Academic years 2011/2012, 2013/2014, 2014/2015 e 2015/206: Instructor for the short course Introduction to the finite Element method (12 hours) for students of Five years course degree in Building Engineering and Architecture. Academic year 2011/2012: Teaching assistant for the course of Tecnica delle Costruzioni (Structural design), for students of Five years course degree in Building Engineering and Architecture. Instructor: Ing. M. Colombo. Academic years 2009/2010, 2010/2011 e 2011/2012: Teaching assistant for the course of Building construction in seismical areas, for students of Master of Science in Architectural Engineering. Instructor: Prof. M.G. Mulas. Academic years 2009/2010 and 2010/2011: Teaching assistant for the course of Laboratorio di Costruzioni, for students of Five years course degree in Building Engineering and Architecture. Instructors: G. Alderighi, M. Colombo, F. Iorio. Academic years 2006/2007 and 2007/2008: Teaching assistant and tutor for the course of Scienza delle Costruzioni A + B (Statics and Strength of Materials), for students of Chemical Engineering, Bachelor of Science Program. Instructor: Prof. M.G. Mulas. Academic year 2006/2007: Teaching assistant and tutor for the course of Meccanica dei Solidi e delle Strutture II (Mechanics of Solids and Structures), for students of Chemical Engineering, Master of Science Program. Instructor: Prof. M.G. Mulas. 2
Research Funding 2010-today: partecipation to the research project Reluis (Rete dei Laboratori Universitari di Ingegneria Sismica) on the study of the application of advanced cementitious materials in structural retrofitting for seismic improvement of buildings. 2009-2012: partecipation to the Interreg research project Accident (Advanced Cemetitious Composite In DEsign and construction of safe Tunnels: ID7629770 - Measure 2.2) on the safety of tunnel under extreme conditions (explosion and fire). Awards Winner of a 6-months fellowship from Sovvenzione Globale Ingenio promoted by the European Social Fund, the ministry of Welfare and the Region Lombardia (2007). Speaker at National and International Conferences M. di Prisco and P. Martinelli, 2014. A numerical approach for the evaluation of the structural redistribution coefficient KRd. In Computational Modelling of Concrete Structures - EURO-C 2014 Conference, St. Anton am Arlberg, Austria. M. di Prisco and P. Martinelli, 2014. Sulla determinazione del coefficiente di ridistribuzione strutturale KRd per strutture in calcestruzzo fibrorinforzato. Giornate aicap 2014, Bergamo, Italy. M. Colombo and P. Martinelli, 2011. SDOF models for RC and FRC circular plates under blast loads. In Protect 2011 - Performance, Protection and Strengthening of Structures under Extreme Loading, Lugano, Switzerland. P. Martinelli and M.G. Mulas, 2009. An innovative passive control technique for industrial precast buildings. In ANIDIS 2009 XIII Convegno Nazionale, L Ingegneria Sismica in Italia, paper ID 261 (on CD-Rom), Bologna, Italy. P. Martinelli and F.C. Filippou, 2007. Numerical Simulation of the Shaking Table Test of a Seven Story RC Shear Wall Structure. In ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, M. Papadrakakis, D.C. Charmpis, N.D. Lagaros, Y. Tsompanakis (Eds.), paper ID 1134 (on CD-Rom), Rethymno, Crete, Greece. P. Martinelli and F.C. Filippou, 2006. Numerical Simulation of the Shaking Table Test of a Full Scale, Seven Story Shear Wall Specimen. Analytical Model of Reinforced Concrete Walls, NEES/UCSD Workshop, San Diego, USA. 3
Scientific and Organizational Activities Conference Organization Vice-chair of Organizing Committee, Consec 2016 - Eight International Conference on Concrete Under Severe Conditions - Environment and Loading, 12-14 September 2016, Lecco, Italy. Reviewer Service Reviewer for the following ISI Journals: ACI Structural Journal, Advances in Structural Engineering, ASCE Journal of Structural Engineering, Structural Engineering and Mechanics, Materials and Structures, Engineering and Structures, European Journal of Environmental and Civil Engineering, KSCE Journal of Civil Engineering, Earthquake Engineering and Engineering Vibration. Additional Research/Teaching Activities Advisor and co-advisor for several Master theses for students of Master of Science Program in Civil Engineering, and Master of Science Program in Architectural Engineering. Teacher for the course La gestione tecnica dell emergenza sismica - rilievo del danno e valutazione dell agibilità - Il comportamento delle strutture in c.a. Meccanismi di danno. Pubblications International Journals A1. di Prisco, M., Martinelli, P., Parmentier, B. On the reliability of design approach for FRC structures according to MC2010: the case of elevated slabs (2016) Structural Concrete (Article Online - DOI: 10.1002/suco.201500151). A2. di Prisco, M., Martinelli, P., Dozio, D. The structural redistribution coefficient KRd: a numerical approach to its evaluation (2016) Structural Concrete (Article Online - DOI: 10.1002/suco.201500118). A3. Colombo, M., Martinelli, P., di Prisco, M. On the blast resistance of high performance tunnel segments (2016) Materials and Structures, 49, pp. 117-131. A4. Richard, B., Martinelli, P., Chaudat, T., Voldoire, F., Abouri, S., Bonfils, N. SMART 2008: overview, synthesis and lessons learnt from the International Benchmark (2016) Engineering Structures 106, pp. 166-178. A5. Richard, B., Martinelli, P., Voldoire, F., Corus, M., Chaudat, T., Abouri, S., Bonfils, N. SMART 2008: shaking table tests on an asymmetrical reinforced concrete structure and seismic margins assessment (2015) Engineering Structures 105, pp. 48-61. 4
A6. Colombo, M., Martinelli, P., Zedda, R., Albertelli, A., Marino, N. Dynamic response and energy absorption of mineral-phenolic foam subjected to shock loading (2015) Materials and Design, 78, pp. 63-73. A7. Andreotti, R., Colombo, M., Guardone, A., Martinelli, P., Riganti, G., Di Prisco, M. Performance of a shock tube facility for impact response of structures (2015) International Journal of Non-Linear Mechanics, 72, pp. 53-66. A8. Colombo, M., Martinelli, P., di Prisco, M. A design approach for tunnels exposed to blast and fire (2015) Structural Concrete, 16 (2) pp. 262-272. A9. Colombo, M., Martinelli, P., di Prisco, M. Validation of a computational approach to predict bursting pressure of scored steel plates (2014) Experimental Mechanics, 54 (9), pp. 1555-1573. A10. Colombo, M., Martinelli, P., Di Prisco, M. Layered high-performance concrete plates interacting with granular soil under blast loads: An experimental investigation (2013) European Journal of Environmental and Civil Engineering, 17 (10), pp. 1002-1025. A11. Martinelli, L., Martinelli, P., Mulas, M.G. Performance of fiber beamcolumn elements in the seismic analysis of a lightly reinforced shear wall (2013) Engineering Structures, 49, pp. 345-359. A12. Colombo, M., Martinelli, P. Pressure-impulse diagrams for RC and FRC circular plates under blast loads (2012) European Journal of Environmental and Civil Engineering, 16 (7), pp. 837-862. A13. Colombo, M., di Prisco, M., Martinelli, P. A new shock tube facility for tunnel safety (2011) Experimental Mechanics, 51 (7), pp. 1143-1154. A14. Martinelli, P., Mulas, M.G. An innovative passive control technique for industrial precast frames (2010) Engineering Structures, 32 (4), pp. 1123-1132. A15. Martinelli, P., Filippou, F.C. Simulation of the shaking table test of a seven-story shear wall building (2009) Earthquake Engineering and Structural Dynamics, 38 (5), pp. 587-607. Contributions on Books B1. Martinelli, P., Filippou, F.C., Mulas, M.G. Numerical Simulation of Shaking Table Tests on Reinforced Concrete Shear Walls (2007) Studies and Research, Vol. 27, 61-95. National Journals C1. di Prisco, M., Beltrami, C., Bonalumi, P., Cadoni, E., Caverzan, A., Colombo, M., Ferrara, L., Martinelli, P. L uso di materiali innovativi per la costruzione di tunnel resistenti alle azioni eccezionali (2013) Ingenio - Sistema integrato di informazione per l ingegnere. Contributions in Proceedings of International Conferences 5
D1. Colombo, M., Martinelli, P., Zedda, R., Albertelli, A., Marino, N. Mineral- Phenolic Foam for Blast Mitigation (2015) 5th International Workshop on Performance, Protection, and Strengthening of Structures under Extreme Loading (PROTECT), Edited by Kodur, VKR; Banthia, N; pp. 571-578. D2. Colombo, M., Martinelli, P., di Prisco, M. Blast and Fire Design of Precast Layered FRC Tunnel Segments (2015) 5th International Workshop on Performance, Protection, and Strengthening of Structures under Extreme Loading (PROTECT), Edited by Kodur, VKR; Banthia, N; pp. 722-729. D3. di Prisco, M., Martinelli, P. A numerical approach for the evaluation of the structural redistribution coefficient KRd (2014) Computational Modelling of Concrete Structures - Proceedings of EURO-C 2014, 1, pp. 503-512. D4. Colombo, M., Martinelli, P., Huaping, R. Pressure-impulse diagrams for SFRC underground tunnels (2014) Computational Modelling of Concrete Structures - Proceedings of EURO-C 2014, 2, pp. 1023-1030. D5. Sattar, S., Liel, A.B., Martinelli, P. Quantification of modeling uncertainties based on the blind prediction contest submissions (2013) Structures Congress 2013: Bridging Your Passion with Your Profession - Proceedings of the 2013 Structures Congress, pp. 1997-2008. D6. di Prisco, M., Beltrami, C., Bonalumi, P., Cadoni, E., Caverzan, A., Colombo, M., Ferrara, L., Martinelli, P. HPFRC Tunnel Segments to mitigate the risk of exceptional loads (2013) Fib symphosium, Tel-Aviv, Israel, pp. 695-698. D7. di Prisco, M., Cadoni, E., Colombo, M., Bonalumi, P., Caverzan, A., Martinelli, P. On the Mitigation of the Risk of Prefabricated Tunnel Linings: the ACCIDENT Project (2013) In Performance, Protection and Strengthening of Structures Under Extreme Loadings Protect 2013 Proceedings, Mysore, India pp. 61-70. D8. Martinelli, P., Martinelli, L., Mulas, M.G. Modeling and analysis of the CAMUS i RC shear wall (2012) ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, pp. 4497-4510. D9. Colombo, M., Martinelli, P. SDOF models for RC and FRC circular plates under blast loads (2011) Applied Mechanics and Materials, 82, pp. 440-445. D10. Coronelli, D., Martinelli, P. Assessment of a R/C structure subjected to high corrosion (2008) In SACoMaTiS 2008 International RILEM Conference, Varenna, Italy, 149-158. D11. Martinelli, P., Filippou, F.C. Numerical Simulation of the Shaking Table Test of a Seven Story RC Shear Wall Structure (2007) In ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, M. Papadrakakis, D.C. Charmpis, N.D. Lagaros, Y. Tsompanakis (Eds.), paper ID 1134 (on CD-Rom), Rethymno, Crete, Greece. 6
D12. Martinelli, P., Mulas, M.G. Fiber Element Modeling of the CAMUS I RC Shear Wall (2007) In SEMC 2007 The Third International Conference on Structural Engineering Mechanics and Computation, A. Zingoni (Ed.), Cape Town, South Africa, 1291-1296. D13. Martinelli, P., Mulas, M.G. Macro-Scale Modelling for the Seismic Analysis: a Case Study (2006) In Euro-C 2006, Computational Modelling of RC Structures, Mayrhofen, Austria, 747-756. D14. Coronelli, D., Martinelli, L., Martinelli P., Mulas, M.G. Micro-Meso- Macro Scale Modelling and Analysis of the CAMUS I RC Shear Wall (2006) In First European Conference on Earthquake Engineering and Seismology, paper ID 1478 (on CD-Rom), Geneva, Switzerland. D15. Martinelli, P., Filippou, F.C. Numerical Simulation of the Shaking Table Test of a Full Scale, Seven Story Shear Wall Specimen (2006) Analytical Model of Reinforced Concrete Walls, NEES/UCSD Workshop, San Diego, USA. Contributions in Proceedings of National Conferences E1. di Prisco, M., Martinelli, P. Sulla determinazione del coefficiente di ridistribuzione strutturale KRd per strutture in calcestruzzo fibrorinforzato (2014) Giornate aicap 2014, Bergamo. E2. di Prisco, M., Beltrami, C., Bonalumi, P., Cadoni, E., Caverzan, A., Colombo, M., Ferrara, L., Martinelli, P. Materiali cementizi ad alte prestazioni per mitigare il rischio di azioni eccezionali nei tunnel (2014) Giornate aicap 2014, Bergamo. E3. Colombo, M., Martinelli, P., di Prisco, M. Resistenza allo scoppio di conci di tunnel ad alte prestazioni (2014) 20 Congresso CTE, Milano. E4. Colombo, M., di Prisco, M., Martinelli, P. Una nuova apparecchiatura sperimentale per la sicurezza dei tunnel interrati (2010) In 18 Congresso CTE (Collegio dei Tecnici della Industrializzazione Edilizia), Brescia, Italy. E5. Martinelli, P., Mulas, M.G. An innovative passive control technique for industrial precast buildings (2009) In ANIDIS 2009 XIII Convegno Nazionale, L Ingegneria Sismica in Italia, paper ID 261 (on CD-Rom), Bologna, Italy. E6. Martinelli, P., Mulas, M.G. L effetto della Modellazione nella Predizione della Risposta Sismica della Parete a Taglio CAMUS I (2007) In ANIDIS 2007 XII Convegno Nazionale, L Ingegneria Sismica in Italia, paper ID 371 (on CD-Rom), Pisa, Italy. Technical Report F1. Martinelli, P. Predictive Benchmark SMART 2008 - CEA Results - Phase 1B. (2009) Rapport DM2S/SEMT/EMSI/RT/09-009/A, 113 pp. F2. Martinelli, P., Mulas, M.G. Review of the Current Knowledge on the Seismic Behaviour of Composite Floors with Reinforced Concrete preslabs (2008) Rapport DM2S/SEMT/EMSI/RT/08-024/A, 67 pp. 7
Contributions Under Review in International Journals G1. Colombo, M., Martinelli, P., di Prisco, M. A yield line approach for the evaluation of the structural redistribution factor (2016) Materials and Structures. 8