M ake sure that you have all the parts as listed on the packing slip. Verify that all blocking has been installed in the locations required. R eview the layout draw ings and distribute the m aterial. The layout draw ings w ill be required to determ ine the location of each pilaster, panel and door as w ell as the size of each stall. You w ill also need these to layout the drilling locations.
Spread legs of bracket slightly to reduce risk of scratching the panels and pilasters.
See the next sheet for connection details.
Make sure that the top of the flange of the bushing is on top.
Shanahan's Manufacturing Limited Metal Toilet Partition HARDWARE KITS May, 2002 79010 Concealed Door Hardware Kit 1 pc. TS-110 Concealed Latch Assembly 1 pc TS-120 Combination Hook/Bumper 1 pc. TS-130 Strike and Keeper 1 pc. TS-140-A Door Insert Bottom 1 pc. TS-140-B Hinge Bracket Top 1 pc. TS-140-D Female Cam - Square 1 pc. TS-150-A Door Insert - Top 1 pc. TS-150-B Hinge Bracket - Bottom 1 pc. TS-150-C Hinge Pin - Threaded 3 pcs. #8 x 3/4 Robertson Tek Screw Use for: TS-120 (2), TS-150-A (1) 1 pc. #10 x 2 Robertson Pan Head Screw Use for: TS-140-A 12 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-130 (4), TS-140-B (4), TS-150-B (4) 79015 Concealed Door Hardware Kit - Handicap 1 pc. TS-110-1 Concealed Lever Latch Assembly 1 pc TS-120 Combination Hook/Bumper 1 pc. TS-130 Strike and Keeper 1 pc. TS-140-A Door Insert Bottom 1 pc. TS-140-B Hinge Bracket Top 1 pc. TS-140-D Female Cam - Square 1 pc. TS-150-A Door Insert - Top 1 pc. TS-150-B Hinge Bracket - Bottom 1 pc. TS-150-C Hinge Pin - Threaded 3 pcs. #8 x 3/4 Robertson Tek Screw Use for: TS-120 (2), TS-150-A (1) 1 pc. #10 x 2 Robertson Pan Head Screw Use for: TS-140-A 12 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-130 (4), TS-140-B (4), TS-150-B (4) 79050 Surface Door Hardware Kit - Inswing 1 pc TS-120 Combination Hook/Bumper 1 pc. TS-140-A Door Insert Bottom 1 pc. TS-140-B Hinge Bracket Top 1 pc. TS-140-D Female Cam - Square 1 pc. TS-150-A Door Insert - Top 1 pc. TS-150-B Hinge Bracket - Bottom 1 pc. TS-150-C Hinge Pin - Threaded 1 pc. TS-300 Surface Latch 1 pc. TS-400 Surface Strike and Keeper 3 pcs. #8 x 3/4 Robertson Tek Screw Use for: TS-120 (2), TS-150-A (1) 1 pc. #10 x 2 Robertson Pan Head Screw Use for: TS-140-A 12 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-140-B (4), TS-150-B (4), TS-400 (4) 2 pcs. #8 x 1 Robertson Flat Head Screw Use for: TS-300 79055 Surface Door Hardware Kit - Outswing 1 pc TS-120 Combination Hook/Bumper 1 pc. TS-130 Strike and Keeper 1 pc. TS-140-A Door Insert Bottom 1 pc. TS-140-B Hinge Bracket Top 1 pc. TS-140-D Female Cam - Square 1 pc. TS-150-A Door Insert - Top 1 pc. TS-150-B Hinge Bracket - Bottom 1 pc. TS-150-C Hinge Pin - Threaded 1 pc. TS-300 Surface Latch 3 pcs. #8 x 3/4 Robertson Tek Screw Use for: TS-120 (2), TS-150-A (1) 1 pc. #10 x 2 Robertson Pan Head Screw Use for: TS-140-A 12 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-130 (4), TS-140-B (4), TS-150-B (4) 2 pcs. #8 x 1 Robertson Flat Head Screw Use for: TS-300 79100 Panel Kit 2 pcs. TS-100 Wall F Bracket 2 pcs. TS-200 Panel to Pilaster U Bracket 6 pcs. Plastic Wall Anchor - #10-12 Use for: TS-100 (4), Floor Channel to Floor (2) 4 pcs. #12 x 3/4 Robertson Tek Screw Use for: Pilaster to Floor Channel 18 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-100 (4), TS-200 (12), Headrail to Pilaster (2) 2 pcs. #12 x 1 1/2 Robertson Pan Head Screw Use for: Floor Channel to Floor 4 pcs. #12 x 2 Robertson Pan Head Screw Use for: TS-100 79200 Wall Front Kit 2 pcs. TS-100 Wall F Bracket 6 pcs. Plastic Wall Anchor - #10-12 Use for: TS-100 (4), Floor Channel to Floor (2) 4 pcs. #12 x 3/4 Robertson Tek Screw Use for: Pilaster to Floor Channel 6 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-100 (4), Headrail to Pilaster (2) 2 pcs. #12 x 1 1/2 Robertson Pan Head Screw Use for: Floor Channel to Floor 4 pcs. #12 x 2 Robertson Pan Head Screw Use for: TS-100 1 HARDWARE KITS May 2002 3/18/11
79300 Alcove Kit 4 pcs. TS-100 Wall F Bracket 2 pcs. TS-140-1 Alcove L Bracket 2 pcs. TS-170 Headrail Bracket 16 pcs. Plastic Wall Anchor - #10-12 Use for: TS-100 (8), TS-170 (4), Floor Channel to Floor (4) 8 pcs. #12 x 3/4 Robertson Tek Screw Use for: Pilaster to Floor Channel 20 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-100 (8), TS-140 (4), TS-170 (4), Headrail to Pilaster (4) 4 pcs. #12 x 1 1/2 Robertson Pan Head Screw Use for: Floor Channel to Floor 12 pcs. #12 x 2 Robertson Pan Head Screw Use for: TS-100 (8), TS-170 (4) 79400 Post Kit 120 2 pcs. TS-100 Wall F Bracket 2 pcs. TS-169 Post Flange c/w Set Screw 2 pcs. TS-200 Panel to Post U Bracket 8 pcs. Plastic Wall Anchor - #10-12 Use for: TS-100 (4), TS-169 to Floor (2), TS-169 to Ceiling (2) 16 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-100 (4), TS-200 (12) 2 pcs. #12 x 1 1/2 Robertson Pan Head Screw Use for: TS-169 to Floor 6 pcs. #12 x 2 Robertson Pan Head Screw Use for: TS-100 (4), TS-169 to Ceiling (2) 79410 Post Kit 70 2 pcs. TS-100 Wall F Bracket 1 pcs. TS-169 Post Flange c/w Set Screw 1 pc. TS-190 Post Cap 2 pcs. TS-200 Panel to Post U Bracket 6 pcs. Plastic Wall Anchor - #10-12 Use for: TS-100 (4), TS-169 to Floor (2) 16 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-100 (4), TS-200 (12) 2 pcs. #12 x 1 1/2 Robertson Pan Head Screw Use for: TS-169 to Floor 4 pcs. #12 x 2 Robertson Pan Head Screw Use for: TS-100 (4) 79420 Wall-Hung Screen Kit 2 pcs. TS-100 Wall F Bracket 1 pc. Urinal Screen Bracket 6 pcs. Plastic Wall Anchor - #10-12 Use for: TS-100 (4), Urinal Screen Bracket (2) 8 pcs. #12 x 3/4 Robertson Tek Screw Use for: TS-100 (4), Urinal Screen Bracket (4) 6 pcs. #12 x 2 Robertson Pan Head Screw Use for: TS-100 (4), Urinal Screen Bracket (2) 2 HARDWARE KITS May 2002 3/18/11
Installation Check List / Toilet Stalls Date: Project: Pilasters are mounted securely at base and that no twisting occurs. Stainless steel boots are securely attached. Pilasters are plumb. Pilasters are spaced properly for consistent gap between doors and pilasters. Doors are mounted at proper and equal heights. Door hinges are lubricated and cams are properly set for door position. Coat hook and bumper is properly installed. Concealed latch is functional and lines up with strike and keeper. Panels are square to walls and pilasters. Panels are mounted at proper height. Head rail is properly fastened at wall brackets and to pilasters. When continuous length cannot be used, head rail is spliced cleanly and only over pilasters. Screws into metal are all present and tight. Screws into walls are into proper backing or anchors. No scratches, dents or other blemishes are present on painted material. No excessive gaps exist between panels, pilasters and/or walls. Urinal screen top post cap siliconed in and bottom set screw tight. Installer: Comments: