Plant design and economics (8)

Transcription

1 Plant design and economics (8) Zahra Maghsoud ٢ DEPRECIATION (Ch. 9 Peters and Timmerhaus ) The reduction in value due to physical deterioration, technological advances, economic changes, or other factors is a measure of the depreciation. For example, suppose a piece of equipment had been put into use 10 years ago at a total cost of $31,000. The equipment is now worn out and is worth only $1000 as scrap material. The decrease in value during the 10-year period is $30,000. ١

2 ٣ TYPES OF DEPRECIATION The causes of depreciation may be physical or functional. Physical depreciation is the term given to the measure of the decrease in value due to changes in the physical aspects of the property. Wear and tear, corrosion, accidents, and deterioration due to age or the elements are all causes of physical depreciation. With this type of depreciation, the serviceability of the property is reduced because of physical changes. ۴ TYPES OF DEPRECIATION Depreciation due to all other causes is known as functional depreciation. One common type of functional depreciation is obsolescence. This is caused by technological advances or developments which make an existing property obsolete. Even though the property has suffered no physical change, its economic serviceability is reduced. ٢

3 ۵ SERVICE LIFE The period during which the use of a property is economically feasible is known as the service life or economic or useful life of the property. Salvage value is the net amount of money obtainable from the sale of used property over and above any charges involved in removal and sale. If the property cannot be disposed of as a useful unit, it can often be dismantled and sold as junk. The value is known as the scrap or junk value. ۶ Table 1 presents estimated service lives for equipment based on the four group guidelines as recommended by the Internal Revenue Service. ٣

4 ٧ PRESENT VALUE The present value of an asset may be defined as the value of the asset in its condition at the time of valuation: Book Value Market Value Replacement Value May be different Book Value, or Unamortized Cost The difference between the original cost of a property, and all the depreciation charges made to date is defined as the book value (sometimes called unamortized cost). It represents the worth of the property as shown on the owner s accounting records. ٨ PRESENT VALUE Market Value The price which could be obtained for an asset if it were placed on sale in the open market is designated as the market value. The use of this term conveys the idea that the asset is in good condition and that a buyer is readily available. Replacement Value The cost necessary to replace an existing property at any given time with one at least equally capable of rendering the same service is known as the replacement value. ۴

5 ٩ METHODS FOR DETERMINING DEPRECIATION In general, depreciation accounting methods may be divided into two classes: (1) arbitrary methods giving no consideration to interest costs Straight-line declining-balance sum-of-the-years-digits (2) methods taking into account interest on the investment. sinking-fund present-worth ١٠ 1-1 Straight-Line Method It is assumed that the value of the property decreases linearly with time. d = annual depreciation, $/year V = original value of the property at start of the service-life period, completely installed and ready for use, dollars Vs = salvage value of property at end of service life, dollars n = service life, years ۵

6 ١١ 1-1 Straight-Line Method The asset value (or book value) of the equipment at any time during the service life: V a = asset or book value, dollars a = the number of years in actual use Because of its simplicity, the straight-line method is widely used for determining depreciation costs. ١٢ multiple straight-line method Because it is impossible to estimate exact service lives and salvage values, it is sometimes desirable to reestimate these factors from time to time during the life period of the property. If this is done, straight-line depreciation can be assumed during each of the periods, and the overall method is known as multiple straight-line depreciation. ۶

7 ١٣ Comparison of straightline, multiple straight-line, sum-of-the-years-digits, and declining-balance methods for determining depreciation. Fig 9-1 ١۴ straight-line method The straight-line method may be applied on the basis of units of production or predicted amount of service output, instead of life years. For example, if it is estimated that a machine will produce 10,000 units before its useful life ends and that 1000 units are produced each year, the percentage to calculate depreciation is 10% of the machine cost less salvage value, if permitted. This percentage is applied to the cost of the asset as yearly depreciation. It should also be considered for properties having useful lives that are more dependent on the number of operations performed than on calendar time. ٧

8 ١۵ 1-2 Declining-Balance (or Fixed Percentage) Method The fixed-percentage (or declining-balance) factor remains constant throughout the entire service life of the property, while the annual cost for depreciation is different each year. The depreciation cost for the first year of the property s life is V*f, where f represents the fixed-percentage factor. At the end of the first year ١۶ 1-2 Declining-Balance Method At the end of the second year At the end of a years At the end of n years (i.e., at the end of service life) Therefore, Matheson formula ٨

9 ١٧ 1-2 Declining-Balance Method The increased depreciation costs in the early years are very attractive to concerns just starting in business, because the income-tax load is reduced at the time when it is most necessary to keep all pay-out costs at a minimum. Fig 9-1 ١٨ 1-2 Double declining-balance Method The textbook relationship presented in Eq. (7) (text book method) is not applicable if the salvage value is zero. The value of the fixed-percentage factor is often chosen arbitrarily using a sound economic basis. one arbitrary method for choosing the value of f is to fix it at two times the reciprocal of the service life n. The salvage value is considered to be zero, and the fixed-percentage factor is based on the straight-line rate of depreciation during the first year. This method is known as double declining-balance method. ٩

10 ١٩ 1-2 Double declining-balance Method In double declining balance method, the value of the asset cannot decrease to zero at the end of the service life. To handle this difficulty, it is sometimes desirable to switch from the declining-balance to the straight-line method after a portion of the service life has expired. This is known as the combination method. It permits the property to be fully depreciated during the service life, yet also gives the advantage of faster early-life write-offs. ٢٠ Types of declining-balance methods for determining depreciation. ١٠

11 ٢١ Determination of depreciation by straight-line and decliningbalance methods. Example 1. The original value of a piece of equipment is $22,000, completely installed and ready for use. Its salvage value is estimated to be $2000 at the end of a service life estimated to be 10 years. Determine the asset (or book) value of the equipment at the end of 5 years using: (a) Straight-line method. (b) Textbook declining-balance method. (c) Double declining-balance (200 percent) method (i.e., the declining-balance method using a fixed-percentage factor giving a depreciation rate equivalent to twice the minimum rate with the straight-line method). ٢٢ 1-3 Sum-of-the-Years-Digits Method The yearly depreciation factor is the number of useful servicelife years remaining divided by the sum of the arithmetic series. This factor times the total depreciable value at the start of the service life gives the annual depreciation cost. As an example, consider the case of a piece of equipment costing $20,000 when new. The service life is estimated to be 5 years and the scrap value $2000. The sum of the arithmetic series of numbers from 1 to n is = 15. The total depreciable value at the start of the service life is $20, $=18000$ ١١

12 ٢٣ 1-3 Sum-of-the-Years-Digits Method Therefore, the depreciation cost for the first year is: and the asset value at the end of the first year is $14,000. The depreciation cost for the second year is Similarly, the depreciation costs for the third, fourth, and fifth years, respectively, would be $3600, $2400, and $12OO. ٢۴ 1-3 Sum-of-the-Years-Digits Method Fig 9-1 ١٢

13 ٢۵ 1-3 Sum-of-the-Years-Digits Method Equations which apply for determining annual depreciation by the sum-of-the-years-digits method are: ٢۶ METHODS FOR DETERMINING DEPRECIATION In general, depreciation accounting methods may be divided into two classes: (1) arbitrary methods giving no consideration to interest costs Straight-line declining-balance sum-of-the-years-digits (2) methods taking into account interest on the investment. sinking-fund present-worth ١٣

14 ٢٧ 2-1 Sinking-Fund Method The use of compound interest is involved in the sinking-find method. An ordinary annuity plan is set up wherein a constant amount of money should theoretically be set aside each year. At the end of the service life, the sum of all the deposits plus accrued interest must equal the total amount of depreciation. ٢٨ 2-1 Sinking-Fund Method i =annual interest rate R = uniform annual payments made at end of each year (this is the annual depreciation cost), dollars V - Vs = total amount of the annuity accumulated in an estimated service life of n years (original value of property minus salvage value at end of service life), dollars ١۴

15 ٢٩ 2-1 Sinking-Fund Method Asset (or book) value after a years = Va: ٣٠ 2-1 Sinking-Fund Method Since the value of R represents the annual depreciation cost, the yearly cost for depreciation is constant when the sinking-fund method is used. Because of the effects of interest, the annual decrease in asset value of the property is less in the early-life years than in the later years. ١۵

16 ٣١ 2-1 Sinking-Fund Method Although the sinking-fund viewpoint assumes the existence of a fund into which regular deposits are made, an actual fund is seldom maintained. Instead, the money accumulated from the depreciation charges is put to work in other interests, and the existence of the hypothetical fund merely serves as a basis for this method of depreciation accounting. ١۶