TENDER DOCUMENT V2. Under instructions from Mr. Trevor Pogrokse and Mrs Gayle Dickerson of. In the Matter of

Transcription

1 TENDER DOCUMENT V2 Under instructions from Mr. Trevor Pogrokse and Mrs Gayle Dickerson of In the Matter of Success Aluminium Pty Ltd (In Liquidation) Project Manager Lee Pulbrook t m e. Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 1

2 TENDER SALE Tenders are invited for the purchase of Exclusive, Non Exclusive & Rolled Aluminium Extrusion TIGER ASSET GROUP has been appointed by Trevor Pogrokse and Gayle Dickerson of Grant Thornton in the Matter of Success Aluminium Pty Ltd (In Liquidation) Please note the following important information. 1. TENDER DEADLINE All tenders must be received by not later than Wednesday 30 th September 2015, 4pm (AEST). 2. TENDER SUBMISSION To submit a complying tender you are required to send the following: (a) A completed Tender Application, including the Offer Schedule (Annexure 1), executed by the tenderer where indicated. (b) A deposit equal to 10% of the offer price (see 4. DEPOSIT overleaf). You are required to the completed Tender documents to TIGER ASSET GROUP at the following address: TIGER ASSET GROUP Attention: Lee Pulbrook Level 3, 50 Carrington Street Sydney NSW 2000 t m e. lee@tigerassetgroup.com Tenders must be lodged by and the tender application correctly completed and signed with deposits paid. 3. OFFERS Details of the assets are included in the Asset Listing on P11. Complete the Offer Schedule (Annexure 1) by stating the offer price. All transactions are in Australian dollars (AUD) and exclusive of GST. Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 2

3 TENDER SALE 4. DEPOSIT A deposit of 10% of the total offer is required for your Tender Application to be valid. Deposits can be made EITHER by: (a) Unendorsed bank cheque in favour of "Tiger Asset Group Pty Limited Trust Account" sent with your Tender application, OR, (b) Direct Electronic Transfer of funds into "Tiger Asset Group Pty Limited Trust Account" Account Name: Tiger Asset Group Pty Limited Trust Account Bank: National Australia Bank BSB: Account No: BUYER'S PREMIUM A Buyer's Premium of 7.5% (exclusive of GST) must be added to your offer price. 6. TERMS AND CONDITIONS A full list of Terms and Conditions are contained in Annexure ASSET LOCATION The stock is located at: 56 Depot Street, Banyo QLD INSPECTIONS **9am to 4pm Tuesday 29 th September 2015 Only** 9. COLLECTION OF ITEMS The assets can be collected by appointment between 2 nd and 9 th October am to 4pm Unless advised to the contrary, all items purchased must be removed by the above date or a storage fee of $1000 per day per lot will apply. 10. QUESTIONS Please contact the Project Manager if you have any queries regarding the completion of this Tender Application. Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 3

4 TENDER SALE TENDER PROCESS Equipment Offered for Sale Site Inspections Tenders Close Wednesday 30 th September 4pm (AEST) 10% Deposit to be Included Tender Review Successful Unsuccessful Successful Tenders Notified Unsuccessful Bidders Notified Account to be paid in full Thursday 1 st October 2015 Deposit Returned Equipment to be removed by 9 th October 2015 Tender Closes: WEDNESDAY 30 TH SEPTEMBER PM (AEST) Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 4

5 TENDER SALE TABLE OF CONTENTS TENDER APPLICATION... 6 DETAILS OF TENDERER... 7 ANNEXURE 1 - Offer Schedule... 8 ANNEXURE 2 - Tender Terms & Conditions... 9 ANNEXURE 3 Asset Listing Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 5

6 TENDER SALE TENDER APPLICATION 1. The party whose details appear in the attached Schedule hereby submits its offer to purchase the Plant and Equipment indicated by the Tenderer in Annexure 1 of this Tender Application. 2. A bank cheque or evidence of an electronic direct transfer to Tiger Asset Group is enclosed for the amount of AUD$, representing the required deposit of 10% of the Offer Price including buyer s premium and GST for each Parcel and/or Lot. 3. The Tenderer acknowledges and agrees that: (a) The successful Tenderer must pay a Goods and Services Tax (GST) of 10% and a 7.5% Buyers Premium, i.e. successful bid price is $ % buyer s premium + 10% GST = Invoice Total $ (b) This Tender Application forms an irrevocable offer to purchase from the Vendor each Parcel and/or Lot as indicated by the Tenderer in the Offer Schedule (Annexure 1); (c) The Vendor may sell all or part of the Plant and Equipment at any time prior to the Closing Date and any Tenderer or proposed Tenderer will have no claim against the Vendor or its Agent by reason of the sale of all or part of the Plant and Equipment on or prior to the Closing Date; (d) The Vendor is under no obligation to accept any Tender. In the event of a Tender not being accepted, the Vendor reserves the right to negotiate with one or more of the Tenderers to the exclusion of other Tenderers. A Tender may only be withdrawn with the consent of the Vendor; and (e) It will abide by the Tender Conditions as outlined in Annexure If payment of the Deposit is made by way of bank cheque, the Tenderer authorises Tiger Asset Group to place that cheque in its trust account pending a decision on the Tender. DATED this day of EXECUTED BY THE TENDERER in accordance with its Constitution in the presence of: Signature of director/secretary Signature of director Name of director/secretary - please print Name of director - please print Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 6

7 TENDER SALE DETAILS OF TENDERER ITEM INFORMATION DETAILS 1 Tenderer 2 Tender s Return Banking Details Account Name: Account Number: BSB: 3 Tenderer's address and contact name Contact name: Contact Position: Address: Postcode: Phone: Fax: 4 Tenderer s ABN Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 7

8 TENDER SALE ANNEXURE 1 Offer Schedule Lot Number Description Offer Price (Exclusive of GST) Buyers Premium 7.5% (Exclusive of GST) GST 10% Total Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 8

9 TENDER SALE ANNEXURE 2 Tender Terms & Conditions 1. The Purchaser acknowledges that he has made an inspection of the Plant and Equipment and has satisfied himself as to condition. No warranty, guarantee or representation is offered by the Vendor or its agent as to the condition of the Plant and Equipment or to any matter that may affect future usage. All Plant and Equipment is offered on an "as is, where is" basis. While every effort has been made to ensure the accuracy of the descriptions, the Vendor and its agent cannot warrant they are correct. 2. No lot shall be sold or deemed to be sold by brochure descriptions and/or Tender document description or by any other description. 3. The successful Purchaser will be advised within two working days of the Vendor's acceptance of their offer and acknowledges that the deposit submitted with their offer will be held by the Vendor's agent as stake holder pending completion. If this offer is unsuccessful the deposit will be returned within seven working days of the Tender closure. 4. The successful Purchasers will be required to make settlement of the balance of the agreed purchase price by Bank Cheque or Bank Transfer within 48 hours of acceptance, at which time all risk in the Plant and Equipment shall pass to the Purchasers. Until the full payment has been received and cleared, all title and property in the Plant and Equipment will not pass to the Purchasers. 5. The Vendor warrants that at the time title is to pass in the goods, they will be free of any financial encumbrance. 6. The Vendor reserves the right to withdraw a lot without notice prior to the close of Tender. 7. If the successful Purchaser fails to comply with these terms and conditions, the Vendor shall retain the deposit and/or any other monies paid and the right to resell the Plant and Equipment in any manner and upon such terms and conditions that they may think fit. 8. All losses and expenses incurred by the Vendor and their Agent resulting from any resale pursuant to Clause 7 hereof and all damages which the Vendor and its agent may sustain hereby shall be recoverable from the successful Purchasers as liquidated damages and the Vendor and the Agent shall not be obliged to give notice of such resale. 9. The contract for sale is subject to the Laws of New South Wales, Australia. 10. The highest or any bid will not necessarily be accepted. 11. It remains at all times the responsibility of the original Purchaser to remove the equipment purchased under the Terms & Conditions of this Tender. 12. The Purchasers shall make their own arrangements for the collection of the Plant and Equipment from its present location by 9 th October 2015 unless advised to the contrary by the Vendor or its Agent in writing. It is a condition of this Tender that the Tenderer must use all care and skill to remove the plant and equipment without causing any damage to the surrounding buildings, structures and equipment. Further, unless an agreement as to the extension of the removal period has been reached with the Vendor, items not removed in the stipulated time period shall be deemed to be abandoned and or storage fees as per the tender document of page 3 section 9 (collection of items) of $1000 per day per lot may apply. 13. Plant & Equipment can only be removed between the hours of 8am and 4pm on weekdays, unless otherwise arranged with the Vendor. 14. Persons entering the premises may do so at their own risk. Purchasers dismantling equipment are required to have adequate Public Liability and Workers Compensation Insurance Cover as the Vendor or their Agent will not accept any liability whatsoever for any personal injury or damage caused during dismantling or removal of plant and equipment. 15. Purchasers entering sites will be required to conform to workplace health and safety and environmental regulations. Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 9

10 TENDER SALE 16. The Purchaser hereby indemnifies the Vendor and their Agents from all claims or proceedings which may be brought against the Vendor or their Agents which in any way arise out of or are connected with the collection of the Plant and Equipment from the premises including without limitation, any claims by the owners of the properties in connection with any damage suffered or caused to the premises. 17. All warranties, conditions, liabilities or representations in relation to the quality or fitness of the Plant and Equipment (other than any being or giving rise to non excludable rights under any laws of Australia or its constituent states which might, but for this Clause, be implied by law or otherwise) are hereby expressly negatived and excluded. 18. The Purchaser acknowledges that he has received all of the Plant and Equipment upon the Purchaser taking delivery of the Plant and Equipment from the Vendor. 19. A Goods and Services Tax (GST) of 10% is payable (exclusive of the Offer Price) and in addition a buyer's fee of 7.5% (GST exclusive) will be added to the offer price and retained by the Agent. If the Plant and Equipment purchased by the Tenderer is to be exported from Australia, the Tenderer is required to pay the amount of GST as specified in the Offer Schedule before any removal or dismantle of the Plant and Equipment is to take place. The Tenderer is required to notify Tiger Asset Group in writing at the time of submitting the tender of the intention to export the Plant and Equipment. If the Tenderer complies with the required conditions and provides Tiger Asset Group with a Bill of Lading proving the export from the country of the Plant and Equipment purchased within Sixty (60) days of the invoice date then Tiger Asset Group will refund the GST paid to the Tenderer in full. 20. Whilst every effort has been made to provide accurate advice regarding the application and effects of the GST, the Vendor and its Agent cannot warrant this advice is correct. The Purchaser acknowledges that he has received independent advice regarding the GST and its effects. 21. Removal Conditions (a) The Purchaser shall not cause damage or injury to or permit damage or injury to be caused to any plant and equipment, machinery, structures, fixtures and fittings or any other property of the Vendor, Tiger Asset Group or any other person on or near the site. (b) The Purchaser shall ensure that the site is kept clean and in a tidy condition and shall remove all rubbish it, its employees, agents and contractors accumulate during the course of their activities on site on behalf of the Purchaser. If the Purchaser fails to comply with obligations imposed on it by this clause then after giving notice of intention in writing the Vendor may arrange for any cleaning required to be carried out at the Purchaser's expense and the cost will become a debt owed by the Purchaser to the Vendor. (c) Any damage, breakage or defect caused by the Purchaser, its employees, agents or contractors for lack of care or misuse or abuse on the part of same or otherwise brought about by any breach or default of the Purchaser under the conditions of sale shall be made good by the Purchaser at its expense. (d) The Purchaser shall remove the lot(s) purchased in such a way as to ensure no inconvenience is caused to the Vendor, auctioneer or their agents and that all roads and site access are kept free of blockage and obstruction at all times. (e) All plant, tools and equipment used by the Purchaser, its employees or contractors on or around the sites shall be selected and maintained in a fully serviced and safe condition. (f) The Vendor may require the Purchaser to provide evidence prior to commencement of work for the removal of any lot that the Purchaser has arranged insurance cover in respect of any liability arising out of such work. (g) The Purchaser will be required to provide a Safe Work Method Statement for approval by Tiger Asset Group prior to commencement of asset removal. Tiger Asset Group Agents for the Vendor Level 3/50 Carrington St Sydney NSW TigerAssetGroup.com SYDNEY MELBOURNE BRISBANE ADELAIDE PERTH LOS ANGELES BOSTON NEW YORK 10

11 Annexure 3 Asset Listing Lot No Qty Description 1 1 Rolled Aluminium Sheet 1200 x 2400mm x 6mm 7x Packs Rolled Aluminium Sheet x 2400mm x 8mm 1x Pack Approx 1484 Kg 2x Pack 2.5mm Approx 2976 Kg Rolled Aluminium Sheet 1200 x 2400mm x 1.6mm 3 1 1x Pack Approx 1341 Kg 1x Pack 2mm Approx 1414 Kg 3x Pack 4mm Approx 4139 Kg Rolled Aluminium Sheet x 2400mm x 2.5mm 4x Packs Rolled Aluminium Sheet 1200 x 2400mm x 3mm 5 1 2x Packs Approx 2889 Kg 1x Pack 1.2mm Approx 723 Kg 3x Pack 2.5mm Approx 3818 Kg Rolled Aluminium Sheet x 2400mm x 1.6mm 4x Packs Rolled Aluminium Sheet x 2400mm x 3mm 2x Packs Approx 2676 Kg total 3x Packs 5mm Approx 4014 Kg total Rolled Aluminium Sheet x 2400mm x 3mm 3x Packs Rolled Aluminium Sheet x 2400mm 2x Packs 3mm Approx 2575 Kg Net Weight total 2x Packs 2mm Approx 3118 Kg Net Weight total Rolled Aluminium Sheet 1200 x 2400mm x Packs 1.2mm Approx 2403 Kg Net Weight total 1x Pack 1.6mm Approx 1407 Kg Net Weight total 2x Packs 3mm Approx 2918 Kg total Net Weight total Rolled Aluminium Sheet x 2400mm 3x Packs 5mm Approx 4311 Kg Net Weight total 2x Pack 6mm Approx 2592 Kg Net Weight total 12 1 Aluminium Rolled Sheet Coils 4x Coils Approx 1200mm (W) x 116m Long (Bay S1) Aluminium Extrusion Including Channels, 13 1 Angles, Rope Rial, Square tube and Coving. Approx 31 Packs 14 1 (Bay A1) Net Aluminium Extrusion including Rectangular & Square tube. Approx 23 packs 15 1 (Bay A2) Aluminium Extrusion including Rectangular & Square tube. Approx 17 packs 16 1 (Bay A3) Aluminium Extrusion including Rectangular & Square tube. Approx 28 packs 17 1 (Bay A4) Aluminium Extrusion including Rectangular & Square tube. Approx 23 packs Approx Net Weight kg Page 1

12 Annexure 3 Asset Listing (Bay S2) Aluminium Extrusion including Round table in various size and guages. Approx 41 packs (Bay B1) Aluminium Extrusion including Various size Flat Bar. Approx 23 packs (Bay B2) Aluminium Extrusion including Security door frame profiles in assorted colours. Approx 25 packs (Bay B3) Aluminium Extrusion including Security door frame profiles. Approx 8 packs (Bay B4) Aluminium Extrusion including Security window frame profiles. Approx 24 packs (Bay B5) Aluminium Extrusion including Window fly frame profiles, Angle, Gate tracks, etc. Approx 14 packs (Bay B6) Aluminium Extrusion including Chanel, Rope track, Bug strip etc. Approx 26 packs (Bay B7) Aluminium Extrusion including Box tube, Security door frame. Approx 14 packs (Bay S3) Aluminium Extrusion for Marine use Including Gunwale, Tophat, Blue fin chime etc Approx 17 packs (Bay C1) Aluminium Extrusion including Angle in assorted sizes. Approx 17 packs (Bay C2) Aluminium Extrusion including Corner sections, Door frames etc. Approx 17 packs (Bay D3) Aluminium Extrusion including 7189 Channel, Cove, Tube, Door head etc. Approx 29 packs 31 1 (Bay D4) Aluminium Extrusion including Channel, Angle, Door heads, Door frame etc Approx 25 packs 32 1 (Bay D5) Aluminium Extrusion including Channel, Cove, Angle etc. Approx 29 packs Rolled Aluminium Sheet 6100 x 1200mm x 4mm in 4 Packs 5045 (Does not include fork spreader) 34 1 Rolled Aluminium Sheet 6100 x 1200mm x 3mm in 2 Packs 2941 (Does not include fork spreader) 35 1 Rolled Aluminium Sheet 6100 x 1200mm x 2.5mm in 3 Packs 4261 (Does not include fork spreader) 36 1 Aluminium Extrusion to Wall Racks, Assorted Profiles 5.5m to 6.5m length 37 1 (Bay A5) Aluminium Extrusion including Angle, RHS in various sizes and gauges 2592 Approx 11 packs 38 Aluminium Extrusion including fly frame. Approx 4 packs Aluminium slat wall extrusion. Approx 6 packs (Bay S5) Aluminium Extrusion including Door track, Leg jambs, H-Reciever, Channel, 5.2 to 6.5m length Approx 11 skips 41 Aluminium Extrusion including fly frame, 5m Length Approx 13 skips 42 Aluminium Extrusion, All flat bar, 4m Length Approx 12 Skips Page 2

13 Annexure 3 Asset Listing Aluminium Extrusion, Angle profile, 6.5m Length Approx 46 skips Aluminium Extrusion, Square Hallow Sections, m Lengths, Approx 12 skips Aluminium Extrusion, Round tube, 6.5m Length Approx 8 skips Aluminium Extrusion, Assorted door frame profiles, 6.2m Lengths, Approx 11 skips Aluminium Extrusion, Assorted window frame profiles, 6m Lengths, Approx 36 skips Aluminium Extrusion, Assorted standard channels, m Lengths, Approx 10 skips Aluminium Extrusion, Miscellaneous profiles including Rope rail, Channels, Security products, 4.0 to 6.5 metre length. Approx 14 skips Exclusive Product (Conergy) Aluminium Extrusion, Conergy rail, Approx 27 packs. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. Exclusive Product (Alfit) Aluminium Extrusion, Door track & Sil. Approx 68 packs. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. Exclusive Product (Tomex) Aluminium Extrusion, Cavity brace. 1 pack. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. Exclusive Product (Miska) Aluminium Extrusion, 2x packs. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. Exclusive Product (Ezy Blinds) Aluminium Extrusion, 1x pack. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant Page 3

14 Annexure 3 Asset Listing Exclusive Product (Bris Aluminium) Aluminium Extrusion, 5x packs. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. Exclusive Product (Dewell) Aluminium Extrusion, 1x pack. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. Exclusive Product (Aussie Lifts) Aluminium Extrusion, 6x packs. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. (Bay A5) Exclusive Product (Rapid Aluminium) Aluminium Extrusion, 14x packs. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. (Bay A5) Exclusive Product (Factory Direct Fencing) Aluminium Extrusion, 56x packs. This lot must be scrapped. It is a condition precedent that the purchaser of this lot will be required to certified that they will comply with this condition prior to collection and subsequently provide evidence to the Agent that this lot has been disposed of through a reputable scrap merchant. Assorted Quantity of Security Corner Stakes, Aluminium & Plastic Fly Screen Joiners & Adapters. Approx 9 pallets Stillage Crates Approx x 450 x 380mm (H) and Approx x 450 x 380mm (H) Page 4

15 lot 1 lot 2 lot 3 lot 4 lot 5 lot 6 (1)

16 lot 7 (1) lot 8 (1) lot 9 (1) lot 10 (1) lot 11 (1) lot 12 (1)

17 lot 13 (1) lot 13 (3) lot 14 (1) lot 14 (3) lot 15 (1) lot 15 (3)

18 lot 16 (1) lot 16 (3) lot 17 (1) lot 17 (3) lot 18 (1) lot 18 (3)

19 lot 19 (1) lot 19 (3) lot 20 (1) lot 20 (3) lot 21 (1) lot 21 (3)

20 lot 22 (1) lot 23 (1) lot 23 (3) lot 24 (1) lot 24 (3) lot 25 (1)

21 lot 25 (3) lot 26 (1) lot 26 (3) lot 27 (1) lot 27 (3) lot 28 (1)

22 lot 28 (3) lot 30 (1) lot 30 (2) lot 31 (1) lot 31 (3) lot 32 (1)

23 lot 32 (3) lot 33 (1) lot 34 (1) lot 35 (1) lot 36 (1) lot 36 (3)

24 lot 37 (1) lot 37 (3) lot 38 (1) lot 38 (3) lot 39 (1) lot 39 (3)

25 lot 40 (1) lot 40 (3) lot 41 (1) lot 41 (3) lot 42 (1) lot 42 (3)

26 lot 43 (1) lot 43 (3) lot 44 (1) lot 44 (3) lot 45 (1) lot 45 (3)

27 lot 46 (1) lot 46 (3) lot 47 (1) lot 47 (3) lot 48 (1) lot 48 (3)

28 lot 49 (1) lot 49 (3) lot 80 (1) lot 80 (3) lot 81 (1) lot 81 (2)

29 lot 81 (4) lot 81 (5) lot 81 (6) lot 82 (1) lot 83 (1) lot 84 (1)

30 lot 85 (1) lot 85 (3) lot 86 (1) lot 87 (1) lot 87 (3) lot 88 (1)

31 lot 88 (3) lot 89 (1) lot 89 (3) lot 89 (4) lot 89 (5) lot 90 (1)

32 lot 90 (3) lot 91 (1) lot 91 (3)