Curriculum Vitae. Manish K. Dixit, PhD, LEED AP

Transcription

1 EDUCATION Curriculum Vitae Manish K. Dixit, PhD, LEED AP Assistant Professor, Department of Agricultural Sciences and Engineering Technology U.S. National Participant, Annex 57, International Energy Agency Sam Houston State University 216 A Farrington Building, Huntsville, TX manish.dixit@shsu.edu; Phone: (o), (c) December 2013 August 2009 March 1997 February 1995 Texas A&M University, College Station, TX Ph.D. in Architecture (Emphasis on Construction Management), Department of Architecture Texas A&M University, College Station, TX M.S. in Construction Management, Department of Construction Science School of Planning and Architecture, New Delhi, India Master of Landscape Architecture, Department of Landscape Architecture Madhav Institute of Technology and Science, Gwalior, India Bachelor of Architecture, Department of Architecture ACADEMIC APPOINTMENTS January 2014-Present Sam Houston State University, Huntsville, TX Assistant Professor, Department of Agricultural Sciences & Engineering Technology January 2013-December 2013 Texas A&M University, College Station, TX Graduate Assistant, Teaching, Department of Architecture August 2010-December 2012 August 2009-May 2010 August 2006-November 2007 August 2004-July 2006 August 2002-December 2003 July 2000-Jun 2001 December 1998-June 2000 Texas A&M University, College Station, TX Instructor of Record, Department of Construction Science Texas A&M University, College Station, TX Graduate Assistant, Teaching, Department of Construction Science State Technological University of Madhya Pradesh, India Visiting Faculty Member, Department of Architecture, SDPS Women s College, Indore State Technological University of Madhya Pradesh, India Visiting Faculty Member, School of Architecture, IPS Academy, Indore Government Women s Polytechnic College, Indore, India Visiting Faculty Member State Technological University of Madhya Pradesh, India Lecturer, IEPT, Indore State Technological University of Madhya Pradesh, India Visiting Faculty Member, IEPT, Indore Page 1

2 AWARDS and ACHIEVEMENTS 2014 National Participant (endorsed by USDOE) to Annex 57 of International Energy Agency, an international project focused on embodied energy and carbon research 2012 Best conference paper award under facilities management category in Joint CIB W070, W092 and TG72 International Conference on Facilities Management, Procurement Systems and Public Private Partnership, Cape Town, South Africa, Herman F. Heep Scholarship, Texas A&M University ASHRAE Houston Chapter Scholarship, International Facility Management Association (IFMA) Foundation Scholarship American Council of Construction Education (ACCE)/ Dupree Construction Education Fund Scholarship ASHRAE Houston Chapter Scholarship 2010 Best conference paper award with Dr. Sarel Lavy by the Emerald Group Publishing Limited in CIB World Congress, 2010 at Salford, United Kingdom 2010 International Facility Management Association (IFMA) Foundation Scholarship 2009 Texas Association of Healthcare Facilities Management (TAHFM) Scholarship 1995 Graduate Aptitude Test of Engineering (GATE) Scholarship, India RESEARCH GRANTS 2014 Enhancing facility performance metrics (FPM) that support decision making for facility asset management. $13,000 Industry-sponsored project, National Science Foundation, Systemic Net-Environmental Impact Modeling of a Building s Embodied, Operating, and Recoverable Energy, $195,111, (PI). Under review National Science Foundation, Texas/Pennsylvania - Focus on Reading - Sustainability Research Network, $430,462, (Co-PI). Under review National Science Foundation, Comprehensive urban ecological and carbon modeling tool, (PI). In preparation Sam Houston State University, An input-output-based hybrid model for the United States economy, $15,000, (PI). Under review National Science Foundation, Physical Building Information Modeling for Solar Building Design and Simulation, Funded (Graduate Student) Page 2

3 RESEARCH PAPERS: PEER-REVIEWED JOURNALS 2015 Dixit, M. K., Culp, C. H., & Fernandez-Solis, J. L. (2015). Embodied Energy of Construction Materials: Integrating Human and Capital Energy into an IO-Based Hybrid Model. Accepted for publication in Environmental Science & Technology. Dixit, M.K., Culp, C.H., Fernández-Solís, J.L., & Lavy, S. (2015). A Facility Management Approach to Reducing Energy and Carbon Footprint of Built Facilities, Submitted to journal Facilities. Minor revisions received Dixit, M. K., Culp, C. H., & Fernandez-Solis, J. L. (2014). Calculating Primary Energy and Carbon Factors for the United States Energy Sectors Accepted for publication in RSC Advances (Royal Society of Chemistry). Dixit, M. K., Culp, C. H., Lavy, S., & Fernandez-Solis, J. L. (2014). Recurrent Embodied Energy and Its Relationship with Service Life and Life Cycle Energy: A Review Paper. Facilities, 32(3/4), 7-7. Lavy, S., Garcia, J. A., Scinto, P., & Dixit, M. K. (2014). KPIs for facility performance assessment: Simulation of core indicators. Construction Management & Economics, 32(12), Lavy, S., Garcia, J. A., & Dixit, M. K. (2014). KPIs for facility s performance assessment, Part I: Identification and categorization of core indicators. Facilities, 32(5/6), 6-6. Lavy, S., Garcia, J. A., & Dixit, M. K. (2014). KPIs for facility s performance assessment, Part II: Identification of variables and deriving expressions for core indicators. Facilities, 32(5/6), Dixit, M.K., Culp, C.H., & Fernández-Solís, J.L. (2013). System boundary for embodied energy in buildings: A conceptual model for definition. Renewable and Sustainable Energy Reviews, 21, Dixit, M.K., Fernández-Solís, J.L., Lavy, S., & Culp, C.H. (2012). Need for an embodied energy measurement protocol for buildings: A review paper. Renewable and Sustainable Energy Reviews, 16 (6), Lavy, S., & Dixit, M.K. (2011). Wall finish selection in hospital design: A survey of facility managers. Health Environments Research & Design, 5 (2), Dixit, M.K., Fernández-Solís, J.L., Lavy, S., & Culp, C.H. (2010). Identification of parameters for embodied energy measurement: A literature review. Energy and Buildings, 42 (8), Lavy, S., & Dixit, M. K. (2010). Literature review on design terror mitigation for facility managers in public access buildings, Facilities, 28(11/12), Lavy, S., Garcia, J., & Dixit, M.K. (2010). Establishment of KPIs (Key Performance Indicators) for comprehensive facility performance measurement: Review of literature. Facilities, 28 (9/10), Page 3

4 RESEARCH PAPERS: PEER-REVIEWED CONFERENCE PROCEEDINGS 2015 Dixit, M. K. (2015). An input-output-based hybrid method for embodied energy calculation. Submitted to ASC 51st Annual International Conference held in conjunction with CIB Workgroup 89, April 22-25, 2015, College Station, TX. Dixit, M.K. (2015). A BIM-based embodied energy calculation prototype for life cycle energy analysis of buildings, Abstract submitted to Building Simulation 2015, 14th International Conference of the International Building Performance Simulation Association, December 7-9, 2015, Hyderabad, India. Dixit, M.K., Yan, W. (2015). Building-integrated photovoltaic prototype for calculating the solar orientation and global solar insolation, Abstract submitted to Building Simulation 2015, 14th International Conference of the International Building Performance Simulation Association, December 7-9, 2015, Hyderabad, India Dixit, M.K., Culp, C.H., Fernández-Solís, J.L., & Lavy, S. (2014). A Facility Management Approach to Reducing Energy and Carbon Footprint of Built Facilities. In Proceedings of Joint CIB W070, W111 and W118 International Conference, Copenhagen, May 21-23, Lavy, S., Garcia, J.A., & Dixit, M.K. (2014). A framework for Key Performance Indicators for a holistic facility performance assessment. Accepted for publication in Joint CIB W070, W111 and W118 International Conference, Copenhagen, May 21-23, Yan, W., Clayton, M., Haberl, J., Jeong, W., Kim, J.B., Kota, S., Alcocer, J.L., & Dixit, M.K. (2013), Interfacing BIM with building thermal and daylighting modeling. In: Proceedings of BS2013, 13th Conference of International Building Performance Simulation Association, Chambery, France, August 26-28, Lavy, S., Garcia, J. A., & Dixit, M. K. (2013), Identifying, categorizing, and quantifying KPIs for facility s performance assessment. In: 2013 Texas Section Spring Conference and Centennial Celebration, ASCE, Corpus Christi, March 19-23, Dixit, M.K., & Yan, W. (2012). BIM-based BiPV prototype for the solar insolation calculation. In: ISG-ISARC Conference on Robotics and Automation in Construction, Eindhoven, June 26-29, Dixit, M.K., Culp, C.H., Lavy, S., & Fernández-Solís, J.L., (2012). Recurrent embodied energy and its relationship with service life and life cycle energy: a review paper. In: Joint CIB W070, W092 and TG72 International Conference, Cape Town, January 22-25, Dixit, M.K., Fernández-Solís, J.L., Lavy, S., & Culp, C.H. (2010). State of Standardization in Embodied Energy Computation: The need for a Protocol. In: Proceedings of the CIB-W70 International Conference in Facilities Management: FM in the Experience Economy, Sao Paulo, September 13-15, 2010, pp Dixit, M.K., Fernández-Solís, J.L., Lavy, S., & Culp, C.H. (2010). Protocol for Embodied energy Measurement Parameters. In: Proceedings of the TG66 - Special Track 18th CIB World Building Congress, Salford, UK, May 11-13, 2010, pp Page 4

5 Lavy, S., & Dixit, M.K. (2010). Facility manager s preferred wall finishes in acute-care hospital buildings. In: Proceedings of the W070 - Special Track 18th CIB World Building Congress, Salford, UK, May 11-13, 2010, pp BOOK CHAPTERS and TECHNICAL REPORTS Lavy, S., Garcia, J. A., & Dixit, M. K. (2010), Developing a categorization matrix of Key Performance Indicators (KPIs): a literature review. In: Proceedings of the CIB-W70 International Conference in Facilities Management: FM in the Experience Economy, Sao Paulo, September 13-15, 2010, pp Lavy, S. and Dixit, M.K. (2014). Industries, needs and demographics. in International Facility Management: Changing Global Viewpoints and Maturity (Ed. Roper, K.O. and Borello, L.), John Wiley & Sons, Yan, W., Haberl, J., Clayton, M., Jeong, W., Kota, S., Kim, J.B., Alcocer, J.L., & Dixit, M.K. (2012), Physical Building Information Modeling for Solar Building Design and Simulation Annual Report NSF CBET , December 2, Yan, W., Haberl, J., Clayton, M., Jeong, W., Kim, J.B., Kota, S., Alcocer, J.L., & Dixit, M.K. (2011), Physical Building Information Modeling for Solar Building Design and Simulation Annual Report NSF CBET , December 1, Katipamula, S., Dirks, J.A., Fernandez, N., Gorrissen, W.J., Brambley, M., & Dixit, M.K. (2010). Tools for evaluation of net-zero community concept and integration of buildings, renewables and the grid. Report PN10070/2312, Pacific Northwest National Laboratory, Richland, WA. PEER REVIEWER Peer-reviewed Journals Energy and Buildings Environmental Science and Technology Energy Energy (AIMS Press) Automation in Construction Construction Management and Economics Sustainability Facilities The International Journal of Life Cycle Assessment The Structural Design of Tall and Special Buildings RESEARCH EXPERIENCE June 2011-August 2011 June 2010-August 2010 PhD Student Researcher, Energy Systems Laboratory, TEES, College Station, TX Participated in Continuous Commissioning training that involved the inspection, verification, and calibration of HVAC systems and controls PhD Intern, Pacific Northwest National Laboratory, Richland, WA Research on economic evaluation of community scale renewable energy options and building retro-commissioning Page 5

6 September 2008-May 2009 Graduate Assistant, Research, Department of Construction Science, Texas A&M University Research on facility performance assessment using Key Performance Indicators. Work included literature survey, derivation of equations, running life cycle cost simulations, and publishing results INDUSTRY EXPERIENCE August 2001-December 2007 August 1998-July 2000 March 1997-April 1998 September 1992-February 1993 Director, Dixit Associates, Indore, India Owned an architecture and landscape design firm; worked on residential, commercial, and industrial construction projects; and rendered programming, design execution, estimating, scheduling, and construction administration services Architect, Alka Kemkar & Associates, Indore, India Provided design execution, estimating, scheduling, and construction administration on a diverse range of public and private architectural and landscape design projects Landscape Architect, Shaheer Associates, New Delhi Involved in landscape design development, construction document preparation, and site supervision. Worked on site planning including road layouts, zoning, storm water design, grading, large water bodies, and landscape design Architectural Intern, Ask Consultants, Indore, India Worked on design development and construction drawing preparation of residential and large commercial construction projects TEACHING: COURSES TAUGHT United States ITEC 4380 Material Handling & Plant Layout Summer 2014, Spring 2015 Industrial facilities planning, plant layout components, space requirements & ergonomics, assembly line balance, material handling system & equipment, and plant layout drawings ITEC 4369: Building Information Modeling Fall 2014 BIM processes and applications, construction visualization, 4D and 5D BIM, clash detection. Includes Revit Architecture, Revit MEP, Revit Structure, and Navisworks Manage. ITEC 4369: Building Systems Spring 2015 Building system design and installation, mechanical equipment, MEP documents, MEP-related codes, MEP system modeling, and Revit MEP ITEC 4367: Engineering Materials Technology Spring 2014, Spring 2015 Page 6

7 Engineering materials properties & selection, crystal structures, failures & fractures, stress & strain analysis, SolidWorks software ITEC 3310: Product Design & Development Fall 2014 Product design, planning, & development process, opportunity identification, customer needs analysis, economic analysis, product design concept generation & selection, downstream product planning ITEC 2363: Architectural Design (Home Planning) Summer 2014, Fall 2014 Architectural design, site analysis, architectural programming, design execution, building modeling and construction documents preparation in Autodesk Revit Architecture ITEC 1371: Descriptive Geometry Spring 2014 Fundamentals of drawings, orthographic & perspective projections, vector and data analysis, graphical methods to solve engineering problems ITEC 1361: Engineering Design Graphics Spring 2014 Engineering drawings, drawing standards, projections, 3D visualization, AutoCAD software COSC 485: Directed Studies 3 credit hours, Texas A&M University Spring 2011 Construction industry introduction, construction contract & construction documents, project delivery systems, construction insurance and bonds COSC 175: Construction Graphics Communications 3 credit hours, Texas A&M University Fall 2011, Spring 2012, Summer 2012, Fall 2012 Construction print reading, construction sketching & documents, basic estimating & scheduling, Computer-Aided Design, basic Building Information Modeling (BIM) COSC 153: Introduction to Construction Industry 3 credit hours, Texas A&M University Fall 2010 Construction estimating and scheduling, construction industry sectors, construction contract and construction documents, project delivery systems, and construction insurance and bonds India Building Construction-VI Construction details of wood & steel doors & windows, wood paneling, wood flooring & roofing systems, shoring & underpinning systems, and field trips to construction sites Page 7

8 Building Construction-VII Construction details of wood, steel, & concrete framing systems, reinforced concrete structure, formworks & scaffolds, steel structure systems (e.g. north light trusses, tubular trusses, open web joists, & metal decking), and field trips to construction sites Working Drawing (Construction Drawing) Construction document preparation & organization, architectural, civil, & structural, electrical & plumbing layouts, and building permit Site Planning & Landscape Design Site analysis and site planning; contour plans and grading; earthwork calculation; storm water design; road and parking layout; and landscape design Architectural Design Studio (Design III, V, VII) Design conceptualization, finalization, design development, presentation, and review. Also included site analysis, planning, and design. Presentation included 3D CAD models, physical models, sketches, and 3D renderings by hand. SKILLS Software Programming Languages Other BIM: Revit Architecture, MEP & Structure; Navisworks Manage CAD: AutoCAD, SolidWorks, Trimble SketchUp Project Management: Primavera, MS Project Energy Simulation: equest, Energy Plus, DOE 2.0, Radiance, Athena Other: MS Office Suite, Adobe Photoshop Elements, InDesign Visual Basic, C# Programming English, Hindi BIM (4D BIM) and BIM add-in tools Advanced knowledge of building energy simulation and optimization Trained in Continuous Commissioning (CC) of HVAC systems Advanced knowledge of life cycle energy and cost modeling (cash flow analysis) AFFILIATION and CERTFICATES Page 8 Green Building Certification Institute-LEED Accredited Professional OSHA-30 hours Safety Certification Facility Management Certificate, Texas A&M University Former Secretary, Texas A&M ASHRAE Student Branch, Former President, International Facility Management Association Student Chapter, 2013 Registered Architect, Council of Architecture (COA), India Registered Landscape Architect, Indian Society of Landscape Architects (ISOLA)

9 SERVICE Serving as the National Participant in Annex 57, International Energy Agency Design and development of two new courses focused on BIM and MEP systems in Engineering Technology program at Sam Houston State University Member, task force for syllabus design of new construction graphics course, Department of Construction Science, Texas A&M University Member, Team for Bat House project, Sam Houston State University Performed community services under Big Event in College Station, TX Advising students on their academic and industry career Served on the student chapters of various professional organizations Served as a Mentor of design and drafting for the robotics competition team at A&M Consolidated Middle School, College Station, TX. Page 9