One and Done. The BMP 41 Label Printer Does It All.

Transcription

1 One and Done. The MP 41 Label Printer Does It ll. radyid.com/bmp41

2 The Printer That Does It ll! rugged, hand-held printer that gives you the versatility of both die-cut and continuous labels, along with auto-formatting labels, an ultra-easy user interface and rady s legendary label performance all in the same printer! Die-cut Labeling Efficiency Die-cut labels improve your efficiency and save you a lot of hassle so you can stay focused on getting your project done. With the MP41 printer, you get: Individual pre-cut labels that stay in sequence on liner No need to sort through a pile of labels Easy to hand an entire kitted job to another technician for installation or transport to jobsite Labels that easily peel off the liner No need to cut labels with a scissors nd of course, the MP41 printer still allows you to make continuous cut-to-length labels, strips and flags when you need to. More Flexibility, More Parts, More Speed Have more control over your label content and print your jobs faster and easier than before. The MP41 printer has a large screen, intuitive interface, lots of text editing flexibility with a variety of text sizes and more control over how text appears on your label. In addition, you get a broader range of materials that are easy to install, an all-in-one label plus ribbon cartridge and smart-chip technology that formats your label with a touch of a button. Its built-in applications include: Wire & Cable ID Mode Cable Flag Mode Terminal lock & Patch Panel Mode Circuit reaker ox Strip Mode 66-, 110-, IX- lock for Datacomm Mode DesiStrip Mode for Faceplates anner Mode for General Labeling 2

3 Exceptional Material Durability for the pplications You Need rady materials and label types are made to impress! Our materials will not only meet your project specs, but they ll stick and stay stuck. We set the bar high with industry-leading performance and quality standards because our materials are developed by us in our facilities by our large team of R&D experts. This means no matter what your application is, the MP41 printer has you covered with: Wire and cable marking with labels, self laminating wraps, heatshrink sleeves or flags Panel and component labeling for electrical and automation Production and Lean/5S labeling with ultra-durable colored labels Facility and equipment labeling with 8-10 year chemical resistant outdoor vinyl labels Datacomm equipment and port labeling with individual labels or continuous strips MP 41 Printer t--glance Grab-and-go printer with rugged rubber bumpers uilt-in auto-formatting apps for wire ID, cable flags, terminal blocks, patch panels, 110-/66-/IX blocks, faceplates, circuit breaker boxs and general banner labels Tape widths from to label parts, 11 materials 300 dpi print sharpness Drop-lock-and-print cartridges with label and ribbon Rechargeable NiMH battery or C adapter Large 2.1 x 1.4 backlit display Robust text editing, 12+ text sizes and label formatting options 440 symbols for electric, smart home, safety and datacomm Label grabber holds label after printing QWERTY style keypad for easier and faster typing PC connectivity for use with rady LabelMark label creation software 2-year warranty Sampling of the easy-to-use menu keys: Label Type Symbol General Wire Marker Flags rrows Datacomm Terminal lock Patch Panel DesiStrip Electrical International 66-lock 110-lock IX lock Fire Mandatory radyid.com/bmp

4 Self-Laminating Vinyl Wire & Data Cable Markers (-427) Feature a clear, non-printable area that wraps around wires and cables to serve as an overlaminate. These markers are designed to adhere to highly curved surfaces, wires and cables Self-Laminating Vinyl Material - Resistant to abrasion, water, oil and solvents. Temperature range: -40 F to 158 F (-40 C to 70 C), UL recognized. TEXT 1 C TEXT 1 Figure 32 TEXT 1 TEXT 2 Figure 42 (continuous) C Fits Printer Models Diagram Catalog# Color pprox. Wire Gauge* Max Wire Dia. Label Width Label Height Print-On Height C Labels/ Roll Sized To Fit MP41, 51, 53 Fig. 32 M K on WT Gauge (4.1) (12.7) (19.1) (9.5) 360 CT-6, 4 pair UTP Copper MP41, 51, 53 Fig. 32 M K on WT Gauge (4.1) (25.4) (19.1) (9.5) 340 CT-6, 4 pair UTP Copper MP41, 51, 53 Fig. 42 MC K on WT Gauge (6.7) 25 ft (7.6 m) (19.1) (9.5) 1 roll (cont.) CT-6, 4 pair UTP Copper MP41, 51, 53 Fig. 32 M K on WT Gauge (5.3) (25.4) (12.7) (9.5) pair Fiber/Coaxial, Single/Multi-Mode MP41, 51, 53 Fig. 32 M K on WT Gauge (5.3) (25.4) (19.1) (9.5) 200 CT-6, 4 pair UTP Copper, Fiber, Coaxial MP41, 51, 53 Fig. 32 M K on WT Gauge (5.3) (19.1) (25.4) (9.5) pair Fiber/Coaxial, Single/Multi-Mode MP41, 51, 53 Fig. 32 M K on WT 10-4 Gauge (6.7) (12.7) (31.7) (9.5) 200 CT-6, 4 pair UTP Copper MP41, 51, 53 Fig. 32 M K on WT 10-4 Gauge (6.7) (25.4) (31.7) (12.7) 200 CT-6, 4 pair UTP Copper, Fiber, Coaxial MP41, 51, 53 Fig. 32 M K on WT 10-4 Gauge (8.1) (12.7) (38.1) (12.7) 180 CT-6, 4 pair UTP Copper MP41, 51, 53 Fig. 32 M K on WT 10-4 Gauge (8.1) (19.1) (38.1) (12.7) 180 CT-6, 4 pair UTP Copper MP41, 51, 53 Fig. 32 M K on WT 10-4 Gauge (8.1) (25.4) (38.1) (12.7) 180 CT-6, 4 pair UTP Copper, Fiber, Coaxial MP41, 51, 53 Fig. 32 M YL K on YL 10-4 Gauge (8.1) (25.4) (38.1) (12.7) 180 CT-6, 4 pair UTP Copper, Fiber, Coaxial MP41, 51, 53 Fig. 32 M K on WT 3 Gauge - 2/ (13.5) (25.4) (63.5) (19.1) pair Copper, 4-12 pair Fiber, Coaxial MP41, 51, 53 Fig. 32 M YL K on YL 3 Gauge - 2/ (13.5) (25.4) (63.5) (19.1) pair Copper, 4-12 pair Fiber, Coaxial MP41, 51, 53 Fig. 32 M K on WT 3/0-400 kcmil (21.6) (25.4) (101.6) (25.4) pair Copper, 24 pair Fiber, ackbone MP41, 51, 53 Fig. 32 M YL K on YL 3/0-400 kcmil (21.6) (25.4) (101.6) (25.4) pair Copper, 24 pair Fiber, ackbone PermaSleeve PS Wire Marking Sleeves (-342) These 3:1 shrink ratio heat-shrink sleeves are the ultimate in marker durability, permanence and aesthetic appearance. Fast shrink rate saves time and costs during installation. PermaSleeve wire markers are available as individual die-cut sleeves or continuous cut-to-length tubing. (Ø diameter) For 1" die-cut sleeves, check out rady's MP 51 Label Printer. Figure 44 (Ø diameter) Figure 58 Fits Printer Models Diagram Catalog # # Color pprox. Wire Gauge* For Wire Diameters Min. Max Supplied Width Supplied Diameter Sleeves/Roll MP41, 51, 53 Fig. 44 M K on WT Gauge ( ) (19.1) (5.9) 80 MP41, 51, 53 Fig. 58 MC K on WT Gauge ( ) 7 ft (2.1 m) (5.9) 1 roll (cont.) MP41, 51, 53 Fig. 58 MC YL -342 K on YL Gauge ( ) 7 ft (2.1 m) (5.9) 1 roll (cont.) MP41, 51, 53 Fig. 44 M K on WT Gauge ( ) (19.1) (8.5) 80 MP41, 51, 53 Fig. 58 MC K on WT Gauge ( ) 7 ft (2.1 m) (8.5) 1 roll (cont.) MP41, 51, 53 Fig. 58 MC YL -342 K on YL Gauge ( ) 7 ft (2.1 m) (8.5) 1 roll (cont.) MP41, 51, 53 Fig. 44 M K on WT 16-8 Gauge ( ) (19.1) (11.1) 80 MP41, 51, 53 Fig. 58 MC K on WT 16-8 Gauge ( ) 7 ft (2.1 m) (11.1) 1 roll (cont.) MP41, 51, 53 Fig. 58 MC YL -342 K on YL 16-8 Gauge ( ) 7 ft (2.1 m) (11.1) 1 roll (cont.) MP41, 51, 53 Fig. 44 M K on WT 12-4 Gauge ( ) (19.1) (16.4) 80 MP41, 51, 53 Fig. 58 MC K on WT 12-4 Gauge ( ) 7 ft (2.1 m) (16.4) 1 roll (cont.) Nylon Cloth Cable Flags (-499) Pre-formatted with two printable areas, allowing label to be easily folded around wires to create a two-sided, printed flag Nylon Cloth Material - Permanent adhesive. Pliable for rough or smooth surfaces. Temperature Range: -94 F to 194 F (-70 C to 90 C). UL recognized. C TEXT 1 TEXT 2 Non-print rea TEXT 3 TEXT 4 Figure 63 Centering Line Label Width Label Height Non-Print rea Fits Printer Models Diagram Catalog # # Material Color MP41, 51, 53 Fig. 63 M Nylon Cloth K on WT (25.4) (25.4) (6.3) 90 4

5 Vinyl Cloth dhesive Wire & Cable Labels (-498) Printer automatically repeats your text to fill the label for maximum readability. Repositionable vinyl cloth material s special adhesive stays put, but marker can be removed and reapplied if necessary. Temperature range: -40 F to 175 F (-40 C to 70 C). UL Recognized. Figure 29 Fits Printer Models Diagram Catalog # # Material Color pprox. Wire Gauge* Max. Wire Dia. Label Width Label Height MP41, 51, 53 Fig. 29 M Vinyl K on WT Gauge (2.8) (12.7) (12.7) 240 MP41, 51, 53 Fig. 29 M Vinyl K on WT Gauge (4.1) (19.1) (12.7) 220 MP41, 51, 53 Fig. 29 M Vinyl K on WT Gauge (5.3) (25.4) (19.1) 180 MP41, 51, 53 Fig. 29 M Vinyl K on WT Gauge (5.3) (25.4) (25.4) 160 MP41, 51, 53 Fig. 29 M Vinyl K on WT 10-4 Gauge (6.7) (25.4) (12.7) 180 MP41, 51, 53 Fig. 29 M Vinyl K on WT 10-4 Gauge (6.7) (38.1) (25.4) 120 Labels/ Roll Inside-Panel Component Labels for Electrical & utomation (-422, -428, -483, -499 and -595) Variety of durable materials ideal for marking backer boards, DIN rail, relays, PLCs, switches and solenoids. Create serial or rating plates with barcodes, graphics and more with a flexible high-tack adhesive for easy and long-lasting adhesion Polyester Material - Permanent adhesive, good for powder-coated/textured surfaces. est on flat surfaces. Temperature Range: -40 F to 212 F (-40 C to 100 C). UL recognized Metalized Polyester Material - Permanent adhesive, silver finish. Temperature Range: -40 F to 176 F (-40 C to 80 C). UL recognized Polyester Material - Permanent adhesive for powder-coated/textured surfaces. est on flat surfaces. Temperature Range: -40 F to 248 F (-40 C to 120 C). UL recognized Nylon Cloth Material - Permanent adhesive. Pliable for rough or smooth surfaces. Temperature Range: -94 F to 194 F (-70 C to 90 C). UL recognized Indoor/Outdoor Vinyl Material - Permanent adhesive, very pliable, good for rough surfaces and outdoor use, wide range of colors. Temperature Range: -40 F to 180 F (-40 C to 82 C). UL recognized. Fits Printer Models Diagram Catalog # # Material Color Label Width Figure 29 Label Height -422 Polyester Material MP41, 51, 53 Fig. 33 MC Polyester K on WT (9.5) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.1) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (12.7) (12.7) 280 MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.7) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (15.8) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (25.4) (12.7) 480 MP41, 51, 53 Fig. 29 M Polyester K on WT (25.4) (25.4) 260 MP41, 51, 53 Fig. 33 MC Polyester K on WT (25.4) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (38.1) (12.7) 180 MP41, 51, 53 Fig. 29 M Polyester K on WT (38.1) (19.1) Metalized Polyester Material MP41, 51, 53 Fig. 29 M Polyester K on SV (25.4) (12.7) 480 MP41, 51, 53 Fig. 29 M Polyester K on SV (28.7) (12.7) 239 MP41, 51, 53 Fig. 29 M Polyester K on SV (50.8) (25.4) Ultra ggressive dhesive Polyester MP41, 51, 53 Fig. 29 M Polyester K on WT (50.8) (25.4) Nylon Cloth Material MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (9.5) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (12.7) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 M Nylon Cloth K on WT (19.1) (12.7) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (19.1) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 M Nylon Cloth K on WT (20.9) (9.5) 1 roll (cont.) MP41, 51, 53 Fig. 33 M Nylon Cloth K on WT (22.8) (12.7) 1 roll (cont.) MP41, 51, 53 Fig. 33 M Nylon Cloth K on WT (25.4) (12.7) 1 roll (cont.) MP41, 51, 53 Fig. 33 M Nylon Cloth K on WT (25.4) (48.3) 1 roll (cont.) -595 Indoor/Outdoor Vinyl Material MP41, 51, 53 Fig. 33 MC OR-K -595 Vinyl K on OR* (12.7) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC OR-K -595 Vinyl K on OR* (19.1) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC OR-K -595 Vinyl K on OR* (25.4) 25 ft (7.6 m) 1 roll (cont.) * For additional general purpose tapes in a variety of colors, refer to the Indoor/Outdoor Grade Facility and Safety Labels. radyid.com/bmp

6 Terminal lock dhesive Strips (-498) When in terminal block mode, printer can serialize and pre-space to fit your terminal spacing Repositionable Vinyl Cloth Material - Special adhesive stays put, but marker can be removed and reapplied if necessary. Temperature range: -40 F to 175 F (-40 C to 70 C). UL Recognized. Fits Printer Models Diagram Catalog # # Material Color Label Width Roll Length MP41, 51, 53 Fig. 33 MC Vinyl K on WT (6.1) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Vinyl K on WT (8.1) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Vinyl K on WT (9.5) 16 ft (4.9 m) 1 roll (cont.) Outlet & Junction ox Labels (-422, -499 and -595) Improve safety and reduce confusion by clearly labeling outlets and equipment with labels that reference the correct panel and breaker Polyester Material - Permanent adhesive, good for powder-coated/textured surfaces. Temperature Range: -40 F to 212 F (-40 C to 100 C). UL recognized Nylon Cloth Material - Permanent adhesive. Pliable for rough or smooth surfaces. Temperature Range: -94 F to 194 F (-70 C to 90 C). UL recognized Indoor/Outdoor Vinyl Material - Permanent adhesive, very pliable, good for rough surfaces and outdoor use, wide range of colors. Temperature Range: -40 F to 180 F (-40 C to 82 C). UL recognized. Figure 29 Fits Printer Models Diagram Catalog # # Material Color Label Width Roll Length -422 Polyester Material MP41, 51, 53 Fig. 29 M Polyester K on WT (12.7) (12.7) 280 MP41, 51, 53 Fig. 29 M Polyester K on WT (25.4) (12.7) Nylon Cloth Labels MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (9.5) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (12.7) 16 ft (4.9 m) 1 roll (cont.) -595 Indoor/Outdoor Vinyl Tape MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT* (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC OR-K -595 Vinyl K on OR * (12.7) 25 ft. (7.6 m) 1 roll (cont.) * For additional general purpose tapes in a variety of colors, refer to the Indoor/Outdoor Grade Facility and Safety Labels. reaker ox & Circuit reaker Strips (-422 and -595) When in breaker box mode, the printer will create a pre-spaced, fully formatted strip spaced to fit the group of circuit breakers inside your panel. Vertical or horizontal strip orientation (vertical pictured). Specify your quantity of breakers. Mix & match 1-, 2- and 3- pole breaker spacing in the same strip. It is recommended to use the widest material that will still fit into your panel to allow for more text next to each breaker -422 Polyester Material - Permanent adhesive, good for powder-coated/textured surfaces. Temperature Range: -40 F to 212 F (-40 C to 100 C). UL recognized Indoor/Outdoor Vinyl Material - Permanent adhesive, very pliable, good for rough surfaces and outdoor use, wide range of colors. Temperature Range: -40 F to 180 F (-40 C to 82 C). UL recognized. Fits Printer Models Diagram Catalog # # Material Color Label Width Label Height -422 Polyester Material MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (15.9) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (25.4) 25 ft. (7.6 m) 1 roll (cont.) -595 Indoor/Outdoor Vinyl Tape MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT* (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT* (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT* (25.4) 25 ft. (7.6 m) 1 roll (cont.) * For additional general purpose tapes in a variety of colors, refer to the Indoor/Outdoor Grade Facility and Safety Labels. 6

7 Patch Panel and Punch lock Strips (-412, and -422) Create a fully-formatted, serialized punch block label to fit your equipment or label your ports and jacks with adhesive labels or slide-in strips Polypropylene Tags - Non-adhesive slide-in strips Polyester Material - Permanent adhesive, good for powder-coated and textured surfaces. Temperature Range: -40 F to 212 F (-40 C to 100 C). UL recognized. Fits Printer Models Diagram Catalog # # Material Color Label Width Roll Length -412 Polypropylene Tags MP41, 51, 53 Fig. 33 MC Polypropylene K on WT (9.5) 20 ft (6.1 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polypropylene K on WT (12.1) 20 ft (6.1 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polypropylene K on WT (15.8) 20 ft (6.1 m) 1 roll (cont.) -422 Polyester Material MP41, 51, 53 Fig. 33 MC Polyester K on WT (9.5) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.1) 25 ft (7.6 m) 1 roll (cont.) Port, Jack and Faceplate Labels (-422, and -595) Clearly label your faceplates, ports and /V connections using die-cut or cut-to-length continuous labels and the MP 41 printer's extensive library of over 440 symbols Polyester Material - Permanent adhesive, for powder-coated/textured surfaces. Temperature Range: -40 F to 212 F (-40 C to 100 C). UL recognized Indoor/Outdoor Vinyl Material - Permanent adhesive, very pliable, good for rough surfaces and outdoor use, wide range of colors. Figure 29 Temperature Range: -40 F to 180 F (-40 C to 82 C). UL recognized. Fits Printer Models Diagram Catalog # # Material Color Label Width Roll Length -422 Polyester Material MP41, 51, 53 Fig. 33 MC Polyester K on WT (9.5) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.1) 25 ft (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (12.7) (12.7) 280 MP41, 51, 53 Fig. 29 M Polyester K on WT (12.7) (38.1) 180 MP41, 51, 53 Fig. 33 MC Polyester K on WT (15.9) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (19.1) (38.1) 180 MP41, 51, 53 Fig. 29 M Polyester K on WT (25.4) (12.7) Indoor/Outdoor Vinyl Tape MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT* (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL-K -595 Vinyl K on YL* (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC L-WT -595 Vinyl WT on L* (12.7) 25 ft. (7.6 m) 1 roll (cont.) * For additional general purpose tapes in a variety of colors, refer to the Indoor/Outdoor Grade Facility and Safety Labels. Datacomm Rack, Shelf, ay & Equipment Labels (-422, and -595) Labeling your racks and equipment helps you know and communicate what equipment you have, where it s located and what it s connected to Polyester Material - Permanent adhesive, good for powder-coated/textured surfaces. Temperature Range: -40 F to 212 F (-40 C to 100 C). UL recognized Indoor/Outdoor Vinyl Material - Permanent adhesive, very pliable, good for rough surfaces and outdoor use, wide range of colors. Temperature Range: -40 F to 180 F (-40 C to 82 C). UL recognized. Fits Printer Models Diagram Catalog # # Material Color Label Width Roll Length -422 Polyester Material MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (15.9) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (25.4) 25 ft. (7.6 m) 1 roll (cont.) -595 Indoor/Outdoor Vinyl Tape MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL-K -595 Vinyl K on YL* (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL-K -595 Vinyl K on YL* (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL-K -595 Vinyl K on YL* (25.4) 25 ft. (7.6 m) 1 roll (cont.) * For additional general purpose tapes in a variety of colors, refer to the Indoor/Outdoor Grade Facility and Safety Labels. radyid.com/bmp

8 Indoor / Outdoor Grade Facility & Safety Labels This low-shrink, continuous vinyl material is pliable with an extremely aggressive adhesive that conforms to smooth or rough surfaces. Ideal for 5S/lean labels, pipe markers, equipment and panel labels, and production area ID. Lasting up to 8-10 years outdoors, these labels offer excellent resistance to oils, detergents, dirt, grime and many solvents Indoor/Outdoor Vinyl Material - Permanent adhesive, very pliable, good for rough surfaces and outdoor use, wide range of colors. Temperature Range: -40 F to 180 F (-40 C to 82 C). UL recognized. Fits Printer Label Width Roll Length Diagram Catalog # # Material Color Models -595 Indoor/Outdoor Vinyl Tape MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-K -595 Vinyl K on WT (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL-K -595 Vinyl K on YL (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL-K -595 Vinyl K on YL (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL-K -595 Vinyl K on YL (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC OR-K -595 Vinyl K on OR (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC OR-K -595 Vinyl K on OR (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC OR-K -595 Vinyl K on OR (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC L-WT -595 Vinyl WT on L (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC L-WT -595 Vinyl WT on L (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC L-WT -595 Vinyl WT on L (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC RD-WT -595 Vinyl WT on RD (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC RD-WT -595 Vinyl WT on RD (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC RD-WT -595 Vinyl WT on RD (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC GN-WT -595 Vinyl WT on GN (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC GN-WT -595 Vinyl WT on GN (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC GN-WT -595 Vinyl WT on GN (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-RD -595 Vinyl RD on WT (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-RD -595 Vinyl RD on WT (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC WT-RD -595 Vinyl RD on WT (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC K-WT -595 Vinyl WT on K (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC K-WT -595 Vinyl WT on K (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC K-WT -595 Vinyl WT on K (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC CL-K -595 Vinyl K on CL (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC CL-K -595 Vinyl K on CL (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC CL-K -595 Vinyl K on CL (25.4) 20 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC CL-WT -595 Vinyl WT on CL (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC CL-WT -595 Vinyl WT on CL (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC CL-WT -595 Vinyl WT on CL (25.4) 20 ft. (7.6 m) 1 roll (cont.) Need to take labeling to the next level? Check out the MP 51 Printer With many of same options as the MP 41 printer, the MP 51 printer takes your labeling to the next level with kitted 1" permasleeves, tapes up to 1.5" wide and over 100 additional label parts. It even accepts all of MP 41 printer's label cartridges. 8

9 in, Storage, 5S/Lean and General Industrial Labels (-422, -483, -499 and -595) Several materials with an aggressive adhesive for use in commercial and industrial applications Polyester Material - Permanent adhesive, good for powder-coated/textured surfaces. est on flat surfaces. Temperature Range: -40 F to 212 F (-40 C to 100 C). UL recognized Polyester Material - Permanent adhesive for powdercoated/textured surfaces. est on flat surfaces Temperature Range: -40 F to 248 F (-40 C to 120 C). UL recognized Nylon Cloth Material - Permanent adhesive. Pliable for rough or smooth surfaces. Temperature Range: -94 F to 194 F (-70 C to 90 C). UL recognized Indoor/Outdoor Vinyl Material - Permanent adhesive, very pliable, good for rough surfaces and outdoor use, wide range of colors. Temperature Range: -40 F to 180 F (-40 C to 82 C). UL recognized. Figure 29 Fits Printer Models Diagram Catalog # # Material Color Label Width Label Height -422 Polyester Material MP41, 51, 53 Fig. 33 MC Polyester K on WT (9.5) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (12.7) (12.7) 280 MP41, 51, 53 Fig. 33 MC Polyester K on WT (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Polyester K on WT (15.9) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (25.4) (12.7) 480 MP41, 51, 53 Fig. 29 M Polyester K on WT (25.4) (25.4) 260 MP41, 51, 53 Fig. 33 MC Polyester K on WT (25.4) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Polyester K on WT (38.1) (12.7) 180 MP41, 51, 53 Fig. 29 M Polyester K on WT (38.1) (19.1) Ultra ggressive dhesive Polyester Material MP41, 51, 53 Fig. 29 M Polyester K on WT (25.4) (12.7) 480 MP41, 51, 53 Fig. 29 M Polyester K on WT (50.8) (25.4) Nylon Cloth Labels MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (9.5) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (12.7) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Nylon Cloth K on WT (19.1) (12.7) 220 MP41, 51, 53 Fig. 33 MC Nylon Cloth K on WT (19.1) 16 ft (4.9 m) 1 roll (cont.) MP41, 51, 53 Fig. 29 M Nylon Cloth K on WT (20.9) (9.5) 220 MP41, 51, 53 Fig. 29 M Nylon Cloth K on WT (22.8) (12.7) 200 MP41, 51, 53 Fig. 29 M Nylon Cloth K on WT (25.4) (12.7) 180 MP41, 51, 53 Fig. 29 M Nylon Cloth K on WT (25.4) (48.3) Indoor/Outdoor Vinyl Tape MP41, 51, 53 Fig. 33 MC RD-WT -595 Vinyl WT on RD* (12.7) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC RD-WT -595 Vinyl WT on RD* (19.1) 25 ft. (7.6 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC RD-WT -595 Vinyl WT on RD* (25.4) 25 ft. (7.6 m) 1 roll (cont.) * For additional general purpose tapes in a variety of colors, refer to the Indoor/Outdoor Grade Facility and Safety Labels. Reflective Labels (-584) Reflective materials can be used for low light or inclement weather conditions on outdoor utility poles and pedestals, job-site equipment and roof-top equipment Reflective Tape - Reflective material shines back brightly when struck by light. Fits Printer Models Diagram Catalog # # Material Color Label Width Label Height -584 Reflective Tape MP41, 51, 53 Fig. 33 MC Reflective K on WT (12.7) 20 ft (6.1 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC Reflective K on WT (19.1) 20 ft (6.1 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL -584 Reflective K on YL (12.7) 20 ft (6.1 m) 1 roll (cont.) MP41, 51, 53 Fig. 33 MC YL -584 Reflective K on YL (19.1) 20 ft (6.1 m) 1 roll (cont.) radyid.com/bmp

10 MP 41 Label Printer Save time and money with MP 41 Printer Kits that include everything you need to get started. MP 41 DataComm Starter Kit Includes: (MP41-KIT-VD) 1 - MP41 Label Maker with Hard Case (MP41) White Label Roll (M ) White Label Roll (MC ) lack on Yellow Label Roll (MC YL-K) lack on White Label Roll (MC WT-K) MP 41 Electrical Starter Kit Includes: (MP41-KIT-EL) 1 - MP41 Label Maker with Hard Case (MP41) White Label Roll (M ) White Label Roll (M ) White Label Roll (M ) lack on Orange Label Roll (MC OR-K) lack on White Label Roll (MC WT-K) Part # MP41 MP41-KIT-VD MP41-KIT-EL MP41-KIT-GI Description MP 41 Label Printer with Hard Case* MP41 DataComm Starter Kit* MP41 Electrical Starter Kit* MP41 Facility ID Starter Kit* * Printer ships with MP41 printer, NiHM battery, C adapter / charger, hard case, US cable, MC WT-K cartridge, product & drivers CD, quick start guide and 2 year warranty. MP 41 Facility ID Starter Kit Includes: (MP41-KIT-GI) 1 - MP41 Label Maker with Hard Case (MP41) lack on Yellow Label Roll (MC YL-K) Red on White Label Roll (MC WT-RD) White on Green Label Roll (MC GN-WT) lack on White Label Roll (MC WT-K) White Label Roll (M ) rady360 2-Year Warranty. We have you Covered. We stand behind our products to make sure they deliver you an unrivaled customer experience. We ve strengthened our commitment to you with a rady360 2-year warranty that covers repair parts & labor, return shipping on any printer repair and lifetime technical support. With a team of 30 certified tech support and repair technicians and our 2-year warranty backing you up, you can rest assured you ll have the support you need every step of the way. See radyid.com/brady360 for full coverage details & restrictions. MP 41 Printer ccessories Part # Description Part # Description Part # Description MP41-TT MP 41 Rechargeable NiHM attery MP41-MGNET MP 41 Magnetic ccessory MP41-HC MP 41 Hard Case MP41-QC MP 41 External attery Quick Charger MP41-C MP 41 C dapter / attery Charger MP41-US MP 41 US Cable 10

11 MP 41 Printer Specifications Printer: Printer Name MP 41 Label Printer Print Resolution Thermal transfer, 300 dpi Max Lines of Print 25 Print Speed 133mm/sec (1.3in/sec) Keyboard Type QWERTY Dimensions: 11.5" x 3.6" x 6" ( 292 x 91 x 152 mm) Weight 2.6 lbs (1.2 kg) Warranty 2 Years Overmold/Rugged Operating Temp 4 to 43 C (40 to 110 F) Humidity 20% to 90% (non-condensing) Storage Temp -18 to 43 C (0 to 110 F) Continuous or Die-cut Labels Continuous and die-cut Portability, handheld Features: Memory 48 M / Up to 25,000 Labels User Profiles No Cutter Type Manual Cut Options Cut between labels or at end of print job Label Retention fter Cut Labels Per Day (verage) 250 attery Life Indicator Label Odometer (Supply Remaining) Wearability Options Magnet attachment Drop Test Drop Tested: Four foot drop Languages 11: Danish, Dutch, English, Finnish, French, German, Italian, Norwegian, Portuguese, Spanish, Swedish Units Inches or Millimeters Power: Power Supply C Power, rechargable NiMH battery attery Included attery Life 2,500 1 x2 labels Rechargeable attery, NiMH (1200mh) Re-Charge Time (estimated) 3 Hours Charging Options Internal or external with charging dock Power Source Voltage uto Shut Off 10 minutes, user configurable Print Functions: Wire and Cable Wrap Mode Cable Flag Mode Terminal lock Mode Patch Panel Mode Circuit reaker Mode anner (Landscape) anner (Portrait) Print Preview Multi-Label View No Customizable Library No Serialization arcoding 39 & 128 Date/Time Stamp (Real Time Clock) Fixed Length Mirror Print, via software Vertical Print Reverse Print Rotate Print uto Format Text Justification Horizontal: left, center or right Vertical: top, middle, bottom Multi-Copy Printing Up to 99 Copies Multi-Line Print Frame Feature Save Files Display: LCD Type / Size Custom LCD, 2.1" x 1.4" (53.34 mm x mm) LCD Resolution 240 x 160 pixels LCD Characters Font size dependent LCD acklight, user adjustable Communication and Interface Connectivity: PC Connectivity Import Data Import Manufacturer Templates / Graphics Software Compatibility Media: Type Load Labels Location Label Output Location Compatible Media Memory in Cartridge Maximum Print Width Maximum Print Length Maximum Liner Width Media Widths Included Media US - with Labelmark Software No Optional through US Cartridge Top Right Side M-, MC-, MC1- Series Cartridges (1.00" and 0.75" height only) 0.96" (24.4 mm) 39.00" (990 mm) 1.31" (33.3 mm) Various sizes from 0.235" to 1.0" (5.969mm to 25.4mm) MC WT-K 1.00" (25.4mm) lack on White Vinyl Tape Number of Stock Parts 100+ Color Print Capability Single print color on a label lack on: White, Clear, Yellow, Orange, Silver vailable Media Colors White on: Clear, Red, lue, Green, or lack Red on: White Cartridge Width Detection Cartridge Setting Detection Custom Labels vailable Compliance gency pprovals FCC Class, ICES003 RoHS compatibility Pass Patents One or more patents apply including: US , , Harmonization Code (HTS Schedule or ) / Trade ; Country of Origin: Malaysia (printer); ECCN: ER99 MSDS For attery MSDS visit Fonts, Graphics, Symbols Text Sizes 4 to 103pt + autosizing Number of Fonts (2) rady lpine and rady Fixed Width Number of Symbols 450 Special Characters 123 rrows, Datacomm, Electrical, Exit, Fire, First id, CLP/ Symbol Categories GHS, Greek, Home Electrical, HSID, International, Laboratory, Mandatory, Misc, Packaging, PPE, Prohibition, Public Info, Safety, Warning, WHMIS MP 41 Label Printer Media Offering M-, MC-, MC1- Series Cartridges (1.00" and 0.75" height only) 0.75" (19.05mm) cartridge houseing height -422 dhesive Polyester Permasleeve Heat Shrinking Tube Polypropylene Tag Self Laminating Vinyl Metalized Polyester Ultra ggressive Polyester Repositionable Vinyl Cloth Nylon Cloth Reflective Tape Indoor/Outdoor Vinyl " (25.4mm) cartridge houseing height radyid.com/bmp

12 Printable rea #1 The MP 41 Label Printer Does It ll. Printable rea #2 Flag Label with Two Printable reas Wrap-around utomatic Label Formatting Tape Widths 0.25 to 1.0 Die-Cut and Continuous Label Supplies (25.4 mm) Self-Laminating 100 Label Parts, 11 Label Materials 300 dpi Print Sharpness (19.05 mm) Continuous and 0.75" (19.05 mm) Die-Cut PermaSleeves 450 Symbols 12 Font Sizes and dvanced Text Editing Options (12.7 mm) Die-Cut Labels PC-Connectivity (9.5 mm) Learn more about the MP 41 Label Printer visit: radyid.com/bmp41 US Customer Service: Inside Sales: Canada Customer Service: Mexico Inside Sales: ext rady Worldwide Inc. LL RIGHTS RESERVED