Staron Preformed Worktop Range Sales Guide The bespoke quality worktop with easy installation

Transcription

1 Staron Preformed Worktop Range Sales Guide 2009 The bespoke quality worktop with easy installation Valid from Jan 2009

2 Contents 3. Introduction 4. Staron colours 5. Staron Product Specification 6. Worktops 7. Accessories 8. Kitchen Sink Modules 9. Vanity Bowl Modules Contacts Christine Alwood Sam Noh 10. Cutting & Joining 11. How to place your order 12. Quality Inspection 13. Samsung Warranty 14. Samsung Staron solid surface Care & Maintenance 15. Staron UK Terms & Conditions of Sale 2 Staron UK Ltd Unit 5 Orde Wingate Way Primrose Hill Industrial Estate Stockton On Tees TS19 0GA T F E mail: info@staron.co.uk

3 Introduction Staron is high performing, durable and easy to maintain All the best qualities of solid surface material are at your convenience for your kitchen/bathroom. With flexible colour range and 12 off the shelf colours, you can redesign your kitchen or bathroom with a luxury and long lasting worktop: a bespoke look without a bespoke price. The non- porous worktop means that keeping your room hygienically clean and beautiful is easier than ever before. All worktops are repairable and can be brought back to their original state with a simple procedure. Staron worktops offer seamless finishing and routed drainer grooves on the worktops. Indeed it is possible to have an integrated unit comprising splash back worktop and sink seamlessly flowing from one part into the next. 3

4 Staron Colours Staron sink colours Staron worktop colours & Price Group Cast form Sink: Available in Solid Bright White, Solid Pearl, Solid Ivory only. Group A Group B Group C Group D Solid Sanded Aspen Pebble Thermoformed sinks Available in all worktop colours with stainless steel base. All sink/bowl modules are seam mounted 4

5 Staron Product Specification STARON WORKTOP 1000mm x 650mm x 38mm 1500mm x 650mm x 38mm 3000mm x 650mm x 38mm CAST SINK MODULES 1500mm x 650mm x 38mm With single / double sinks STARON BREAKFAST BAR 1000mm x 900mm x 38mm 2100mm x 900mm x 38mm 2400mm x 900mm x 38mm COLOUR MATCHING SINK MODULES 1500mm x 650mm x 38mm With single / double sinks SPLASH BACK 1200mm X 600mm X 6 mm 2500mm X 600mm X 6 mm 3000mm X 600mm X 6 mm STARON CAST BOWL MODULES 1000mm x 650mm x 38mm & one bowl 1500mm x 650mm x 38mm & two bowls 2000mm x 650mm x 38mm & three bowls UPSTAND 1200mm X 100mm X 6 mm 2500mm X 100mm X 6 mm 3000mm X 100mm X 6 mm COLOUR MATCHING BOWL MODULES 1000mm x 650mm x 38mm & one bowl 1500mm x 650mm x 38mm & two bowls 2000mm x 650mm x 38mm & three bowls EDGING STRIP 40mm X 6 mm INSTALLATION KIT APPLICATOR ADHESIVE CARE & MAINTENANCE KIT CONNECT & BOLT BISCUIT ALUMINUM FOIL TAPE JOINING & CUTTING PRICE BAND WORKTOP COLOUR ADHESIVE MATCH A Solid Bright White B - White A Solid Natural Pearl B Sanded Dark Nebula Black B Sanded Grey Magic B Sanded Sahara Magic B Sanded Seafoam Magic B Sanded Pine Green C Aspen Glacier N- White C Aspen Dark L- Black D Pebble Blue Blue D Pebble Gold Ivory D Pebble Ebony Onyx 5

6 Staron Preformed Worktops Staron Worktop Blank System WORKTOP PRICE (650mm X 38mm) Available Lengths 1000 mm 1500mm 3000mm BREAKFAST BAR (900mm X 38mm) 1000 mm 2100mm 2400mm SPLASH BACK (600mm X 6mm) 1200 mm 2500 mm 3000 mm EDGING STRIP (40mm X 6mm) 1000 mm 2000 mm 3000 mm UPSTAND (100mm x 6mm) 1000 mm 2000 mm 3000 mm 6

7 Staron Accessory Product description INSTALLATION KIT 10 x 80 grit sanding discs 10 x 150 grit sanding discs 10 x 240 grit sanding discs 10 x 320 grit sanding discs 10 x 400 grit sanding discs 1 x Light Duty abrasive pad 1 x 355ml Countertop Magic 1 x Micro fibre Cloth 1 x Instruction Manual APPLICATOR 50ml Applicator Gun ADHESIVE 50ml Cartridge CARE & MAINTENANCE KIT 1 x Light Duty abrasive pad 1 x 355ml Countertop Magic 1 x Staron Care and Maintenance Guide 1 x Micro fibre Cloth CONNECT & BOLT BISCUIT 3 x bolts 3 x biscuits ALUMINIUM FOIL TAPE 50mm x 4500mm 7

8 Staron Kitchen Sink Modules All Kitchen sink Modules :1500mm x 650mm x 38mm 1 1/2 sinks available in both left & right handed version Things to remember when you order: 1. All sinks standard without overflow. Please specify if you require overflow. 10 for the kit 2. Worktop colour & sink colour Cast form sinks Module A : N50 & N100 Available in Titan White only Worktop colours Sink colour Module B : A1181 Available in Solid Bright White, Solid Pearl, Solid Ivory only Worktop colours Sink colours Thermoformed Sinks all with Stainless steel base Module C : TK0150 & TK0379 Available in all worktop colours Worktop colours Module D : TK0376 & TK0436 Available in all worktop colours Sink colours Module E : TK0524 Available in all worktop colours 8

9 Staron Vanity Bowl Modules Staron Basin Module mm x 650mm x 30mm mm x 650mm x 30mm mm x 650mm x 30mm Cast form vanity bowl Module F : A3181 Available in Solid Bright White, Solid Pearl, Solid Ivory only Worktop colours Bowl colours Thermoformed Vanity Bowl Module G : TE0465 Available in all worktop colours Worktop colours Bowl colours 9

10 Cutting & Joining Services Service Description Single sink cut-out Single sink under mount Double sink cut-out Double sink under mount Tap hole Hob cut-out Butt & Scribed joint Cut out and under mount sinks must be provided with a template and positioning of the template specified with a layout diagram. E.g. Worktop A Worktop B Worktop colour: Sanded Dark Nebula Worktop A : Qty 3000mm worktop 1 Double sink cut out 1 Sink Under mount 1 Tap hole cut out 1 Butt & Scribed joint 1 Worktop B: 1500mm worktop 1 Hob cut out 1 Care & Maintenance Kit 1 Total Total Excludes delivery & VAT 10

11 How to place your order Placing your order with Staron UK Ltd must be done by FAX or . Please send your drawing or required measurement of your worktop when you place an order. Any templates for cutout must be sent to Staron UK address. Delivery All delivery is charged per cost. Delivery period will generally be between 3 7 working days. Thermoformed sink/vanity bowl module units are individually made and may take up to working days. Collection must be agreed with Staron UK office within a notice of 48 hours. Payment Terms All prices are exclusive of Value Added Tax & delivery. We will accept credit card payment. The general Terms and Conditions are as laid out in our Conditions of Sale. Cancellation Any orders with joining, cutting and thermoformed sinks/ bowls can not be cancelled once order is confirmed. Later cancellation and returns of goods delivered are subjected to 20% cancellation fee plus the cost of collection is also chargeable. 11

12 Staron Quality Inspection Staron Worktop/Breakfast bar is manufactured in UK and uses Samsung Staron Solid Surface which is 100% acrylic. It has high resistance to heat, bacterial growth and also impact, making it ideal for domestic and commercial kitchens. It is easy to install and repair if any damage occurs. Although Staron Worktop/ Breakfast bar is repairable and long lasting you must look after it in the suitable way for the worktop to last longer. Please read Staron Care and Maintenance Guide for more information. Before installation you must check for the quality of the material. The goal at Samsung Staron is to provide the highest quality materials to ensure customer satisfaction. As a result, we check and re-check each individual sheet to meet our rigorous quality standards. However, it is the fabricators' responsibility to conduct a visual inspection for defects and colour match for every sheet they work with. WORKTOP Inspection The colours of Staron sheet material could vary between batch numbers due to the complex product cycle. Please follow the guide lines for your best colour match and quality of Staron sheet materials. Check either the batch number or use the material from the same pallet. When ordering, inform us with the project information and request for the same batch number. Inspect the worktops for any discoloration before fabricating. Check for warping/curving/concave or any delamination of the worktops. ADHESIVE Inspection Please read Staron Fabrication Guide book for Staron Adhesive health and safety and its physical properties. When using or storing Staron adhesives please check the following; Correct adhesive colour match for the sheet. Check for any leakage Shelf life (24 months after production date. Ideally stored at 12C 15C.) When purging check for discoloration. Curing time 45minutes after mixing 20c but varies with the room temperature. Homogeneous mixing check the mixer tip and good blending of colours. SINK Inspection Please check the following when you receive your sink; The condition of packaging any damages on the exterior which may have caused an impact on the sink Check for your accessories and details such as the overflow/waste kits and holes. Colour variation or any possible cracks in the sink. 12

13 Samsung Staron Warranty Terms & Conditions TRANSFERABLE 10 YEAR LIMITED WARRANTY This warranty is transferable within a 10-year period following initial installation only if the new owner writes to SAMSUNG to register the installation under a new owner s name. In case of a quality claim on Samsung Staron solid surfaces worktops/sinks/bowls, they will be replaced without charge (excluding labour). STARON WARRANTY DOES NOT COVER: 1. Wear & Tear Minor conditions such as stains, scratches, water spots and burns which, due to the unique properties of STARON, may be corrected by techniques specified in Care & Maintenance instructions. The following colours require more maintenance Aspen Dark, Pebble Blue, Pebble Ebony, Sanded Dark Nebula. Samsung/Staron UK will not accept any warranty claims for scratches, haziness, and marking for any residential or commercial applications under our 10 Year Limited Warranty on the above mentioned colours. 2 Poor Fabrication/ Installation Failure to comply with SAMSUNG/Staron UK s instructions including fabrications, installation and care & maintenance etc Dissatisfaction with appearance of joints or seams, or and adhesive. Caulk or other accessory items can not be claimed under Samsung 10 year warranty. SAMSUNG/ Staron UK has no liability for any loss or any damages including direct, consequential or incidental damage, arising out of the use or inability or to use STARON products 3. Poor Application Any product moved from their original place of installation or wrong application for the product. In cases where you have followed the guide lines above and is found to be unsatisfactory please contact our office or our Staron representative. 13

14 SAMSUNG Staron Solid Surface Care & Maintenance 1. PREVENTING DAMAGE In most cases, Staron Solid Surfaces can be repaired with ease if accidentally damaged. However, be sure to follow these guidelines to prevent any damage to Staron. HEAT DAMAGE: Staron Solid Surfaces have excellent heat resistant properties compared with other ordinary countertops. However, placing hot pans, as well as some heat-generating appliances such as frying pans or pots, can damage the surface. Always use a hot pad or a trivet with rubber feet to protect Staron. Avoid subjecting Staron Solid Surfaces to temperatures over 80 C (170 F). OTHER DAMAGE: Avoid exposing Staron Solid Surfaces to strong chemicals such as paint removers and oven cleaners. Surfaces exposed to these chemicals should be promptly flushed with water. Prolonged contact will cause spots that may require extensive repairs. Do not cut directly on a Staron Solid Surfaces surface; always use a cutting board Run cold water when pouring boiling water into sinks Remove nail polish with a non-acetone-based nail polish remover and flush with water NOTE: Any of the above can affect the surface finish and colour. Dark colours may require more maintenance. Staron solid composition makes it easy to maintain because it is homogenous. The surface can be restored to its original sheen by removing stains and scratches with a detergent. Periodic maintenance is recommended to retain surface quality and appearance. 2. CLEANING SURFACES, SINK & BOWL Occasionally clean the surface with soap, water and an ammonia-based cleanser using a sponge or damp cloth and then dry towel. TO REMOVE SEVERE AND DIFFICULT STAINS: DULL FINISH: Use an abrasive cleanser and a green Scotch-Brite (registered trademark of the 3M company) pad. Rub in a circular motion. SEMI-GLOSS FINISH: Use mild abrasive cream such as Cif, diluted with bleach and a white Scotch-Brite pad. Rub in a circular motion. HIGH-GLOSS FINISH: Follow the procedure for semi-gloss, but use a sponge instead of a Scotch-Brite pad, or use a white polishing compound in a circular motion. 3. DISINFECTING SURFACES AND SINK & BOWL Wipe occasionally with diluted household bleach (water: bleach solution in 1:1 ratio) 4. REMOVING CUTS AND SCRATCHES When Staron Solid Surfaces are scratched or cut, repairs should be based on the following recommendations. Staron Solid Surfaces highly recommend that extensive repairs should be performed by Certified Staron Solid Surfaces fabricators. DULL FINISH: Sand with 180 grit (120 micron) or 220 grit (60 micron) fine sandpaper until the cut and scratch is removed. Restore finish with soap, water and a green Scotch- Brite Pad and match the finish of the adjacent surface. SEMI-GLOSS FINISH: Sand with 400 grit (30 micron) sandpaper, and restore finish with a nonabrasive cleanser and a white Scotch-Brite pad. HIGH-GLOSS FINISH: Sand with 400 grit (30 micron) or 600 grit (20 micron) sandpaper, and buff with a polishing com pound and a low-speed ( rpm) polisher using a wool pad. Finish with wax. Contaminants that can be cleaned with; Water Alkaline Solutions Coffee Fruit Juice Household Soap Hydrogen Peroxide Milk Nail Polish Remover Olive Oil Shoe Polish Soy Sauce Synthetic Detergents Tea Vinegar Water-soluble Ink House Hold Cleaners Cosmetics Crayon Eye Shadow Hair Dye Iodide Solution Ketchup Oleaginous Ink *All of the above sanding and polishing should be done in a circular motion. For more detailed information, please contact your Staron representative 14

15 STARON UK LTD CONDITIONS OF SALE 1. DEFINITIONS: Under the terms and conditions of sale set out above: The Company means Staron UK Limited. The Buyer means the corporation, firm, company, institution, person or persons to whom a quotation is made or to whom goods are sold by the Company. Goods means products supplied by the Company under this contract. Customer means the corporation firm, company, institution, person or persons. 2. GENERAL Any order accepted by the Company whether or not it is based on or results from this or any other quotation or tender given by the Company is deemed to incorporate these terms and conditions: no variation or modification of or substitution for these terms and conditions (even if included in or referred to in the document placing the order) shall be binding on the Company unless specifically accepted by the Company in writing. 3. VALIDITY OF QUOTATION unless previously amended or withdrawn the Company s quotation is open for acceptance for the period stated therein or where no period is stated for 30 days after the date thereof. The Company s quotation is not an offer but merely an invitation to the Buyer to make an order for goods under the terms and conditions of the quotation. 4. CONFIRMATION OF ORDERS accepted by the Company may not be cancelled under any circumstances unless agreed in writing by the Company. Cancellation of goods ordered to the buyer s own specification will not be accepted. Orders by cable, telegram, fax, or telephone are accepted only at the Buyer s own risk and subject to these conditions. They should always be confirmed by the Buyer in writing. 5. RETURNED GOODS once dispatched may not be returned without the Company s consent in writing. In any event where such consent is given a re-stocking charge of 20% of the price of the goods will be made. Goods returned must be adequately identified and packed and sent carriage paid and must be received in the same perfect condition as at date of dispatch from the Company s warehouse. 6. WARRANTY The Company s goods are tested or examined before dispatch but are supplied without any warranty condition or guarantee express or implied that they are suitable for use under any special conditions or for any particular purpose although such condition or purpose may be known to the Company at the time nor in the absence of a specific guarantee in writing is any guarantee given as to the life or wear of the Company s goods. The Company will however repair or at their option replace goods in which defects under proper use appear within a period of twelve calendar months after installation and which arise solely from faulty design or materials other than design or materials made or specified by the Buyer, provided always that acceptable proof is rendered as to the date of purchase and any defective parts are promptly returned free to the Company s address. The provisions of the Sale of Goods Act 1979 and Unfair Contract Terms Act 1977 shall apply to this contract, but this guarantee is given in lieu of all warranties or conditions and liabilities whatsoever implied by law, statute or otherwise, and in particular, without prejudice to the generality of the foregoing, the Company shall not be liable for loss of profit or goodwill of the Buyer or any other person arising, directly or indirectly, from any breach of this contract or for any other indirect or consequential damage whatsoever. Save as provided in this clause neither the Company nor its servants and agents shall be under any liability whether in contract, tort or otherwise howsoever, in respect of the Goods or for any injury, damage or loss whatsoever and howsoever resulting there from or from any work done in connection therewith. The Company provides no guarantee of the workmanship or fabricators chosen by the customers. 7. PRICES are subject to alteration or withdrawal without notice. Orders can only be accepted subject to the condition that Goods will be invoiced at prices ruling on the date of despatch from the Company s premises unless otherwise stated on an official quotation of the Company. Unless otherwise stated, prices are net ex works excluding VAT. 8. DELIVERY, Unless otherwise specified in the quotation, delivery shall take place when the Goods are delivered to the Buyer s premises, or to such other premises as shall be stipulated in the contract. If by reason of the Buyer s default the goods are not taken up or delivered by the date specified in the contract, the Company may either treat the contract as repudiated or alternatively store the goods at the Buyer s own risk and expense. Estimates of delivery dates and times are to be regarded as approximates only and the Company accepts no liability for any loss, injury, damage or expenses consequent upon any delay in delivery of goods. Delay due to circumstances outside the control of the Company shall not entitle the customer to cancel any order or refuse to accept delivery. Offers for delivery from stock are made subject to goods remaining unsold at the time receipt of order. Orders 9. PROPERTY IN THE GOODS The ownership of goods supplied under this contract will only pass to the Buyer when all monies owed to the Company, in particular in respect of (a) the Goods and (b) all other goods the subject of any other contract between the Buyer and the Company which, at the time of payment of the full price of the Goods, have been delivered to the Buyer but not paid for in full, have been paid. Until that time the aforementioned goods (including the Goods) will remain the Company s property. Until actual payment of all sums due by the Buyer to the Company, the Buyer shall store and mark the Goods in such a manner that they shall be readily ascertainable as Goods which are the property of the Company, provided that this shall not prevent the Buyer from selling and using the Goods in the ordinary course of his business until such permission has been withdrawn pursuant to clause RISK shall pass when the goods are delivered to the Buyer, delivery being defined as in clause 8 above. 11. PAYMENT Liability for payment for Goods shall arise on delivery, to or collection by the buyer and such payment must be made not later than the end of the month following the month of invoice any discounts specified in the Company s quotations shall relate only to payments so received. The Company reserves the right to charge interests on overdue amounts at the rate per annum of 2.5% above the Bank of England minimum lending rate ruling on the last date on which payment must be made. If payment is not made by such date or if the Buyer is in default as regards payment under this contract with the Company (without prejudice to its other rights) reserves the rights. (a) To suspend deliveries under this contract for so long as the default continues. (b) To serve notice on the Buyer that if sums due under this contract are not paid within 14 days, the Company shall be entitled to treat this contract as repudiated or (c) To sue for the price, notwithstanding that property of the goods have not passed to the Buyer. After service of the notice described in (b) above, or on the occurrence of any of the circumstances described in clause 12 as entitling the Company to treat this contract as repudiated the Buyer shall not submit Goods to any process of manufacture, incorporate them or mix them with other goods, nor change their nature in any way whatsoever nor shall the Buyer sell any goods which are still the property of the Company to a third party until all monies due to the Company are paid. Please note that under the provisions of the Late Payment of Commercial Debts (Interest) Act 1998 we are entitled to charge interest at the rate of 8%per annum over the Bank of England base rate on any sums due past any credit period. The Act also provides that a charge may be made by way of late payment compensation. Please note we reserve the right to levy these charges at our discretion. 12. INSOLVENCY Without prejudice to its other rights, the Company may by notice treat this contract as repudiated if: the Buyer is wound up or dissolved or enters into liquidation whether compulsory or voluntary (except for the purpose of a solvent reconstruction or amalgamation), or the Buyer becomes insolvent within the meaning of section 61 (4) Sale of Goods Act 1979 or becomes bankrupt or enters into any voluntary arrangement or composition with his creditors, if the Buyer is an individual, or if the Buyer has any action, application or proceedings taken in respect of it for a Voluntary Agreement (as defined in Section 1 (1) of the Insolvency Act 1986) or effects a composition or reconstruction of its debts, or if the Buyer has an administration petition presented, or has a receiver, liquidator, administrative receiver, trustee or similar officer appointed, or if the Buyer is unable to pay its debts (as defined in section 123 of the Insolvency Act 1986), or a meeting is convened at which a resolution to wind up the Buyer will be proposed or on the passing of a resolution, or on any other event or default of any nature whatsoever which would cause the company reasonably to consider that its ownership of the Goods or in their proceeds of resale may be adversely effected, or that it is unlikely to be paid in full for the Goods. When such notice is given, all Goods that remain the property of the Company shall forthwith be redelivered to the Company at the Buyer s risk and expense and for the purpose of taking possession of such Goods, the Buyer, for itself, its administrators, receivers, managers, liquidators or trustees in bankruptcy hereby grant to the Company an irrevocable license to enter its premises for the purpose of taking possession or repossession of the Goods PART PAYMENT AND RESALE If notwithstanding the Buyer s default, the Company chooses to enforce this contract, it shall recover and sell only so many of the Goods as may be necessary to obtain the full purchase price, interest and any other sums due from the Buyer with such further sum as represents proper damages for the Buyer s breach of contract. Any surplus Goods or funds obtained from such resale shall be passed on to the Buyer. If the Company chooses to treat this contract as repudiated, the Company shall repay to the Buyer any part payment of the purchase price of those Goods which remains after deduction of an amount representing damages for the Buyer s breach of contract. If the Buyer sells any Goods which remain the Company s property, the proceeds of resale and/or the claims to such proceeds shall at all times be held on trust for the Company and the Buyer shall pay all such proceeds into a bank account separate from all other monies and the Company shall account to the Buyer for any sums in excess of the price of the Goods and other sums payable under this contract. 14. LAWS APPLICABLE Any contract subsisting between the Company and the Buyer shall be construed in all respects in accordance with the Laws of England and unless otherwise arranged is subject to the conditions of the English Courts. 15. ERRORS Clerical errors and omissions are subject to correction without notice. 16. DAMAGE OR SHORTAGE Where goods are delivered by outside carriers damage or part loss claims cannot be entertained unless the carriers and the Company is notified in writing within 2 days from date of delivery. Where goods are delivered by the Company and a receipt of a delivery note signed by the customer is received, the goods will be deemed to have been examined and therefore no claim for damage or loss can be entertained by the Company. The Buyer may not exclude this provision either by making his signature unexamined or by failing to return the signed delivery note or otherwise. 17. NOTICES shall be in writing sent to the address of the appropriate party set out on the face of this contract or to such other addresses as may from time to time (by notice to the other party) be designated, and notices shall be deemed to have been duly given. (1) On the date of transmission if sent by cable, telegram or fax. (2) On the date of delivery if delivered by hand (3) Two days after the date of posting if sent by First Class Mail In providing service by post it shall be sufficient to prove the envelope containing the notice as properly addressed, stamped and posted. 18. NO WAIVER No relaxation, forbearance, indulgence or delay by either party in enforcing any of the terms of this contract or the granting of time by either party to the other shall affect, prejudice or restrict the rights of the other party under this Agreement nor shall any waiver of any breach of this Contract operate as a waiver of any subsequent breach. Staron UK Ltd Unit 5 Orde Wingate Way Primrose Hill Industrial Estate Stockton On Tees TS19 0GA Telephone: Fax: info@staron.co.uk Website:

16 Staron UK Ltd Unit 5 Orde Wingate Way Primrose Hill Industrial Estate Stockton On Tees TS19 0GA Telephone: Fax: info@staron.co.uk Website: